8th December 2010, 08:22 PM | #1 |
EAAF Staff
Join Date: Feb 2005
Location: Centerville, Kansas
Posts: 2,196
|
Something New
Hello,
I just picked this up off of ebay. A Visayan piece but with this blade style I'm not sure whether to call it a tenegre or not? Below are the auction pictures. It does look to have small metal plates attached to the hilt that could be silver. I will know more after it arrives. All comments are welcome. Robert |
9th December 2010, 01:05 AM | #2 |
EAAF Staff
Join Date: Dec 2004
Location: Louisville, KY
Posts: 7,219
|
According to recent research on Iloilo (Nacho and Migueldiaz) this would be called a tenegre and called this and used by the lowlanders of Iloilo.
Also I looks like silver and brass are combined, but you can tell better after you clean them. What is nice is that it looks like silver is used for on the eyes and perhaps other parts of the head. Will look great after it is all cleaned up. |
9th December 2010, 11:04 PM | #3 |
EAAF Staff
Join Date: Feb 2005
Location: Centerville, Kansas
Posts: 2,196
|
Thank you Jose for the information and for confirming that this is a tenegre. Like I stated earlier I have never seen one with a blade in this style. I am really looking forward for this to arrive so I can find out how many silver and brass plates that there are on the hilt. The second picture down on the left seems to indicate that there could be quite a few. I am also very interested in the throat piece on the scabbard and if this sword has a guard or not.
Robert |
10th December 2010, 04:07 AM | #4 |
Member
Join Date: Oct 2008
Location: Manila, Phils.
Posts: 1,042
|
Hello. Yes, it's a tenegre (pronounced, tee-NEE-greh).
Nacho is the expert on this. Earlier, he told us that -- "The Iloilo Museum has identified 5 hilt variants of the Panay sword: 1) the classic short nose tenegre (found all over lowland Panay); 2) the long-nosed sanduko of the Panay Bukidnons/Mundo; 3) the Open Mouth/crocodile Mouth pommel (made until now in Antique, particularly the town of Adiong), which some people say is Negros (it is not); 4) the human monster face with large eyes and menacing teeth ,sometimes made of bone (made in the vicinity of Cabatuan, Iloilo; and : 5) the plain rounded/pistol grip found in binangons from Iloilo Province (older ones made of carabao horn). [item] 1) has a sub-variant that looks like it has two horns in addition to the short nose."As to what they look like, I've blogged about them here(1), here(2), here(3), here(4), and here(5). The variant of (1), the three-horned fellow, is here. |
10th December 2010, 04:52 PM | #5 |
Member
Join Date: Aug 2007
Location: Germany, Dortmund
Posts: 8,769
|
Hello Robert,
let me add that it is a beautiful sword and I hope that you will post better pictures when you received it. Regards, Detlef |
10th December 2010, 05:34 PM | #6 |
EAAF Staff
Join Date: Feb 2005
Location: Centerville, Kansas
Posts: 2,196
|
Migueldiaz, Thank you for your interest and for the links that you posted. I am a very frequent viewer of your web site and had already seen all of the information that you referred to in the links. I was just concerned because of the blade shape that this sword might be a variant and have a different name. Again my thanks for your help.
Detlef, Thank you for your kind words and I will be more than happy to post more pictures of this sword as soon as it arrives and I have a little time to clean it up a bit. Again, my thanks to everyone who has commented on this and for all their help. P.S. Nacho, If you have the time I would really like to have your thoughts on this piece. Robert |
14th December 2010, 09:15 PM | #7 |
EAAF Staff
Join Date: Feb 2005
Location: Centerville, Kansas
Posts: 2,196
|
Well the tenegre has arrived with a few nice surprises.
All of the decorative fittings on the hilt are silver except for the guard and it seems to be a brass alloy of some kind. There are quite a few of the silver decorations on the hilt missing but for everyone that is missing the corresponding one is still intact. The decorations on the scabbard are mostly brass with a few being made of silver and I believe the missing band at the throat of the scabbard would have been made of silver. The wood of the scabbard has shrunk so much over the years that the guard will not fit into place anymore and the brass bands are very loose and are just put into place for the pictures. It looks like I will be busy for quite some time making the missing pieces of silver decorations for the hilt and scabbard but it will be time well spent. Sorry about the poor picture quality. Robert |
14th December 2010, 09:35 PM | #8 |
(deceased)
Join Date: Dec 2004
Location: East Coast USA
Posts: 3,191
|
Sweeeet... Congrats
|
14th December 2010, 10:16 PM | #9 |
Member
Join Date: Oct 2008
Location: Manila, Phils.
Posts: 1,042
|
She is beautiful! Congrats, Robert.
I love looking at these well-adorned pieces. You can tell that the original owner was an important person, or perhaps simply dapper, if not flamboyant |
14th December 2010, 10:21 PM | #10 |
Member
Join Date: Oct 2008
Location: Manila, Phils.
