Tulwar Fever Single Edged Tulwar

archer · 22nd May 2013, 04:33 AM

The downward cant of the hilt caught my eye as i'm one of those who find the straight hilts bother the back of my hand at the wrist on downward motions. This one is single edged very flexible with an extreme taper from 5/16s over a 1/4 inch at the hilt down to under a 1/16th of an inch at the tip. The blade has several edge nicks. The hilt disk is free to rotate and decorated by a circle of dots. I guess the pommel finial is a parrot there is a simple pin holding the dick on. Is this a hunting tulwar? oh , the disk has a flat area, like it was attached more recently.

archer · 23rd May 2013, 08:51 AM

Additional data: Blade length 30.5 inches width at widest sharpened area 1 1/8 inch. Hilt space is across the top 3.5 inches, under side measurements 2 7/8s of an inch. Sword weighs 1.5 pounds. Balance point is 5 inches out on the blade flat. Would this type of blade shape used for hunting? Non armored combat? Are there others like this out there or was this one made to suit someones fighting style?

A.alnakkas · 23rd May 2013, 09:42 AM

Hey Archer,

Cool group, I like the curvey ones.

I noticed (as probably alot did too) that the Indians way of sharpening is abit unforgiving on the blade.. I'd guess that this sword looked alot different when it was made.

Give it an etch, I'd guess its potentially wootz.

A.alnakkas · 24th May 2013, 11:10 PM

Here is one of my tulwars, the blade changed shape on this one too due to sharpening... Its wootz.

archer · 25th May 2013, 01:45 AM

Hi Lotfy, Nice high contrast wootz on the blade. I believe that the punch marks are from Bikaner Armory. Nice catch was it an Arabian from Ardha? Steve

A.alnakkas · 25th May 2013, 02:01 AM

Hey Steve,

Thank you. No this one was not in Arabia.

When I said that there was Indian swords and blades used by Arabs, I ment real time use rather than ardha dance. This I built on 2 family heirlooms, 2 friends own their great grandfather's swords and both are Indian. One has the all steel shamshir like hilt (will try to find similar photos) and the other had hilt with a tiger head. They were used in a time that the swords were used for combat.. The most interesting part is that they werent rehilted.

For the ardha dance, a badawi hilt or Persian style would be far more comfortable.

ariel · 25th May 2013, 07:25 PM

Tulwars with down-turning handles in my admittedly limited experience always come from the South. This one also has Deccani motive: little balls at the ends of quillons.

Northern handles are as a rule straight.
My 2 cents worth :-)

Jim McDougall · 25th May 2013, 07:45 PM

Good note on the canted pommel being a southern characteristic, if you consider a ayda katti from the Coorgs on the western side. It seems this is a distinctive feature on these.
I would note that the pierced dots in the langet are a feature often seen on Afghan tulwars and from the northern regions, and of course the elongated pommel stem seems aligned with the khanda/firangi group of hilts. There is a profound connection between the Deccan and the Afghan regions along with the obvious context with those routes, so specific regional attribution would be pretty tough.

Flavio · 25th May 2013, 07:54 PM

I think that it's time for a CLASSIC thread on tulwars.....

A.alnakkas · 25th May 2013, 09:24 PM

Well, here is another tulwar (used to be in my collection, sold to a friend.) the hilt is sindh variety which is longer than the usual Indian ones...

The blade is wootz, Assadullah stamp abit worn out. I dont think this is an authentic assadullah though, and the construction of the blade looks Persian at first but the blade has a very short ricasso at the end of the tang..

archer · 26th May 2013, 05:58 AM

Hi All, Thanks for your input. Swords have not been My thing in the past but, they are growing on Me. Searches of old posts bring up the Pedang downward pommel on a firangi pedang . I remembered this miniture and others of hunts using swords and though I can't prove it the downward hilt seems perfect for downward strikes from a horse. Ariel mentioned the little balls at the end of the quillions, in this case they seem to be leaf pedals on a "lotus" bud. Flavio has it exactly right we need a " Clasic Tulwar Thread". I can't offer much information but, stand amazed at the different handling characteristics even these three swords bring out. Any ideas on the era this one started out in. Thanks, Steve

kahnjar1 · 26th May 2013, 09:04 AM

Quote:

