11th June 2018, 03:18 AM | #1 |
Member
Join Date: Apr 2014
Posts: 233
|
An Italian Falchion
Got this at auction a little while back but just now got a chance to take good pictures. It was described as a Falchion with composite rapier guard. On closer inspection, it's obvious the guard was made for this blade and is not from a rapier. After some research and help from a friend, I found other examples with similar guards. Obviously, the pitting on the blade does not match the wear on the guard. Perhaps the guard was originally blackened?
All thoughts welcomed. Does anyone recognize the SZ mark? Last edited by CSinTX; 11th June 2018 at 04:23 PM. |
11th June 2018, 03:47 PM | #2 |
Member
Join Date: Jan 2012
Location: FRANCE
Posts: 1,065
|
Rapier blade ??
based on the pictures look very nice ! I would not be worry about the difference of oxidation blade /hilt they are different metal. See the bellow picture with a similar blade.Venetian Falchion, circa 1600-1610 Best CERJAK |
14th June 2018, 09:25 PM | #3 |
Member
Join Date: Apr 2014
Posts: 233
|
I meant to say rapier guard, not blade.
Thanks Cerjak for the pics. I had not seen that one. I see your example has the same "typewriter" style font on the blade and looks to also have similar file marks on the guard. There is this one with the more complex hilt at the Stiftung Baumann museum in Germany. Thanks to Carl Koppeschaar for his pictures. |
12th January 2020, 04:25 PM | #4 |
Member
Join Date: Apr 2014
Posts: 233
|
Just adding to the record here. A similar example recently listed at HH.
https://www.hermann-historica.de/en/...s/lot/id/33895 "Sturdy, slightly curved single-edged blade with double-edged point and narrow fuller on either side. Struck right underneath the back a frieze of scrolling leaves. The ricasso struck on both sides with a Cesar head mark. Finely ridged bar hilt, the obverse lower bar in the form of a stylised fleur-de-lis. Grip with fine iron wrap and Turk's heads. The shoulder of the blade with old, white collection number, attached to the hilt a copper mark with the number "136". Flat pommel ridged on either side. Length 86.5 cm. Provenance:Collection Galopim, Geneva." |
12th January 2020, 06:06 PM | #5 |
Member
Join Date: Dec 2004
Location: Europe
Posts: 2,718
|
I am not into European weapons, but could the SZ stand for the canton Schwyz in the central part of Switzerland just north of the Alps?
|
12th January 2020, 11:48 PM | #6 |
Member
Join Date: Jan 2011
Posts: 1,079
|
Very nice and interesting swords, an Italian take on basket hilt shearing swords.
|
13th January 2020, 07:39 AM | #7 | |
Member
Join Date: Dec 2014
Location: Black Forest, Germany
Posts: 1,204
|
Quote:
Last edited by corrado26; 13th January 2020 at 07:52 AM. |
|
13th January 2020, 03:08 PM | #8 |
Member
Join Date: Apr 2017
Location: Sweden
Posts: 695
|
According to Staffan Kinman’s excellent European Makers of Edged Weapons, Their Marks (2015) the mark Z B is for Zeughaus Bern from around 1540.
If you consult Schneider’s Waffen im Schweizerischen Landesmuseum (1980) you may find what Z S stands for. |
13th January 2020, 05:06 PM | #9 | |
Member
Join Date: Dec 2014
Location: Black Forest, Germany
Posts: 1,204
|
Quote:
|
|
13th January 2020, 08:16 PM | #10 | |
Member
Join Date: Apr 2017
Location: Sweden
Posts: 695
|
Quote:
|
|
13th January 2020, 08:58 PM | #11 |
Member
Join Date: Jan 2020
Posts: 13
|
In my opinion is a north Italian storta, or coltella, I am 99% sure of this, pommel does not belong originally with the sword, the "classic" pommel for this tipe of sword is the one mounted in the example posted by @Cerjak.
About the guard, could be a local style, it seems that the "base" is the classic storta guard with added extra arms on the side. Here you can see a storta made in Caino (near Brescia). Also Decorations on the blade confirms that has been made in Italy. Here you can find some additional infos about this tipology of sword. https://www.hema-minsk2019.org/base_...ibition-part-3 About the SZ mark...yes could be an arsenal mark, considering this is a infantry weapon, very common and cheap. On the other hand there are many examples about initials of the maker in Italian blades. Cheers Giovanni |
13th January 2020, 10:04 PM | #12 |
Member
Join Date: Apr 2017
Location: Sweden
Posts: 695
|
Zeughaus Solothurn in Switzerland?
|
13th January 2020, 11:02 PM | #13 | |
Member
Join Date: Apr 2014
Posts: 233
|
Quote:
Do you have any thoughts on the grip of mine? It seems old to me. Best, Casey |
|
13th January 2020, 11:39 PM | #14 |
Member
Join Date: Apr 2014
Posts: 233
|
A couple more just for comparison.
Czernys 2011 |
13th January 2020, 11:43 PM | #15 |
Member
Join Date: Apr 2014
Posts: 233
|
Czernys 2019
|
14th January 2020, 07:04 PM | #16 | |
Member
Join Date: Jan 2020
Posts: 13
|
Quote:
About your handle, I miss to say that, it seems the original, many swords have been disassembled to replace "poor" handles like this with iron wire covered ones. In my opinion a soldier sword like this would have a very simple handle like the one you have. There are another example with similar handle, I must find it! |
|
15th January 2020, 01:04 PM | #17 | |
Member
Join Date: Jul 2014
Posts: 400
|
The round pommel is Original and just a variation on this type of falchion, as you can see on this piscture of the antique arms museum in San Marino Italy and in various books.
kind regards Ulfberth Quote:
|
|
15th January 2020, 09:41 PM | #18 |
Member
Join Date: Jan 2020
Posts: 13
|
In the 99% of the original I have seen the pommel has flat sides, you can found very complex decorations and forms, but the geometry has that charateristic.
I am sorry but a round pommel makes me suspicious on this swords. Too easy to take a rapier or a sidesword pommel and to complete a storta. I have had chance to read old bills (XIX cent) of "restoration" of important arms and armour collection. You can not imagine how many pieces has been "completed" with old parts or ex-novo pieces. My experience has made me very suspicious even to the books. Just my two cents Cheers Giovanni |
16th January 2020, 09:56 AM | #19 |
Member
Join Date: Jul 2014
Posts: 400
|
I understand, but the geometry or style of the hilts branches, wich is faceted returns in the pommel also faceted. One also needs learn how the see the difference between recent composits or working life assembly. In this period these items were not reglementary made , as you can see in the museum were they are showing the different variations.This is what my experience tells me , I have been collecting for more than 42 years.
kind regards Ulfberth Last edited by ulfberth; 16th January 2020 at 10:17 AM. |
17th January 2020, 11:07 AM | #20 |
Member
Join Date: Apr 2017
Location: Sweden
Posts: 695
|
A wellknown German auction house had this interesting sword up for sale last year. It is marked AVODNES which is not familiar to me. Backwards it’s SENDOVA which might make more sense but no more familiar.
Last edited by Victrix; 18th January 2020 at 09:13 AM. |
20th January 2020, 05:37 PM | #21 |
Member
Join Date: Jun 2005
Posts: 256
|
I think I saw recently similar examples at Venice Ducal Armoury. The book by Umberto Franzoi shall be coming to me.
|
24th January 2020, 12:56 PM | #22 | |
Member
Join Date: Jun 2005
Posts: 256
|
Quote:
|
|
|
|