Moro Kris

kronckew · 2nd January 2008, 07:25 PM

just managed to snag my first real kris on ebay, it's coming from the states in 6-10 days supposedly. more pics after arrival.

Linky

looks a bit like someone stuck it in the scabbard wrong way round

katana · 2nd January 2008, 07:46 PM

Nice One......at a very nice price

Congrats Kronckew .... I like these but haven't seen one at the 'right' price. Would be interested in the experts opinions.

Happy New Year to you all.

Regards David

CharlesS · 2nd January 2008, 07:53 PM

This is a mid 20th century kriss, and a nice example of such.

kronckew · 2nd January 2008, 08:01 PM

hi charles,

i had noted the integral ganya and the grip appears nicely newly wrapped & unworn, so i'd assumed it was not an early one, but it does have a few decades on it by appearances, so i'm glad to get the confirmation.

Battara · 2nd January 2008, 08:20 PM

Not sure if this is what you are talking about but the part where the blade sticks out was broken off and recarved.

Oh yeah, I know Charles loves to hear this - Charles is right, 20th century.

Ferguson · 2nd January 2008, 09:48 PM

Oh, it's a slippery slope you're going down now.

Like other pieces, kris are addictive.

Nice first kris. Looks very much like my first one. Good start!

Steve

kronckew · 23rd January 2008, 02:48 PM

moro kris arrived today, i am quite pleased with it, grip is tight, complete and undamaged except for a couple small pieces of MOP inlay that have been chipped. blade is sharp, had a few black rust spots but nothing active. needed a bit of a clean to get some white metal polish residue off the copper baca-bacas and the gangya nooks and crannies. ran a steel along the edges to clean off a couple small rust spots, the blade 'sings' when its stroked

it has now been oiled with scented mineral oil .

i see that the ebay pics have disappeared, so here are some more.

not shown, the pommel end had two triangular pieces of MOP inlayed either side of a decorative carved transverse groove.

the scabbard is fancy carved on the port side of the scabbard, and not carved at all on the starboard side. the upper corner has in some past trauma had part of the wood knocked off and that has been smoothed and blackened, leaving the upper protrusion of the gangya exposed.

if the scabbard is worn left side to show the carvings, the grip points to the rear and the scabbard must be twisted 90 degrees clockwise in order to grip correctly for a quick draw/strike iado fashion. if the owner was a lefty, and wore it on the right, it would be correct for a european style cross draw.

kronckew · 23rd January 2008, 03:40 PM

some more photos of the gangya, scabbard mouth and grip, pommel end.

i really like this sword...

Rick · 23rd January 2008, 09:40 PM

Wearing the Kris .

kronckew · 23rd January 2008, 10:57 PM

thanks for that, makes a bit more sense of the carry. the only other clear picture i've found was a datu with a fancy ivory hilted kris which looked like it was in the sash with the longer portion of the gangya facing to the rear which is the opposite of the one in your pic & opposite to how mine appears. tribal differences?

Battara · 23rd January 2008, 11:23 PM

I think one is for show wear (datus) and the other is for fighting.

kronckew · 23rd January 2008, 11:39 PM

i found another one with the same placement

good, i'd rather have a battle one than a show one anyway. that datu one above with the fancy ivory looks rather fragile.

Battara · 23rd January 2008, 11:46 PM

Only because he is old and probably survived many battles. It could also be a certain type of kris. I have never seen the cockatua hilted ones looking backward, only forward, and some were battle pieces.

kronckew · 23rd January 2008, 11:59 PM

i meant the hilt looked fragile, not the datu, he looks like he's not someone we'd like to mess with. i'd believe the krag and the ivory hilted .38 were his war souvenirs....

in university my fencing instructor was a little old 70 year old man about 5 ft 2in. tall and maybe 120 pounds. he was also the toughest person i've seen. he was also an ex hungarian army colonel and i gather he was a national sabre champion back in the thirties...you did not mess with him, he was always two steps ahead of you.

Battara · 24th January 2008, 02:21 AM

OH.......boy did I misunderstand....

...

Yes that hilt is a little more fragile since it is ceremonial. His battle kris would not sport such a large ivory head. They always had several kris, at least one for ceremonial purposes and one for combat.