Originally Posted by archer

Hi All, Thanks for your input. Swords have not been My thing in the past but, they are growing on Me. Searches of old posts bring up the Pedang downward pommel on a firangi pedang . I remembered this miniture and others of hunts using swords and though I can't prove it the downward hilt seems perfect for downward strikes from a horse. Ariel mentioned the little balls at the end of the quillions, in this case they seem to be leaf pedals on a "lotus" bud. Flavio has it exactly right we need a " Clasic Tulwar Thread". I can't offer much information but, stand amazed at the different handling characteristics even these three swords bring out. Any ideas on the era this one started out in. Thanks, Steve

Interesting.... I have always thought that Firangi was from India and Pedang was from Indonesia. Never heard of the combined term before......

archer · 26th May 2013, 05:05 PM

Stu you are correct. Points out my need for more sword information and definitely double checking my comments. This sword has more Pedang like characteristics. Steve

Jim McDougall · 29th May 2013, 08:56 PM

Quote:

Originally Posted by Flavio

I think that it's time for a CLASSIC thread on tulwars.....

I think the book that Robert Elgood has coming out in September will have significant notice on tulwars (see Jens' post in swap forum).

archer · 30th May 2013, 04:10 PM

Jim, Books are all important to gleaning information on the things we collect. Your great recall and studies were spot on about this sword. your mentioned of this hilt reminding you of Coorg Ayda Katti hilts left me puzzled, at first I could only find examples of the straight ones.
Ariels and your comment brought me to these examples the piercing on a Tulwar and the plain disc on another Tulwar. I will look for the book when it comes out. Thanks

Ibrahiim al Balooshi · 31st July 2013, 10:25 PM

Quote:

Originally Posted by Flavio

I think that it's time for a CLASSIC thread on tulwars.....

Salaams Flavio ~ I agree on a classic thread study and have suggested we expand the thread http://www.vikingsword.com/vb/showth...t=10693...into such a resource as it already contains excellent material on hilts etc.

Regards,
Ibrahiim al Balooshi.

22nd May 2013, 04:33 AM	#1
archer Member Join Date: Mar 2005 Posts: 373	Tulwar Fever Single Edged Tulwar The downward cant of the hilt caught my eye as i'm one of those who find the straight hilts bother the back of my hand at the wrist on downward motions. This one is single edged very flexible with an extreme taper from 5/16s over a 1/4 inch at the hilt down to under a 1/16th of an inch at the tip. The blade has several edge nicks. The hilt disk is free to rotate and decorated by a circle of dots. I guess the pommel finial is a parrot there is a simple pin holding the dick on. Is this a hunting tulwar? oh , the disk has a flat area, like it was attached more recently. Attached Images

23rd May 2013, 08:51 AM	#2
archer Member Join Date: Mar 2005 Posts: 373	Hunting Blade? More data Additional data: Blade length 30.5 inches width at widest sharpened area 1 1/8 inch. Hilt space is across the top 3.5 inches, under side measurements 2 7/8s of an inch. Sword weighs 1.5 pounds. Balance point is 5 inches out on the blade flat. Would this type of blade shape used for hunting? Non armored combat? Are there others like this out there or was this one made to suit someones fighting style?