Posts: 1,042
|
This sword (below) from the same island of Panay (or perhaps Negros?), has a somewhat similar guard design.
|
14th December 2010, 11:21 PM | #11 |
EAAF Staff
Join Date: Dec 2004
Location: Louisville, KY
Posts: 7,219
|
Very nice Robert and nice clean up.
Migueldiaz - nice piece also - not seen it before. |
15th December 2010, 06:06 PM | #12 |
Member
Join Date: Aug 2007
Location: Germany, Dortmund
Posts: 8,769
|
Wow, beautiful sword! (I am a little bit green with envy)
It is worth to spend time to replace the missing silver decorations. Regards, Detlef |
15th December 2010, 06:22 PM | #13 |
Member
Join Date: Jun 2008
Location: The Sharp end
Posts: 2,928
|
Its beautiful Robert!
I look forward to seeing it when you have worked even more magic on it. Gene |
16th December 2010, 04:03 AM | #14 |
EAAF Staff
Join Date: Feb 2005
Location: Centerville, Kansas
Posts: 2,196
|
Hello everyone and I would like thank you all very much for your kind words on this the newest addition to my collection. I really do think I lucked out when I found this one.
Migueldiaz, that is a great tenegre you posted and the guard does look similar to the one on mine. Please if you would, post more pictures as I too would love to see them. Does it have its scabbard? Just as soon as I get the repair work done on this I will be posting more (and I hope better) pictures of it. There are 20 pieces of silver decoration that are missing from the hilt alone and making and attaching the replacements will surely keep me busy for quite some time!! One question I have is, does anyone have any suggestions on the best way to clean the raw hide at the throat of the scabbard? On normal leather I usually use saddle soap and then follow that up with mink oil but I'm just not sure what would be the best way to clean this type of leather. Again, my thanks to you all for your comments. |
16th December 2010, 04:49 AM | #15 |
Member
Join Date: Dec 2004
Posts: 1,002
|
Good job on cleaning up the piece. What a beautiful blade profile.
Did you wax the scabbard? I love the color of the kamagong, Congrats. |
16th December 2010, 05:15 AM | #16 |
Member
Join Date: Dec 2004
Location: Kernersville, NC, USA
Posts: 793
|
Beautiful piece and nice job so far! A very worthy project.
Steve |
16th December 2010, 05:16 AM | #17 |
EAAF Staff
Join Date: Feb 2005
Location: Centerville, Kansas
Posts: 2,196
|
Hello Kino, yes I used Ren wax on the wood of the scabbard after a good cleaning with Murphy's oil soap. The wood actually looks even better in person than it does in the pictures and is extremely hard and heavy for its size. One would think that after all the pictures that I have taken over the years that I could do a better job of it than what I do.
The blade profile was one of the first things that caught my attention when I first found this. I have a bolo with a D-guard that has a blade profile almost identical (only larger) to the one on this tenegre. Steve, thank you so much for your encouragement. I just hope that I am up to its successful completion. Again, I would like to thank you both for your kind comments. Robert Last edited by Robert Coleman; 16th December 2010 at 05:29 AM. |
16th December 2010, 02:52 PM | #18 |
Member
Join Date: Oct 2008
Location: Manila, Phils.
Posts: 1,042
|
battara, thanks.
robert, here are two pics from erik farrow once again. the metal hoops on the scabbard are aluminum. thanks. |
16th December 2010, 07:45 PM | #19 |
EAAF Staff
Join Date: Feb 2005
Location: Centerville, Kansas
Posts: 2,196
|
Migueldiaz, Great sword, thank you for posting the pictures for comparison. Do you think that there could possibly have been a wooden throat piece on the scabbard right above the leather piece (similar to the one on my example) that is now missing ? Is this tenegre yours now or is it still in Eric's collection?
Robert |
16th December 2010, 11:19 PM | #20 |
EAAF Staff
Join Date: Feb 2005
Location: Centerville, Kansas
Posts: 2,196
|
Kino, Here is a picture of the D-guard bolo I mentioned earlier with the tenegre to show the similarity in blade profile. The blade on the bolo is quite a bit heavier but it has the same false edge that the tenegre has but unlike the tenegre it is not chisel ground. Unfortunately the tip on the bolo's blade had suffered some damage at some point in time and was slightly re profiled when repaired. I am also hoping to get a little more background on the bolo so any comments or information on it would be greatly appreciated.
Robert |
17th December 2010, 05:30 AM | #21 | |
Member
Join Date: Oct 2008
Location: Manila, Phils.
Posts: 1,042
|
Quote:
|
|
19th December 2010, 01:19 AM | #22 |
EAAF Staff
Join Date: Feb 2005
Location: Centerville, Kansas
Posts: 2,196
|
hi, robert. the sword is now with me. i'll take a look later on whether a 'throat' piece used to be there. regards.