My Filipino grandfather sounds like he would be at home with those folk upon which you spoke. He was a tough "old bird" and an escrimador as well as being a retired cop.

RobT · 24th January 2008, 02:31 AM

Hi All,
Could the difference in carry styles be the result of Japanese influence? The two older photos look to be pre WWII while the newer photo looks like it could be post WWII. If that's true, the iado draw style (along with the necessary sheath carry change) could have been picked up from the Japanese invaders.
Sincerely,
RobT

Battara · 24th January 2008, 02:43 AM

Not a bad idea except that the second old photo has the kris facing "backwards" like the one in the new photo.

kai · 24th January 2008, 08:36 AM

The edge-up carry mode (most are single-edged swords) is also pretty common throughout the Southeast Asian archipelagos.

The vast majority of early Moro pics also shows this orientation which is also confirmed by scabbard decorations or the carry notch on Maguindanao style scabbards.

Regards,
Kai

VANDOO · 24th January 2008, 06:09 PM

AS MOST PICTURES YOU SEE ARE POSED IT MAY BE THEY SOMETIMES CARRY THEIR KRIS AND OTHER WEAPONS DIFFERENT DUE TO THE REGUEST OF THE PHOTOGRAPHER'S VIEW OF HOW TO MAKE A GOOD PHOTO.

THE OLD WARRIOR HAS TWO BANDOLERS AND A KRIS THAT WOULD PROBABLY NOT BE HIS FIRST CHOICE FOR ACTUAL BATTLE EVEN IF IT IS HIS MOST CHERISHED POSSESION AND AN INDICATION OF HIS STATUS AS A WARRIOR AND DATU. WITH SO MUCH EQUIPMENT AND SUCH A LARGE IVORY POMMEL ADJUSTMENTS WOULD HAVE TO BE MADE AND THE PHOTOGRAPHER WOULD LIKE EVERYTHING TO SHOW IN THE PICTURE AND THE OLD DATU WOULD SURELY WANT HIS BEST KRIS IN THE PICTURE. OF COURSE A DATU WITH A RIFLE COULD STAY BACK AND SHOOT THE ENEMY WHILE HIS MEN ENGAGED THE ENEMY AT CLOSE QUARTERS SO HE COULD TAKE HIS DATU KRIS IF HE WANTED.
IN THE OLD DAYS THERE WOULD HAVE BEEN NO FIREARMS JUST A SHIELD, SPEAR AND SWORD OF SOME FORM AND THE WARRIORS WHO HAD NOT YET CAPTURED OR TRADED FOR A FIREARM WERE PROBABLY STILL ARMED IN THE OLD WAY EVEN AGAINST FIREARMS. NEAT PICTURES

AND CONGRADULATIONS ON YOUR FIRST KRIS.

RobT · 25th January 2008, 01:44 AM

Hi Battara,
Well, that certainly shoots that theory all to heck. I made an assumption based on an incorrect interpretation of the replies and you know what happens when you assume instead of observing and considering carefully.
Sincerely,
RobT

Battara · 25th January 2008, 08:42 PM

That's ok - I have often made an asset of my self many, many times.

Actually Robert it was not a bad idea.....

kronckew · 27th January 2008, 09:43 AM

one last question i have needs ellucidation.

when reading frederico's excellent info linked to on the reference site, i noted that during construction the kris blade would be descaled and shaped using a draw knife, with more recent ones being filed.

how does one tell?

my kris has a series of fine straight parallel grooves running longitudinally along the blade with no sign of what i would consider filing marks perpendicular to the edge, in fact i do not see any sign that the edge was ground to sharpen it other than a very fine polished edge bevel of maybe a millimeter & the lines are constant and parallel to the longitudinal axis right to the edge (there is some variation near the luks). i see no signs that a stone or grinder has ever been anywhere near this blade, no random marks as i'd expect from stoning or sanding/grinding. it certainly looks to my mechanical engineers eyes like it was scraped with a tool lengthwise rather than filed.

the lines over most of the blade are very fine, but near the hilt are a bit more distinct. across the gangya itself they ARE perpendicular & across the blade from the ends of the baca-baca to the hilt. is this filed or drawn? what dates were the transition to filing or is that too broad?

