Ethnographic Arms & Armour
 

Go Back   Ethnographic Arms & Armour > Discussion Forums > Keris Warung Kopi
FAQ Calendar Today's Posts Search

Reply
 
Thread Tools Search this Thread Display Modes
Old 29th April 2009, 05:10 AM   #1
ferrylaki
Member
 
Join Date: Aug 2006
Posts: 285
Default Pamorless keris (keleng)

recently got this pamorless keris.
I always wondering about kelengan keris, and finally I got one.
I've been trying to find out whether it has a hiddden pamor. the result comes to zero, but I found small area in the middle of the blade surface showing tiny little materials ( like a very smooth sands). what is it? .
the new warangan work seem just fine.
Attached Images
   
ferrylaki is offline   Reply With Quote
Old 29th April 2009, 10:47 PM   #2
Rick
Vikingsword Staff
 
Rick's Avatar
 
Join Date: Nov 2004
Posts: 6,291
Smile

Could it be old iron showing edge hardening Ferry ?
Rick is offline   Reply With Quote
Old 30th April 2009, 01:31 AM   #3
ferrylaki
Member
 
Join Date: Aug 2006
Posts: 285
Default

Quote:
Originally Posted by Rick
Could it be old iron showing edge hardening Ferry ?
I have no idea.
some people said, it was caused by the impurities of the iron.
ferrylaki is offline   Reply With Quote
Old 30th April 2009, 11:40 AM   #4
BluErf
Member
 
BluErf's Avatar
 
Join Date: Dec 2004
Location: Singapore
Posts: 1,180
Default

The 'smooth sand' is prob what is known as 'pamor miang' in peninsular keris context. It's not really a pamor, but some sort of crystallization. Experience is that metals exhibiting "pamor miang" are not very strong/hard, and is usually the non-cutting edge metal. Sometimes we see this in Sumatran kerises without pamor as well. Not sure how it is formed though.
BluErf is offline   Reply With Quote
Old 1st May 2009, 04:52 AM   #5
ferrylaki
Member
 
Join Date: Aug 2006
Posts: 285
Default

Quote:
Originally Posted by BluErf
The 'smooth sand' is prob what is known as 'pamor miang' in peninsular keris context. It's not really a pamor, but some sort of crystallization. Experience is that metals exhibiting "pamor miang" are not very strong/hard, and is usually the non-cutting edge metal. Sometimes we see this in Sumatran kerises without pamor as well. Not sure how it is formed though.

Thank You BluErf,
the 'smooth sand' do not bother me any way.
I'm quite pleased with the warangan work.
the black colour seem strong and deep. specially after I put some keris oil on it. I took tho pisture immediately after the oiling, and it result nicely.

here are some pictures before the warangan process. I hope you all enjoying the picture as I do.

the third picture shows some lines as a result of the forging process.
really love those lines. I've been looking for keris with lines.
Attached Images
   
ferrylaki is offline   Reply With Quote
Old 1st May 2009, 05:23 AM   #6
G. McCormack
Member
 
G. McCormack's Avatar
 
Join Date: Jul 2005
Location: Tallahassee, FL
Posts: 131
Default

the 'sand' like appearance you see is just the crystal structure of the steel/iron revealed by the etch. Probably a forest of pearlite crystals. Nice blade.
G. McCormack is offline   Reply With Quote
Old 1st May 2009, 08:52 AM   #7
ferrylaki
Member
 
Join Date: Aug 2006
Posts: 285
Default

Quote:
Originally Posted by G. McCormack
the 'sand' like appearance you see is just the crystal structure of the steel/iron revealed by the etch. Probably a forest of pearlite crystals. Nice blade.
thank you for the information.
ferrylaki is offline   Reply With Quote
Old 3rd May 2009, 02:03 PM   #8
Sajen
Member
 
Sajen's Avatar
 
Join Date: Aug 2007
Location: Germany, Dortmund
Posts: 8,769
Default

Nice keleng blade and good pictures.
sajen
Sajen is offline   Reply With Quote
Old 3rd May 2009, 03:03 PM   #9
kulbuntet
Member
 
kulbuntet's Avatar
 
Join Date: Oct 2008
Location: Amsterdam, Netherlands
Posts: 159
Default

Annyone had a thought about that the waragnan bath maybe was to strong.. I think the blade has got pamor, but the wash was to strong.
kulbuntet is offline   Reply With Quote
Old 4th May 2009, 02:37 AM   #10
ferrylaki
Member
 