Migueldiaz, That's great, a very nice addition to your collection. I'm not sure if 'throat piece' is the correct terminology/name for this section of the scabbard, or if it even has one, but if you by chance know what the correct name for this section is could you please post it? The only other scabbard that I have seen so far that is even similar is located here http://www.filhistory.com/2010/07/su...tenegre-1.html on one of your web pages. Would you also tell me what your thoughts are on the above bolo? Here is a link to the original thread on it. http://www.vikingsword.com/vb/showth...hlight=funston Thank you for your help. Robert Last edited by Robert Coleman; 19th December 2010 at 04:35 AM. |
19th December 2010, 11:56 PM | #23 | |
Member
Join Date: Oct 2008
Location: Manila, Phils.
Posts: 1,042
|
Quote:
i don't know the local name of the leather 'throat' or collar. but in the online hiligaynon 1934 dictionary (hiligaynon is one of the dialects in panay island, from where the swords are), we find this entry: panílo, (Sp. pañuelo) Cloth, cloth-band, collar, neckcloth; the strip of cloth or leather used for fastening the sheath of a bolo to the hip. (cf. balióg; pányo)thus, panilo (pronounced pah-NEH-lo) can refer to anything that wraps around something. for now perhaps, we can use panilo to refer to that leather 'throat' or collar. nacho or reichsritter can confirm (and for sure later, we'll have the opportunity again to double-check with local smiths). talking about that online dictionary, here are the other terms: binángon, The Philippine long knife carried in a scabbard on the hip by workmen. The scabbard or case is called "tagúb" (cf. bólo, pinútì, siántong, sandúkò, ginúnting, talibóng, kális, súndang, uták). the downloadable version of the dictionary is here. it's better to have the download version, as one can search there using english terms. more field research needs to be done to match the blade shapes, vis-a-vis the terms above. it will also be noted that tenegre (tinigre) is not an entry in the dictionary. but for a fact, the term is being used in panay. again more research is needed on the origin of that word. another noteworthy local linguistic variation is the definition of sundang in panay. elsewhere (northern philippines [luzon] and south. phils. [mindanao]), a sundang is a large blade. a kris in mindanao for instance is also called a sundang. but in panay, a sundang is a mere kitchen knife! |
|
20th December 2010, 12:42 AM | #24 |
Member
Join Date: Oct 2008
Location: Manila, Phils.
Posts: 1,042
|
robert, here's a pic of the scabbard with the leather panilo lowered down. perhaps there used to be something that's attached on that upper part of the scabbard because a pinhole can be seen (and said hole is also on the other side). the panilo seemed to have been altered also.
on mode of construction of the scabbard here, it makes use of dowels, where the 'crown' of the scabbard slides into (see pics below). finally, on the sword with the d-guard, i don't have anything to add that you already know (i.e., it's a luzon sword, given the peened tang and the non-chisel ground profile of the blade). incidentally, i might be in the u.s. sometime august 2011. can i go to your place to see your collection? |
20th December 2010, 01:14 AM | #25 |
EAAF Staff
Join Date: Feb 2005
Location: Centerville, Kansas
Posts: 2,196
|
Migueldiaz, Thank you so much for the dictionary and the detailed pictures of how the "crown" is mounted. As far as you coming by to view my collection and visit I would be more than honored. Just let me know a couple of weeks in advance as my wife does not like surprises. Again my thanks.
Robert |
20th December 2010, 02:51 AM | #26 | |
Member
Join Date: Oct 2008
Location: Manila, Phils.
Posts: 1,042
|
Quote:
will give you the heads-up. we definitely do not want to surprise anybody especially if within her easy reach is an arsenal of sharp pointy things p.s. - by the way, as kino mentioned, kamagong is the wood used for the scabbard of your sword. kamagong is arguably the rolls royce of our local hardwood. |
|
20th December 2010, 03:45 AM | #27 |
Member
Join Date: Aug 2007
Posts: 293
|
Excellent information by migueldiaz!
|
20th December 2010, 04:34 AM | #28 |
EAAF Staff
Join Date: Dec 2004
Location: Louisville, KY
Posts: 7,219
|
Oh Kamagong is so very hard - it is also called Makassar Ebony. Tough stuff and harder than narra or paduk wood, and dulls your tools!
Beautiful wood though, especially the subtle grains in some pieces. Makes great contrast to ivory or bone inlays. |
21st December 2010, 01:43 AM | #29 |
EAAF Staff
Join Date: Feb 2005
Location: Centerville, Kansas
Posts: 2,196
|
Hello Migueldiaz, You would never need to worry about my wife ever thinking about using a sharp pointy object on any guest. It would be my hide that would be it danger if I wasn't to give her advanced warning of their arrival. We are both looking forward to your visit.
Robert |
21st December 2010, 11:13 AM | #30 | |
Member
Join Date: Oct 2008
Location: Manila, Phils.
Posts: 1,042
|
Quote:
For the others' academic interest, here are some more blade-related terms from that 1934 dictionary: baláraw, Dagger, poniard, stiletto, knife. (cf. dága, punyál).Incidentally, in the olden times (and perhaps even up to now) one of the fiercest adversaries of the Moros are the Panaynons. If the latter have specific names for various spearheads (e.g., kinúgon, pinángdan, kinabasî) chances are the former have their own terms, too. I hope someday, someone will write about 'Moro Spears & Other Weapons' |
|
|
|