Battara · 27th January 2008, 09:52 PM

Would you please post pictures - this would help tremendously.

kronckew · 27th January 2008, 10:18 PM

OK, you can see the striations in this shot

you can kind of see them in the earlier photos, but i've set the lighting on this one to exaggerate them a bit
.

kai · 28th January 2008, 09:53 AM

Hm, I'm not sure what caused these but IMHO it screams power tools (seems like this was done after the hilt and clamps were already fitted - maybe just a really bad cleaning/polishing job?). It certainly isn't something I've ever seen with an antique Moro kris.

Your blade has been grinded into shape (luk and gangya features formed by stock removal). In the traditional approach a blade would be forged into shape and would only need minor work to remove scale and to smooth the surface. Detailed work at the base of the blade would be done by specialized tools (including small files, I suppose) and then the blade would be ready for the final polishing steps.

Regards,
Kai

Battara · 28th January 2008, 10:56 PM

I'm with Kai on this one. You see more of this on mid - present made pieces.

2nd January 2008, 07:25 PM	#1
kronckew Member Join Date: Mar 2006 Location: Room 101, Glos. UK Posts: 4,184	Moro Kris just managed to snag my first real kris on ebay, it's coming from the states in 6-10 days supposedly. more pics after arrival. Linky looks a bit like someone stuck it in the scabbard wrong way round

23rd January 2008, 02:48 PM	#7
kronckew Member Join Date: Mar 2006 Location: Room 101, Glos. UK Posts: 4,184	moro kris arrived today, i am quite pleased with it, grip is tight, complete and undamaged except for a couple small pieces of MOP inlay that have been chipped. blade is sharp, had a few black rust spots but nothing active. needed a bit of a clean to get some white metal polish residue off the copper baca-bacas and the gangya nooks and crannies. ran a steel along the edges to clean off a couple small rust spots, the blade 'sings' when its stroked it has now been oiled with scented mineral oil . i see that the ebay pics have disappeared, so here are some more. not shown, the pommel end had two triangular pieces of MOP inlayed either side of a decorative carved transverse groove. the scabbard is fancy carved on the port side of the scabbard, and not carved at all on the starboard side. the upper corner has in some past trauma had part of the wood knocked off and that has been smoothed and blackened, leaving the upper protrusion of the gangya exposed. if the scabbard is worn left side to show the carvings, the grip points to the rear and the scabbard must be twisted 90 degrees clockwise in order to grip correctly for a quick draw/strike iado fashion. if the owner was a lefty, and wore it on the right, it would be correct for a european style cross draw. Last edited by kronckew; 23rd January 2008 at 03:50 PM.

23rd January 2008, 09:40 PM	#9
Rick Vikingsword Staff Join Date: Nov 2004 Posts: 6,293	A Tausug Wearing the Kris . Attached Images

24th January 2008, 02:31 AM	#16
RobT Member Join Date: Mar 2005 Posts: 493	Pre & Post WWII draw? Hi All, Could the difference in carry styles be the result of Japanese influence? The two older photos look to be pre WWII while the newer photo looks like it could be post WWII. If that's true, the iado draw style (along with the necessary sheath carry change) could have been picked up from the Japanese invaders. Sincerely, RobT

25th January 2008, 01:44 AM	#20
RobT Member Join Date: Mar 2005 Posts: 493	down in flames Hi Battara, Well, that certainly shoots that theory all to heck. I made an assumption based on an incorrect interpretation of the replies and you know what happens when you assume instead of observing and considering carefully. Sincerely, RobT

2nd January 2008, 07:46 PM	#2
katana Member Join Date: Jan 2006 Location: Kent Posts: 2,653	Nice One......at a very nice price Congrats Kronckew .... I like these but haven't seen one at the 'right' price. Would be interested in the experts opinions. Happy New Year to you all. Regards David

2nd January 2008, 07:53 PM	#3
CharlesS Member Join Date: Dec 2004 Location: Greenville, NC Posts: 1,857	This is a mid 20th century kriss, and a nice example of such.

2nd January 2008, 08:01 PM	#4
kronckew Member Join Date: Mar 2006 Location: Room 101, Glos. UK Posts: 4,184	hi charles, i had noted the integral ganya and the grip appears nicely newly wrapped & unworn, so i'd assumed it was not an early one, but it does have a few decades on it by appearances, so i'm glad to get the confirmation.

