![]() |
![]() |
#1 |
Member
Join Date: Oct 2007
Posts: 2,818
|
![]()
There has been a lot of questions over the years about original resins in relation to weapons manufacture.
I am looking for a little direction with traditional Turkic resin solutions used in sword manufacture for securing grip slabs, grip straps, guards and no doubt holding scabbard leathers and suspension fittings in place. Whilst I am looking further in to the Turkic regions and asking for a little help I think it would also be well placed if the thread developed in to an entire region specific method of creating native resins for weapons not modern epoxy componds. It is bound to differ greatly from country to counry, region to region and would be well worth seeing the any diferences in say a Nepalese Kukri and Burmese Dha or a Turkish Kilij and a Mandau from Borneo etc. I am sure many could benefit from this knowledge being shared in one thread for easy reference.. I look forward to reading about this from those better versed on the subject. Gav Last edited by freebooter; 18th March 2011 at 08:49 AM. Reason: Additions |
![]() |
![]() |
![]() |
#2 |
Member
Join Date: Dec 2004
Location: What is still UK
Posts: 5,780
|
![]()
Gav, they very probably along with resins used "animal glue" I can still remember a rock hard pot of it in the school metalwork department. This would be better than many resins.
|
![]() |
![]() |
![]() |
#3 | |
Member
Join Date: Oct 2007
Posts: 2,818
|
![]() Quote:
I look forward to seeing traditional recipies of any relevant form now that you have bought this to my attention. thanks Gav |
|
![]() |
![]() |
![]() |
#4 |
Member
Join Date: Mar 2010
Location: Wisconsin
Posts: 109
|
![]()
Hopefully this tidbit is of some interest. I have heard of fish glue being used to fasten Chinese spear heads to their shafts. Unfortunately I do not have a recipe or literary source to site. No doubt, one idea often leads to another though so I thought it was worth mentioning.
|
![]() |
![]() |
![]() |
#5 |
Member
Join Date: Dec 2004
Location: Houston, TX, USA
Posts: 1,254
|
![]()
fish-bone/hide/hoof glue is more brittle than boiled down tree sap (pitch/resin); thus it is a good ad-hesive, but a poor co-hesive for filling large gaps, setting tangs, etc. Also, I think it remains water-soluble? Thus it is not traditionally used by professional cutlers for this pupose AFAIK although my experience of Chinese spears specifically is slight. Never seen it on a sword except as a non-professional after-market repair.
I am very interested to read about pitch/resin; tree species, thickening and application techniques, etc. ![]() ![]() |
![]() |
![]() |
![]() |
#6 |
Member
Join Date: Jun 2006
Location: ca, usa
Posts: 92
|
![]()
Great thought Gav - an official glue thread!
I'll try to make a humble contribution in regards to a Japanese "rice glue". If I remember the process correctly, one would grind down rice to a fine powder (mortar and pedestal) and then add water to make a paste. Apply the paste, let dry, and you had a semi-decent glue. I haven't tried this myself, but a friend had some mixed results with it though. Maybe someone else has better information on rice glue process. I'd be interested in anyone's experience with making ( or information regarding) the black pitch that is found in PI and Indonesian weapons. What is that stuff? tom |
![]() |
![]() |
![]() |
#7 |
Member
Join Date: Sep 2010
Posts: 11
|
![]()
There is mastic, the resin of Pistacia Lentisicus, it grows throughout the mediterranean I know it was in wide use across moughal India attaching tulwar blades to hilts. I don't remember anything about the turks using it.
|
![]() |
![]() |
![]() |
#8 | |
Member
Join Date: Nov 2006
Location: The Netherlands
Posts: 2,224
|
![]() Quote:
Here is a thread giving some details : http://www.vikingsword.com/vb/showth...ighlight=damar You can buy damar maybe in specialised paint stores. (as in paint used for paintings) But when you buy it from such a store it is than very clean and not black / dark at all. Best regards, Willem |
|
![]() |
![]() |
![]() |
#9 |
EAAF Staff
Join Date: Feb 2005
Location: Centerville, Kansas
Posts: 2,196
|
![]()
I'm not sure if this is exactly what you are looking for but here are a few links on cutler's resin that might be of some interest.
http://en.wikipedia.org/wiki/Cutler's_resin http://www.marquis-kyle.com.au/mt/000646.htm http://www.primitivearcher.com/smf/i...e;topic=4491.0 Robert |
![]() |
![]() |
![]() |
#10 |
Member
Join Date: Dec 2004
Location: Houston, TX, USA
Posts: 1,254
|
![]()
The cutler's resin Robert mentions sounds like the stuff European cutlers use/used in table cutlery. It is rather chalky and not suitable for sword tangs.