Join Date: Aug 2006
Posts: 285
Default

Quote:
Originally Posted by kulbuntet
Annyone had a thought about that the waragnan bath maybe was to strong.. I think the blade has got pamor, but the wash was to strong.
I understand your thought about the ' too strong warangan' . at the first time I also have the same feeling about this keris. It must be a pamor keris.
I find it so difficult to find a kelengan keris. thats why this keris amuse me so much, because it trully is a kelengan keris. I've been asking for some opinion regarding this keris. all of them says it is a kelengan keris.

the warangan job it self done in a very good manner, by a goos friend of mine. he is a a very skillfull person with warangan and other keris related activities.
lets us continue this discussion to its tangguh. I have a thought this keris has tangguh of: early Hamengku Buwono. looking at its gonjo.
any body has another idea?
ferrylaki is offline   Reply With Quote
Old 6th May 2009, 12:27 AM   #11
A. G. Maisey
Member
 
Join Date: May 2006
Posts: 6,889
Default

Ferry, I know you to be quite knowledgeable in the field of keris, you have this keris in your hand, and your opinion is that it is early HB.

However, I would ask you to consider this:-

is it legitimate to give a kraton based tangguh to a keris that is obviously of far less than kraton quality?

is it possible to give a supportable opinion in respect of tangguh when we are dealing with a keris that lacks many of the indicators that we would normally use to establish an opinion?

is it possible that we are looking at a keris that might be able to be categorised as Kajoran, or perhaps Godean --- or maybe, just maybe, Palembang?

I myself am not prepared to offer an opinion on this keris, simply because it is far too difficult to form an opinion from just a photo. I cannot accurately appraise the pawakan, I have no idea at all of the tanting, I cannot feel the texture, I cannot see if the ganja is sebit ron or nguceng mati, I do not know the form of the sirah cecak---its just too hard from a photo, especially for a blade like this.

What I think I can see is what appears to be a fairly substantial blade with a sharply defined ada-ada running full length of the blade, no kruwingan, a square blumbangan, a ganja with a mid line curve, but a small and harsh tungkakan. This is sufficient to point my mind along a certain road, but at the end of that road there are a number of gateways. I do not know from the photos which one to choose.
A. G. Maisey is offline   Reply With Quote
Old 6th May 2009, 02:23 AM   #12
ferrylaki
Member
 
Join Date: Aug 2006
Posts: 285
Default

Quote:
Originally Posted by A. G. Maisey
Ferry, I know you to be quite knowledgeable in the field of keris, you have this keris in your hand, and your opinion is that it is early HB.

However, I would ask you to consider this:-

is it legitimate to give a kraton based tangguh to a keris that is obviously of far less than kraton quality?

is it possible to give a supportable opinion in respect of tangguh when we are dealing with a keris that lacks many of the indicators that we would normally use to establish an opinion?

is it possible that we are looking at a keris that might be able to be categorised as Kajoran, or perhaps Godean --- or maybe, just maybe, Palembang?

I myself am not prepared to offer an opinion on this keris, simply because it is far too difficult to form an opinion from just a photo. I cannot accurately appraise the pawakan, I have no idea at all of the tanting, I cannot feel the texture, I cannot see if the ganja is sebit ron or nguceng mati, I do not know the form of the sirah cecak---its just too hard from a photo, especially for a blade like this.

What I think I can see is what appears to be a fairly substantial blade with a sharply defined ada-ada running full length of the blade, no kruwingan, a square blumbangan, a ganja with a mid line curve, but a small and harsh tungkakan. This is sufficient to point my mind along a certain road, but at the end of that road there are a number of gateways. I do not know from the photos which one to choose.
Hai Alan, I finally got your attention.
I define the tangguh to be early HB since its original warangka is a Jogjanese brangah. sorry I didnt include the warangka ini the picture.
I also understand its very hard to judge tangguh using photograph.
we must feel the surface, the tantingan, etc.
I try my best to provide these good pictures for us to discuss.
I rarely meet palembang keris. the last palembang keris I met is much much thicker with sharply defined ada-ada which is also running full lenght of the blade. using a kinatah gonjo, very beautiful keris ( a saw the keris 2 weeks ago) .

