11th March 2023, 07:17 AM | #1 |
Member
Join Date: Sep 2021
Location: New Zealand
Posts: 261
|
Pinch of Snuff Basket-hilt
This week I received a new sword for my collection, a basket-hilted broadsword with a brass ‘pinch of snuff’ hilt. The hilt derives its name from the 18th Century painting that shows a highlander taking a pinch of snuff. On his side is a basket hilt with this style of basket.
Based on this, it is believed that the style relates to the early to mid 18th Century. My sword is a composite with an older 17th cent. London made blade. The blade is also shorter and lighter than one normally would expect and the edge shows signs of having repairs to the edge. The grip is a later repair as is the pommel (as informed by the dealer I purchased it from). The blade is marked: Thomas Hvmffreies Londin Fecit Anno 1668 Has anyone else encountered a blade by Thomas? |
12th March 2023, 07:37 AM | #2 |
EAAF Staff
Join Date: Dec 2004
Location: Louisville, KY
Posts: 7,217
|
What a great example. Congratulations! I love this.
I agree that the blade does look older than the bronze basket. |
12th March 2023, 07:00 PM | #3 |
Arms Historian
Join Date: Dec 2004
Location: Route 66
Posts: 9,937
|
This is truly a wonderful acquisition! and these hilts, as noted known colloquially by collectors as the 'pinch of snuff' style are not often seen, though well known. The elaborate styling and character is of the Stirling form, and interesting in brass. It seems that brass in Scottish hilts did exist c.1720s however it was more favored for officers dress swords.
While in Scottish form, this would be more a Hanoverian example, and the wire wrapped rayskin grip, and form altogether remind me of a British dragoon officers sword with branched guard I had many years ago, also in brass contrary to other examples of its form in iron. The phrase 'pinch of snuff' of course refers to the c.1760 painting by William Delacour of an officer of the 78th or Fraser's Regiment of Highlanders, in which a sword with similar hilt is seen. While the history of this regiment is complex, as noted by Anthony Darling in "A Relic of the First Raising (1757-1763) of Frasers Highlanders" ('Arms Collecting' Vol.24, #4, Nov. 1986), the painting by Delacour was intended as a homage to Malcom MacPherson of the 78th Regt. This form of hilt was deemed a 'military' pattern, though it was by no means regulation, though clearly favored by officers of these times (during the Seven Years War). Other excerpts attached are from "Blades of Glory: Swords of the Scottish Infantry 1756-1900", Stephen Wood , in 'Book of Edged Weapons' 1997. "Scottish Swords and Dirks", John Wallace, 1970. #44. It seems likely this is a heirloom blade, as often were mounted in current hilts by officers in Scottish regiments. This blade is remarkable, and in unusual fuller pattern in which the name, lettering and manner are quite consistent with 17th c. English blades. The Latin type manner in wording is like that seen on Hounslow blades of the 1630s, with the use of ANNO in following apparently with the Solingen convention of this date associated word used by Iohannes Stam for example on blade ANNO 1612. However other examples of ANNO are found with the magic numeric palindrome 1414, obviously not a date. I have not found a THOMAS HUMFFRIES in any of my references, but the spelling is consistent with other names and widely variant spellings in this English convention of placing names on blades. It seems possible that he might have worked in the Oxford manufactory in London where many of the Hounslow workers are alleged to have gone after Cromwells take over. Perhaps Southwick (which I do not have handy at the moment) might reveal this name. Last edited by Jim McDougall; 12th March 2023 at 08:57 PM. |
12th March 2023, 07:48 PM | #4 |
Member
Join Date: Oct 2007
Posts: 1,596
|
Hi,
Here is one in a similar vein which was sold last year. It has an interesting plaque on the blade which I would suggest was accurately described thus-: "Note: The applied 19th century gold plaque reads ‘The claymore was once the property of the Unfortunate Prince Charles and worn by him at the Battle of Culloden, after his defeat it fell into the hands of CAPt DRUMMOND of his suite who gave it to the late ROBt GRAHAM of Gartmore Esq’. Although the information on the plaque surely cannot be correct, this sword is neither a claymore nor a pattern known at the time of the ‘45 it shows the great historical value placed on relics of this period by the early 19th century." Regards, Norman. Last edited by Norman McCormick; 12th March 2023 at 07:59 PM. |
12th March 2023, 08:01 PM | #5 | |
Arms Historian
Join Date: Dec 2004
Location: Route 66
Posts: 9,937
|
Quote:
Still the sword is an interesting item in its own right as an example of this type of sword which has is known but hardly seen often. The term 'claymore' is another of the ever distorted terms in the realm of collectors jargon. It actually of course means 'great sword' and refers to the large two handers, but later became colloquially aligned with the well known basket hilt, which were not of course called that by the Scots. Last edited by Jim McDougall; 12th March 2023 at 08:53 PM. |
|
12th March 2023, 08:48 PM | #6 |
Arms Historian
Join Date: Dec 2004
Location: Route 66
Posts: 9,937
|
British dragoon officer c.1765
I found the image I was looking for of the British dragoon officers sword with branched guard that I once had. While these are typically of iron as seen here and other references, mine was with brass hilt. The wire and rayskin grip was similar.