I have a chunk of tree resin out of a tulwar hilt that is reinforced with twisted copper wires a-la re-bar. The use of the right tree is important and from what I read in old sources, the process is rather tricky to get "just right" Also, modern artist's/jeweler's black pitch is not the same by any means as the stuff inside old Asian sword handles, BTW. Specifically, it is softer, in my experience. |
![]() |
![]() |
![]() |
#11 |
Member
Join Date: Mar 2006
Location: Room 101, Glos. UK
Posts: 4,167
|
![]()
nepali 'laha' used to glue on khukuri grips is made from tree resin and buffalo dung (for the fibre), maybe with a bit of beeswax. smells wonderful when heated
![]() |
![]() |
![]() |
![]() |
#12 |
Member
Join Date: Dec 2004
Location: What is still UK
Posts: 5,780
|
![]()
Gum Arabic, might be more suited to the region. My dabblings with tree and damar is that they are brittle unless very thick in section. Mixed with bees wax makes it much less brittle but opaque and the colour will depend on how dark the wax is. Adding powdered charcoal also seems to add to the hardness. There are resins that when set are not brittle and clear, I have examples but have no idea what the source is.
Picture of resins and small piece of resin with beeswax and 1kg block of beeswax actually two 500g blocks fused together. Dark colours might come from resin found in the wild or locally preperation as opposed to buying an industrial prepared product. Also one has now idea what additions and handling an item might have been through in the original making. Last edited by Tim Simmons; 19th March 2011 at 09:58 AM. |
![]() |
![]() |
![]() |
#13 |
Member
Join Date: Jan 2011
Posts: 1,069
|
![]()
Some time back on a site dedicated to Kukri's they mentioned a mixture of resin and honey as the glue to fix tang into hilt. By the way, hooray, at last serious discussion about these fixatives. I think many of us have sadly looked at a dismounted tulwar and wondered how to get it back together.
One of the posters on sword forum international gave a rough compo he used on a kilij type sword that involved resin and brick dust along with, I think, sealing wax. |
![]() |
![]() |
![]() |
#14 |
Member
Join Date: Dec 2004
Posts: 1,247
|
![]()
I recall that the first volume of Traditional Bowyer's Bible had some recipes for traditional glues used with bows. Considering the stresses bows undergo, they might work okay.
F |
![]() |
![]() |
![]() |
#15 |
Member
Join Date: Jan 2007
Posts: 238
|
![]()
I have a kalis tang that appear to be fixed with Tien Ta Yao Gin
![]() ![]() |
![]() |
![]() |
![]() |
#16 | |
Member
Join Date: Oct 2007
Posts: 2,818
|
![]() Quote:
I must say everyone has put forth some great input in to the thread. I'd love to see it develop deeper in to manufaturing processes, even weapons specific. Gav |
|
![]() |
![]() |
![]() |
#17 |
Member
Join Date: Dec 2004
Location: What is still UK
Posts: 5,780
|
![]()
Many Indian and other Asian weapons have the tang set in a grainy plaster/cement like compound. In trying to repair a choora hilt I found the tang held with this substance which hand become very crumbly.
This substance is like a fine lime mortar. Lime mortar in ancient. Last edited by Tim Simmons; 20th March 2011 at 09:59 AM. |
![]() |
![]() |
![]() |
#18 |
Member
Join Date: Jun 2006
Location: ca, usa
Posts: 92
|
![]()
Ok, So Damar is just pine pitch glue (Damar Pine) with some combination of charcoal, beeswax, and some other hardening/bonding agent (clay,fiber,etc). That's been helpful reading, thanks. So if I understand this right, Damar and the European cutler's resin were relatively the same in so far as they are all pine pitch glues?