I hope this discussion would continue a bit longer. I really apreciate any opinion about this keris. I try my best to provide a decent keris to be discussed.
Hope that my Thread would become a usefull discussion material for all of us.
Thank you.

Ferrylaki
ferrylaki is offline   Reply With Quote
Old 6th May 2009, 03:23 AM   #13
David
Keris forum moderator
 
David's Avatar
 
Join Date: Aug 2006
Location: Nova Scotia
Posts: 7,120
Default

Can someone please define tantingan?
David is offline   Reply With Quote
Old 6th May 2009, 04:14 AM   #14
A. G. Maisey
Member
 
Join Date: May 2006
Posts: 6,889
Default

Tantingan is the weight estimated by holding in your hand---yes, its as specific as that, you must hold it. Can apply to anything, not just keris.

Actually Ferry, you got my attention on day one, but I was hoping somebody else would jump into the pond before I did.

I tend to take no notice at all of the dress a blade comes in, often, that will only confuse you. Have you been to the musium in the Mangkunegaran, Ferry? Seen the keris worn by Balinese mercenaries? Over the years I've seen Bugis blades in old Central Jawa dress, Bali blades in old Central Jawa dress, lots of old Madura blades in old Central Jawa dress, and I've seen old Javanese blades in old Bali dress. I just don't take a lot of notice of the dress if I'm trying to decide what the classification of a blade might be.

Yeah, some of the good Palembang are as good as anything we find from Central Jawa. I've got a real nice Palembang with heavy, perfect kinatah, fine ivory hilt and swasa pendok. I bought it in London, of all places.
A. G. Maisey is offline   Reply With Quote
Old 6th May 2009, 04:21 AM   #15
David
Keris forum moderator
 
David's Avatar
 
Join Date: Aug 2006
Location: Nova Scotia
Posts: 7,120
Default

Thanks Alan.
David is offline   Reply With Quote
Old 6th May 2009, 04:23 AM   #16
ferrylaki
Member
 
Join Date: Aug 2006
Posts: 285
Default

Quote:
Originally Posted by A. G. Maisey
Tantingan is the weight estimated by holding in your hand---yes, its as specific as that, you must hold it. Can apply to anything, not just keris.

Actually Ferry, you got my attention on day one, but I was hoping somebody else would jump into the pond before I did.

I tend to take no notice at all of the dress a blade comes in, often, that will only confuse you. Have you been to the musium in the Mangkunegaran, Ferry? Seen the keris worn by Balinese mercenaries? Over the years I've seen Bugis blades in old Central Jawa dress, Bali blades in old Central Jawa dress, lots of old Madura blades in old Central Jawa dress, and I've seen old Javanese blades in old Bali dress. I just don't take a lot of notice of the dress if I'm trying to decide what the classification of a blade might be.

Yeah, some of the good Palembang are as good as anything we find from Central Jawa. I've got a real nice Palembang with heavy, perfect kinatah, fine ivory hilt and swasa pendok. I bought it in London, of all places.
I haven't visit the Mangkunegaran museum yet, maybe next time.
The idea of opening this new thread is finding another opinion regarding my new keris.During my second year studying tke keris, I found it so hard to understand, learning about the dhapur, the material, specially the tangguh.
Alan, do you really have a suspicion this is a palembang keris? based on the sirah cecak shape and the gonjo?
ferrylaki is offline   Reply With Quote
Old 6th May 2009, 04:36 AM   #17
A. G. Maisey
Member
 
Join Date: May 2006
Posts: 6,889
Default

I'm sorry Ferry, but I just cannot say with any degree of certainty.

I just can't do this sort of thing from photos ---unless we're talking Segaluh or high class Surakarta, or something else that is easy to tag. I've seen Palembang blades that look more or less like this one, but because they haven't been regularly cleaned, they have always looked to have different material to this one. All I'm saying is that it might---I emphasise might--- be a possibility.