It seems that as officers swords of course were privately commissioned there was a certain penchant for gilt hilts, which often were done over brass. It would seem that here we have examples of officers swords on this period, 1760s, which were done in brass perhaps for such application. The image is from "the British Basket Hilted Cavalry Sword" by A.D.Darling, 'The Canadian Journal of Arms Collecting" Vo.7, #3, 1974 |
12th March 2023, 10:28 PM | #7 |
Member
Join Date: Sep 2021
Location: New Zealand
Posts: 261
|
Brass hilts
Thank you for the feedback Jim, the basket does have a couple of unique features that does make it stand out. Not least that it's brass when the majority are steel (At least until the 1798 Pattern).
Another is that the typical loops found at the front of the guard are missing and there is no sign that they've been broken off. However, I have seen another example of the exact same hilt style on a broadsword blade: Last edited by Radboud; 12th March 2023 at 10:43 PM. |
13th March 2023, 07:10 PM | #8 | |
Arms Historian
Join Date: Dec 2004
Location: Route 66
Posts: 9,937
|
Quote:
I fpund this reference in "Arms and Armour: The Northern Branch Arms and Armour Society", Manchester, 1968, plate 6. In the text it mentions Sir Walter Scott, Rob Roy, and the associated allusions thereby,and that it is 'reputed' that two swords in Culloden House at the turn of the century (similar hilts) were 'assumed' to have been picked up off the field after the 45. There is no mention of the 'pinch of snuff' phrase of course, and it is worthy of note that only 193 swords were found there after the battle. Prince Charlie was of course not a combatant, and was heavily guarded as he made his escape. Of the 193 swords picked up, the rancor toward them is best described by the fact that a large number of these were dismantled and placed in the abhorrent 'twickenham fence' where they were disgraced being welded into this horrible work. It is interesting here to see the probable root of this hubris laden description on the example shown from auction. While the attached plate is like most of these cases, entirely apocryphal, the 'romantic' in many of us wish it to be true. Who knows, maybe the hilt form existed before Delacour depicted it c. 1760. Last edited by Jim McDougall; 13th March 2023 at 07:29 PM. |
|
13th March 2023, 07:22 PM | #9 | |
Arms Historian
Join Date: Dec 2004
Location: Route 66
Posts: 9,937
|
Quote:
In "Small Swords and Military Swords" by the late A.V.B.Norman (1967). Example #6, a spadroon, 1763-64 with silver hilt. Note the character of the hilt, pommel and scrolled quillons. Then an example I have of a British dragoon officers sword c.1775 stamped READ in guard (Read was a Dublin outfitter), and a similar example shown in Southwick...both with brass hilts, wire wrapped ivory grips, note pommels gadrooned. These illustrate the ornate character of the period where the fashion of the small sword (and spadroon) lent to other hilts as well. |
|
13th March 2023, 09:58 PM | #10 |
Member
Join Date: Sep 2017
Location: Tyneside. North-East England
Posts: 530
|
Hounslow and Londin
I think it has been agreed-upon that not all four digit numbers refer to dates, but there was certainly plenty blade-work going on at Hounslow in 1668.
Much has been declared regarding the period following the end of the civil war and certainly many Germans found themselves in Oxford, either at Wolvercote or Gloucester Hall. Despite this, and despite the much repeated statement that all the mills were commandeered by Cromwell and converted to powder mills, there remained significant activity. Obviously, Cromwell was not so stupid as to totally eradicate his own source of weapons. Kindt was in Stone's mill; Cook and Risby were still there; and Dell was certainly working for one of them until taking over either Cook or Kindt's (Stone's) mill. Probably Kindt's as I suspect that Dell had served his time with Kindt. Also, Peter Munsten and Johannes Hoppie were still around and were actually approached by representatives of King Charles 2nd regarding re-establishing a native sword-works. The king, in 1674, was very keen to achieve this, but sadly nothing came of it, despite the London Cutlers approving of the project. It came to nothing because it was not deemed practical in the light of massive imports flooding into the country, and the Cutler's Company lacking the power to prevent it. They had repeatedly asked for the powers to not only curb poor quality imports and Birmingham junk, but also to prevent the enormous population of highly skilled Huguenots in London from taking work of the English. However, what is sometimes overlooked is that Charles 2nd created and privately funded his own army, and those standing troops were exercising on Hounslow Heath, so any smiths and furbours around at the time will have found plenty work. In fact, Heinrich Hoppie jnr. and Peter Henkels returned to Hounslow and were working with Dell until they all moved up to Shotley Bridge in 1685. This was, of course, absolutely in keeping with the need to arm the Royalist and Catholic militia that abounded in the Northern counties and Scotland. Consequently, this blade may well have come from Hounslow but equally may have been made by Huguenots operating in London (Hounslow was outside of London). I am not au fait with the history of basket hilts but I do know that pre. civil war Stone (1629 - 1642) was making hilts from brass which seriously angered the Cutler's Company who considered them insubstantial. Actually, looking at the name Humffreies, and the spelling of Londin I feel certain it was a Huguenot product. Last edited by urbanspaceman; 13th March 2023 at 10:04 PM. Reason: Final comment. |
13th March 2023, 10:45 PM | #11 |
Arms Historian
Join Date: Dec 2004
Location: Route 66
Posts: 9,937
|
Keith thank you for responding on this, and your research on English sword making reflects the outstanding command of this history which is profoundly seen in your newly published "The Crown and Crossed Swords: German Sword Smiths in Shotley Bridge".