2nd January 2008, 08:20 PM	#5
Battara EAAF Staff Join Date: Dec 2004 Location: Louisville, KY Posts: 7,226	Not sure if this is what you are talking about but the part where the blade sticks out was broken off and recarved. Oh yeah, I know Charles loves to hear this - Charles is right, 20th century.

2nd January 2008, 09:48 PM	#6
Ferguson Member Join Date: Dec 2004 Location: Kernersville, NC, USA Posts: 793	Oh, it's a slippery slope you're going down now. Like other pieces, kris are addictive. Nice first kris. Looks very much like my first one. Good start! Steve

23rd January 2008, 03:40 PM	#8
kronckew Member Join Date: Mar 2006 Location: Room 101, Glos. UK Posts: 4,184	some more photos of the gangya, scabbard mouth and grip, pommel end. i really like this sword...

23rd January 2008, 10:57 PM	#10
kronckew Member Join Date: Mar 2006 Location: Room 101, Glos. UK Posts: 4,184	thanks for that, makes a bit more sense of the carry. the only other clear picture i've found was a datu with a fancy ivory hilted kris which looked like it was in the sash with the longer portion of the gangya facing to the rear which is the opposite of the one in your pic & opposite to how mine appears. tribal differences?

23rd January 2008, 11:23 PM	#11
Battara EAAF Staff Join Date: Dec 2004 Location: Louisville, KY Posts: 7,226	I think one is for show wear (datus) and the other is for fighting.

23rd January 2008, 11:39 PM	#12
kronckew Member Join Date: Mar 2006 Location: Room 101, Glos. UK Posts: 4,184	i found another one with the same placement good, i'd rather have a battle one than a show one anyway. that datu one above with the fancy ivory looks rather fragile.

23rd January 2008, 11:46 PM	#13
Battara EAAF Staff Join Date: Dec 2004 Location: Louisville, KY Posts: 7,226	Only because he is old and probably survived many battles. It could also be a certain type of kris. I have never seen the cockatua hilted ones looking backward, only forward, and some were battle pieces.

23rd January 2008, 11:59 PM	#14
kronckew Member Join Date: Mar 2006 Location: Room 101, Glos. UK Posts: 4,184	i meant the hilt looked fragile, not the datu, he looks like he's not someone we'd like to mess with. i'd believe the krag and the ivory hilted .38 were his war souvenirs.... in university my fencing instructor was a little old 70 year old man about 5 ft 2in. tall and maybe 120 pounds. he was also the toughest person i've seen. he was also an ex hungarian army colonel and i gather he was a national sabre champion back in the thirties...you did not mess with him, he was always two steps ahead of you.

24th January 2008, 02:21 AM	#15
Battara EAAF Staff Join Date: Dec 2004 Location: Louisville, KY Posts: 7,226	OH.......boy did I misunderstand.... ... Yes that hilt is a little more fragile since it is ceremonial. His battle kris would not sport such a large ivory head. They always had several kris, at least one for ceremonial purposes and one for combat. My Filipino grandfather sounds like he would be at home with those folk upon which you spoke. He was a tough "old bird" and an escrimador as well as being a retired cop.

24th January 2008, 02:43 AM	#17
Battara EAAF Staff Join Date: Dec 2004 Location: Louisville, KY Posts: 7,226	Not a bad idea except that the second old photo has the kris facing "backwards" like the one in the new photo.

24th January 2008, 08:36 AM	#18
kai Member Join Date: Apr 2005 Posts: 3,254	The edge-up carry mode (most are single-edged swords) is also pretty common throughout the Southeast Asian archipelagos. The vast majority of early Moro pics also shows this orientation which is also confirmed by scabbard decorations or the carry notch on Maguindanao style scabbards. Regards, Kai