The Mn. is worth a visit. No pics inside, but you can sketch. Some nice old gold in the collection.
A. G. Maisey is offline   Reply With Quote
Old 6th May 2009, 04:57 AM   #18
ferrylaki
Member
 
Join Date: Aug 2006
Posts: 285
Default

Quote:
Originally Posted by A. G. Maisey
I'm sorry Ferry, but I just cannot say with any degree of certainty.

I just can't do this sort of thing from photos ---unless we're talking Segaluh or high class Surakarta, or something else that is easy to tag. I've seen Palembang blades that look more or less like this one, but because they haven't been regularly cleaned, they have always looked to have different material to this one. All I'm saying is that it might---I emphasise might--- be a possibility.

The Mn. is worth a visit. No pics inside, but you can sketch. Some nice old gold in the collection.
Thanks Alan, my first conclusion regarding this keris is ' it is a javanese' keris. I've made some discussion on this keris, and all of the opinion says this is a javanese keris. I always looking forward for your opinion, that's why I immediately brought this photos to this forum.
you're the first person to say that it might be a palembang keris. as you mention before 'they have always looked to have different material to this one' based on the keris material it self. most of my friends would tend to say this keris have a common material used in javanese kerises. the buntut urang is 2mm wide. about the nyebit rontal ganja, I would say this one do not have nyebit ron ganja. there is a trace of ri pandan indicate it has jalak tilam sari dhapur. a common dhapur in javanese keris.
ferrylaki is offline   Reply With Quote
Old 6th May 2009, 05:31 AM   #19
A. G. Maisey
Member
 
Join Date: May 2006
Posts: 6,889
Default

Yeah, might have been a tilam sari --- or it might not. I mentioned Palembang because it does have certain features that are similar to some Palembang I have seen, but Ferry, I don't think my qualification of my remarks is getting through:- I consider Palembang to be a very, very, very outside possibility, with really no hope of supporting this opinion, for the simple reason that this keris has been heavily cleaned over a long period of time, whereas the Palembang blades I have seen that are similar still had a bench finish on them. The feel and appearance of material changes over time, thus to compare pristine finish with heavily cleaned finish is not possible.

I 've said it previously, and I will say it again:- I cannot give an opinion on this keris from photographs; all I can do is agree to the visible characteristics and float a few possibilities.

I am not giving an opinion: I am suggesting that perhaps you might like to consider some possibilities other than HB.

You are the man who has it in his hand, it must be your decision.
A. G. Maisey is offline   Reply With Quote
Old 6th May 2009, 05:52 AM   #20
ferrylaki
Member
 
Join Date: Aug 2006
Posts: 285
Default

thanks again Alan.
ferrylaki is offline   Reply With Quote
Old 7th May 2009, 03:50 AM   #21
ferrylaki
Member
 
Join Date: Aug 2006
Posts: 285
Default

I found a comparison palembang keris for our further discussion.
how do you think?
Attached Images
 
ferrylaki is offline   Reply With Quote
Old 7th May 2009, 04:43 AM   #22
A. G. Maisey
Member
 
Join Date: May 2006
Posts: 6,889
Default

Looks like a nice keris.

Last edited by A. G. Maisey; 7th May 2009 at 06:43 AM. Reason: irrelevant
A. G. Maisey is offline   Reply With Quote
Old 9th May 2009, 03:56 AM   #23
BluErf
Member
 
BluErf's Avatar
 
Join Date: Dec 2004
Location: Singapore
Posts: 1,180
Default

The anak alang above is very nice, but is rather unusual in the context of Palembang. Anak alang forms are more commonly found in Central Sumatra, worn by the Minangs, but even then, the anak alangs are of slightly different form and generally not as refined as this. Note that the hilt is new ivory, and the bit of sheath I can see on the top left corner seems to show a Palembang sampir's although it looks also a bit stiff. The hilt form does not match that sampir form. This in turn could suggest that this keris is a put together, and I do not rule out recent 'enhancements' to the keris. In which case, the use of this keris for comparison is not 'safe', in my opinion.
BluErf is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 09:03 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Posts are regarded as being copyrighted by their authors and the act of posting material is deemed to be a granting of an irrevocable nonexclusive license for display here.