24th May 2013, 11:10 PM	#4
A.alnakkas Member Join Date: Nov 2010 Location: Kuwait Posts: 1,340	Here is one of my tulwars, the blade changed shape on this one too due to sharpening... Its wootz. Attached Images

25th May 2013, 01:45 AM	#5
archer Member Join Date: Mar 2005 Posts: 373	Very Nice Hi Lotfy, Nice high contrast wootz on the blade. I believe that the punch marks are from Bikaner Armory. Nice catch was it an Arabian from Ardha? Steve

25th May 2013, 09:24 PM	#10
A.alnakkas Member Join Date: Nov 2010 Location: Kuwait Posts: 1,340	Well, here is another tulwar (used to be in my collection, sold to a friend.) the hilt is sindh variety which is longer than the usual Indian ones... The blade is wootz, Assadullah stamp abit worn out. I dont think this is an authentic assadullah though, and the construction of the blade looks Persian at first but the blade has a very short ricasso at the end of the tang.. Attached Images

23rd May 2013, 09:42 AM	#3
A.alnakkas Member Join Date: Nov 2010 Location: Kuwait Posts: 1,340	Hey Archer, Cool group, I like the curvey ones. I noticed (as probably alot did too) that the Indians way of sharpening is abit unforgiving on the blade.. I'd guess that this sword looked alot different when it was made. Give it an etch, I'd guess its potentially wootz.

25th May 2013, 02:01 AM	#6
A.alnakkas Member Join Date: Nov 2010 Location: Kuwait Posts: 1,340	Hey Steve, Thank you. No this one was not in Arabia. When I said that there was Indian swords and blades used by Arabs, I ment real time use rather than ardha dance. This I built on 2 family heirlooms, 2 friends own their great grandfather's swords and both are Indian. One has the all steel shamshir like hilt (will try to find similar photos) and the other had hilt with a tiger head. They were used in a time that the swords were used for combat.. The most interesting part is that they werent rehilted. For the ardha dance, a badawi hilt or Persian style would be far more comfortable.

25th May 2013, 07:25 PM	#7
ariel Member Join Date: Dec 2004 Location: Ann Arbor, MI Posts: 5,503	Tulwars with down-turning handles in my admittedly limited experience always come from the South. This one also has Deccani motive: little balls at the ends of quillons. Northern handles are as a rule straight. My 2 cents worth :-)

25th May 2013, 07:45 PM	#8
Jim McDougall Arms Historian Join Date: Dec 2004 Location: Route 66 Posts: 9,944	Good note on the canted pommel being a southern characteristic, if you consider a ayda katti from the Coorgs on the western side. It seems this is a distinctive feature on these. I would note that the pierced dots in the langet are a feature often seen on Afghan tulwars and from the northern regions, and of course the elongated pommel stem seems aligned with the khanda/firangi group of hilts. There is a profound connection between the Deccan and the Afghan regions along with the obvious context with those routes, so specific regional attribution would be pretty tough.

25th May 2013, 07:54 PM	#9
Flavio Member Join Date: Dec 2004 Location: Italia Posts: 1,243	I think that it's time for a CLASSIC thread on tulwars.....

26th May 2013, 05:58 AM	#11
archer Member Join Date: Mar 2005 Posts: 373	A bit more Hi All, Thanks for your input. Swords have not been My thing in the past but, they are growing on Me. Searches of old posts bring up the Pedang downward pommel on a firangi pedang . I remembered this miniture and others of hunts using swords and though I can't prove it the downward hilt seems perfect for downward strikes from a horse. Ariel mentioned the little balls at the end of the quillions, in this case they seem to be leaf pedals on a "lotus" bud. Flavio has it exactly right we need a " Clasic Tulwar Thread". I can't offer much information but, stand amazed at the different handling characteristics even these three swords bring out. Any ideas on the era this one started out in. Thanks, Steve Attached Images

26th May 2013, 05:05 PM	#13
archer Member Join Date: Mar 2005 Posts: 373	correction Stu you are correct. Points out my need for more sword information and definitely double checking my comments. This sword has more Pedang like characteristics. Steve

30th May 2013, 04:10 PM	#15
archer Member Join Date: Mar 2005 Posts: 373	A bit more Jim, Books are all important to gleaning information on the things we collect. Your great recall and studies were spot on about this sword. your mentioned of this hilt reminding you of Coorg Ayda Katti hilts left me puzzled, at first I could only find examples of the straight ones. Ariels and your comment brought me to these examples the piercing on a Tulwar and the plain disc on another Tulwar. I will look for the book when it comes out. Thanks Attached Images