24th January 2008, 06:09 PM	#19
VANDOO (deceased) Join Date: Dec 2004 Location: OKLAHOMA, USA Posts: 3,138	AS MOST PICTURES YOU SEE ARE POSED IT MAY BE THEY SOMETIMES CARRY THEIR KRIS AND OTHER WEAPONS DIFFERENT DUE TO THE REGUEST OF THE PHOTOGRAPHER'S VIEW OF HOW TO MAKE A GOOD PHOTO. THE OLD WARRIOR HAS TWO BANDOLERS AND A KRIS THAT WOULD PROBABLY NOT BE HIS FIRST CHOICE FOR ACTUAL BATTLE EVEN IF IT IS HIS MOST CHERISHED POSSESION AND AN INDICATION OF HIS STATUS AS A WARRIOR AND DATU. WITH SO MUCH EQUIPMENT AND SUCH A LARGE IVORY POMMEL ADJUSTMENTS WOULD HAVE TO BE MADE AND THE PHOTOGRAPHER WOULD LIKE EVERYTHING TO SHOW IN THE PICTURE AND THE OLD DATU WOULD SURELY WANT HIS BEST KRIS IN THE PICTURE. OF COURSE A DATU WITH A RIFLE COULD STAY BACK AND SHOOT THE ENEMY WHILE HIS MEN ENGAGED THE ENEMY AT CLOSE QUARTERS SO HE COULD TAKE HIS DATU KRIS IF HE WANTED. IN THE OLD DAYS THERE WOULD HAVE BEEN NO FIREARMS JUST A SHIELD, SPEAR AND SWORD OF SOME FORM AND THE WARRIORS WHO HAD NOT YET CAPTURED OR TRADED FOR A FIREARM WERE PROBABLY STILL ARMED IN THE OLD WAY EVEN AGAINST FIREARMS. NEAT PICTURES AND CONGRADULATIONS ON YOUR FIRST KRIS.

25th January 2008, 08:42 PM	#21
Battara EAAF Staff Join Date: Dec 2004 Location: Louisville, KY Posts: 7,226	That's ok - I have often made an asset of my self many, many times. Actually Robert it was not a bad idea.....

27th January 2008, 09:43 AM	#22
kronckew Member Join Date: Mar 2006 Location: Room 101, Glos. UK Posts: 4,184	one last question i have needs ellucidation. when reading frederico's excellent info linked to on the reference site, i noted that during construction the kris blade would be descaled and shaped using a draw knife, with more recent ones being filed. how does one tell? my kris has a series of fine straight parallel grooves running longitudinally along the blade with no sign of what i would consider filing marks perpendicular to the edge, in fact i do not see any sign that the edge was ground to sharpen it other than a very fine polished edge bevel of maybe a millimeter & the lines are constant and parallel to the longitudinal axis right to the edge (there is some variation near the luks). i see no signs that a stone or grinder has ever been anywhere near this blade, no random marks as i'd expect from stoning or sanding/grinding. it certainly looks to my mechanical engineers eyes like it was scraped with a tool lengthwise rather than filed. the lines over most of the blade are very fine, but near the hilt are a bit more distinct. across the gangya itself they ARE perpendicular & across the blade from the ends of the baca-baca to the hilt. is this filed or drawn? what dates were the transition to filing or is that too broad?

27th January 2008, 09:52 PM	#23
Battara EAAF Staff Join Date: Dec 2004 Location: Louisville, KY Posts: 7,226	Would you please post pictures - this would help tremendously.

27th January 2008, 10:18 PM	#24
kronckew Member Join Date: Mar 2006 Location: Room 101, Glos. UK Posts: 4,184	OK, you can see the striations in this shot you can kind of see them in the earlier photos, but i've set the lighting on this one to exaggerate them a bit .

28th January 2008, 09:53 AM	#25
kai Member Join Date: Apr 2005 Posts: 3,254	Hm, I'm not sure what caused these but IMHO it screams power tools (seems like this was done after the hilt and clamps were already fitted - maybe just a really bad cleaning/polishing job?). It certainly isn't something I've ever seen with an antique Moro kris. Your blade has been grinded into shape (luk and gangya features formed by stock removal). In the traditional approach a blade would be forged into shape and would only need minor work to remove scale and to smooth the surface. Detailed work at the base of the blade would be done by specialized tools (including small files, I suppose) and then the blade would be ready for the final polishing steps. Regards, Kai

28th January 2008, 10:56 PM	#26
Battara EAAF Staff Join Date: Dec 2004 Location: Louisville, KY Posts: 7,226	I'm with Kai on this one. You see more of this on mid - present made pieces.