![]() |
|
![]() |
|
Thread Tools | Search this Thread | Display Modes |
![]() |
#1 |
Member
Join Date: Jan 2013
Location: Netherlands
Posts: 188
|
![]()
The topic of maintaining/beautifying a wrongko comes up here and there on this forum. There, however, appears to be no thread uniquely devoted to this topic. I'd like to suggest to use this thread for exactly that purpose, i.e. to share ways, materials, tips & tricks, and pitfalls of performing work on wrongkos.
In order to keep things informative, it could be helpful to explain the "why" behind certain actions. The "why" could, e.g., entail: - giving a polished appearance - protecting against dirt - preserving the wood - maintaining the current appearance - repairing/hiding small defects (emphasis on small) I hope this thread will provide members with some new knowledge which they'll be able to apply to their own keris collection. |
![]() |
![]() |
![]() |
#2 |
Vikingsword Staff
Join Date: Nov 2004
Posts: 6,287
|
![]()
Here is an old thread that I started about a repair I had to make after a disastrous accident with a brand new Surakarta ladrang .
![]() http://www.vikingsword.com/vb/showth...ghlight=repair I like using orange shellac when appropriate . |
![]() |
![]() |
![]() |
#3 |
Member
Join Date: Aug 2007
Location: Germany, Dortmund
Posts: 8,730
|
![]()
And here an old thread where have been done repair and maintaining by a small Peninsula keris from my collection: http://www.vikingsword.com/vb/showth...4&page=2&pp=30
And here an old thread where I bring a tajong back to old glory: http://www.vikingsword.com/vb/showthread.php?t=11844 |
![]() |
![]() |
![]() |
#4 |
Keris forum moderator
Join Date: Aug 2006
Location: Nova Scotia
Posts: 7,098
|
![]()
I am a big fan of Butcher's Bowling Alley Wax. I think they went out of business, but i believe a company called BWC is still making this product.
|
![]() |
![]() |
![]() |
#5 | |
Member
Join Date: Jan 2013
Location: Netherlands
Posts: 188
|
![]() Quote:
|
|
![]() |
![]() |
![]() |
#6 | |
Keris forum moderator
Join Date: Aug 2006
Location: Nova Scotia
Posts: 7,098
|
![]() Quote:
![]() |
|
![]() |
![]() |
![]() |
#7 | |
Member
Join Date: Jan 2013
Location: Netherlands
Posts: 188
|
![]() Quote:
![]() |
|
![]() |
![]() |
![]() |
#8 | |
Keris forum moderator
Join Date: Aug 2006
Location: Nova Scotia
Posts: 7,098
|
![]() Quote:
![]() |
|
![]() |
![]() |
![]() |
#9 | |
Member
Join Date: Jan 2013
Location: Netherlands
Posts: 188
|
![]() Quote:
|
|
![]() |
![]() |
![]() |
#10 | |
Keris forum moderator
Join Date: Aug 2006
Location: Nova Scotia
Posts: 7,098
|
![]() Quote:
With the BWC wax you cover it with a thin layer of wax, let it sit for a few minutes and then polish it with a soft cloth. It creates a really nice temporary finish that protects the wood nicely. But be prepared to pick out any globs of wax left in the crevices with a toothpick if you have a lot of carved details. |
|
![]() |
![]() |
![]() |
#11 |
Member
Join Date: May 2006
Posts: 6,853
|
![]()
The original finish on most wrongkos is french polish, ie, shellac applied with a rubber, probably a standard piano finish of upwards of 16 applications is desireable.
A shortcut is apply the shellac or varnish with brush, kill it, and rub back with rotten stone. Tru oil will give a good "fake finish". It requires absolutely no skill in use and gives a good hard durable finish, if you want imitate the finish of an older wrongko gently take off the gloss with 0000 steel wool. If you do not want to re-finish, but just lift the finish a bit, silicon car polish mixed with old fashinoned turps, ie, not mineral turps, and used with a rubber will get rid of the dead varnish without damaging the surface. Danish oil can be used in a similar way to Tru oil. If you just want to lift the finish a bit, a hand rub with baby oil will make any wrongko look about 100 times better. A good quality furniture wax such as Antiquax will protect the finish you have created. A "rubber" is a small square of linen or cotton cloth packed tightly with cotton wool and the ends twisted to create a little ball , you dip this into whatever you're using to load it and then you apply the finish by working in a figure of eight pattern. When doing a complete refinish the wood should be feathered before applying the finish. The traditional way to finish wood was with a damp cloth and a hot iron, these days we use a steam iron. This raises the grain and then the wood is polished back with steel wool, you continue until the grain does not raise any longer and your final polish before application of the finish is with 0000 steel wool. |
![]() |
![]() |
![]() |
#12 |
Member
Join Date: Jan 2013
Location: Netherlands
Posts: 188
|
![]()
Thanks to you both, David and Alan,
Lots of useful tips! BWC wax sounds like the easiest method. Is there any noticeable advantage to using something like Tru Oil or Danish oil, which seem to be more labour-intensive? |
![]() |
![]() |
![]() |
#13 | |
Keris forum moderator
Join Date: Aug 2006
Location: Nova Scotia
Posts: 7,098
|
![]() Quote:
As Alan says, you can create a look similar to the traditional French polish with it. If i am simply trying to maintain the current finish i will apply Butcher's wax as a final step after cleaning the piece up a bit. ![]() |
|
![]() |
![]() |
![]() |
#14 |
Member
Join Date: Nov 2009
Posts: 169
|
![]() |
![]() |
![]() |
![]() |
#15 | |
Member
Join Date: Jan 2013
Location: Netherlands
Posts: 188
|
![]() Quote:
Sirek: a good introduction on how to use wax; a good addition to the thread. |
|
![]() |
![]() |
![]() |
#16 | |
Keris forum moderator
Join Date: Aug 2006
Location: Nova Scotia
Posts: 7,098
|
![]() Quote:
|
|
![]() |
![]() |
![]() |
|
|