While Shotley was a later evolution of the great Hounslow venture of the earlier 17th century with German makers, as you well note there was still notable activity there even in the 1660s. There was a great dispersal of many of the smiths there when Cromwell overtook Hounslow in 1642, when a number of them left to follow Charles I to Oxford. Still, a number remained and as you well point out, Cromwell, despite turning some of them turned the mills into powder making sites. still had sword making activity. I think your suggestion on Hugeunot potential for this blade is well placed. It seems this convention of adding ANNO then date practiced it seems notably in Hounslow, then London on the blades indicates this was quite plausibly as indicated. The makers name on the blade HVMFFREIS and the curiously spelled LONDIN, seem telling. No other blades marked London have this and are spelled correctly. While Hounslow may have had activity, it seems that while it was in the proximity of London (12miles away) it was not technically in jurisdiction of the Cutlers Co. (which is why they could get away with the brass hilts). It does seem there was always a pretty brisk 'import' of German blades from Hounslow through Shotley and in the clouded periods between where numbers of independent cutlers were supplying the Board of Ordnance. Oddly John Hawgood petitioned the B/O for permission to import some Solingen blades to fulfill his contact in 1685. Perhaps he was adhering to rule as he was a master of the Cutlers Co. 1687. Just wanted to add some of what I have been absorbed in concerning this blade on this basket hilt by Thomas Humphries, whose name does not seem to occur in any reference thus far. It does seem this is a genuine heirloom blade mounted virtually a century later in this remarkable Scottish Stirling style hilt. I had not thought of the Huguenot potential, and as always, you come up with these astute thoughts often not thought of . |
13th March 2023, 10:59 PM | #12 |
Member
Join Date: Sep 2021
Location: New Zealand
Posts: 261
|
Thank you for your insights Keith, on the topic of your book, is it still possible to order a physical copy?
Thanks |
14th March 2023, 12:13 AM | #13 |
Member
Join Date: Sep 2017
Location: Tyneside. North-East England
Posts: 530
|
Book
Hello Radboud.
The book has not actually been published. It will be a companion to the TV doc. - whenever that is - so copies have been printed by my local printer for reference and promotion. I sent one over to Jim. If you are in the UK, you can get the printing company to print one copy and mail it to you. A lot of folks have done this. Last price was £20 plus £5 for P&P. It is 148 pages in B5 format (10 x 7 inches) heavy glossy stock with a spiral bind... much better than the final commercial version will be: I think that may be a luxury magazine format. If you are not in the UK I can send you one but it is not cheap to post abroad; I think I paid £10 to send Jim's to Texas. Let me know how I can help. Keith. |
14th March 2023, 12:17 AM | #14 |
Member
Join Date: Sep 2017
Location: Tyneside. North-East England
Posts: 530
|
alternatively
I can send you a 15mb pdf screen res copy by email or a full size 145mb pdf by WE which you can then have printed in NZ.
The WE transfer system is very good. Either option is free to you of course. Last edited by urbanspaceman; 14th March 2023 at 12:18 AM. Reason: ps |
14th March 2023, 02:33 AM | #15 | |
Member
Join Date: Sep 2021
Location: New Zealand
Posts: 261
|
Quote:
I have an address in the UK that it can be posted to, I'll send you a PM. Cheers Bastiaan |
|
14th March 2023, 11:06 AM | #16 |
Member
Join Date: Sep 2017
Location: Tyneside. North-East England
Posts: 530
|
PM
I think I sent you a PM but it is not clear if it actioned. Let me know.
|
15th March 2023, 03:07 PM | #17 |
Member
Join Date: Jun 2022
Location: San Diego
Posts: 56
|
Swept Hilt Rapier
Yes - I acquired this rapier and dagger in San Diego in 2012 via trade. there was no provenance unfortunately.
|
|
|