I found the whole process to make pitch glue nicely outlined here: http://www.survivaltopics.com/surviv...ng-pitch-glue/ |
![]() |
![]() |
![]() |
#19 | |
Member
Join Date: Dec 2004
Posts: 1,712
|
![]() Quote:
The Laha I saw used used in Dharan Nepal in 2005 was boiled tree resins,saps & tars mixed with hard powderd or ground substances like stone, bone & buffalo horn dust etc. untill it is of the right quality & consitancy. Occasionaly its dark brown mostly its black. I expect many different handy ingriediants have been chucked into it over the years. spiral |
|
![]() |
![]() |
![]() |
#20 |
(deceased)
Join Date: Dec 2004
Location: OKLAHOMA, USA
Posts: 3,138
|
![]()
THE SAME PITCH USED TO CAULK CRACKS, PROTECT ROPES AND GEAR FROM MOISTURE ON SAILING SHIPS IS OFTEN USED TO WATERPROOF AND SECURE BLADES AS WELL AS WOVEN CORDS ON WEAPONS. NATIVE AMERICANS USED NATURALLY OCCURRING PETROLEUM FOUND IN SEEPS ON ROCK FACES OR POOLS OR TAR BALLS FROM BEACHES. ASPHALT OCCURS NATURALLY IN QUITE A FEW PLACES AND WOULD HAVE BEEN AVAILABLE AND YIELD GOOD ADHESIVES. THE LABEREA TAR PITS IN CALIFORNIA AS WELL AS OTHER SEEPS COME TO MIND AND NO DOUBT WERE TO BE FOUND HERE AND THERE. IT WORKED WELL FOR SEALING BASKETS TO HOLD LIQUIDS AS WELL AS TO SECURE POINTS OR WATERPROOF GEAR. NO DOUBT THESE NATURALLY OCCURRING SEEPS WERE AVAILABLE IN MANY AREAS AND PROCESSED AND USED FOR MANY THINGS BY MANY SOCIETY'S.
I BELIEVE THE SAP (RAW LATEX) FROM THE RUBBER TREES WERE PROBABLY PROCESSED AND USED FOR SIMILAR PURPOSES. THERE WOULD BE MINERAL , VEGETABLE AND ANIMAL ADHESIVES AND GLUES FROM MANY SOURCES USED. PERHAPS SOMEONE FROM AUSTRALIA COULD ENLIGHTEN US ON THE PREPARATION OF SPINIFEX GRASS AND GUM TREE RESINS USED BY THE ABORIGINALS. ADHESIVES THAT WERE WATERPROOF SEEM TO BE PREFERRED ESPECIALLY ON WEAPONS OR TOOLS THAT WOULD SEE A LOT OF USE. I HAVE DUG UP LUMPS OF BLACK ADHESIVE IN OLD INDIAN CAMPS SEVERAL HUNDRED YEARS OLD. I HAVEN'T TESTED THEM BUT SUSPECT THEY ARE NATURAL PETROLEUM/TARS WHICH ARE HIGH IN PARAFFIN AND WATERPROOF. Last edited by VANDOO; 22nd March 2011 at 04:36 AM. |
![]() |
![]() |
![]() |
#21 |
Member
Join Date: Oct 2008
Location: Manila, Phils.
Posts: 1,042
|
![]()
In western Visayas particularly in Panay, the sap from the breadfruit tree (local name is kamansi) is traditionally used as blade tang adhesive.
From a Hiligaynon-English dictionary: kalólot, To apply any sticky, viscous material. Ginakalólot sa ápal sang binángon ang tagók sang kamánsi. The juice of the bread-fruit is used for fastening the handle of a bolo.I think in Moroland, I think a tree sap called galgal is used. Spunjer would know this better. |
![]() |
![]() |
![]() |
#22 | |
Member
Join Date: Jan 2007
Posts: 238
|
![]() Quote:
![]() ![]() I read some articles about what might be used on mandau: nyatu/nyatoh and sambun, some mention getah merah and getah putih which might relate but I can't tell how they differ. Attached is gum/resin product from Indonesian forestry dept. website. |
|
![]() |
![]() |
![]() |
#23 |
Member
Join Date: Oct 2007
Posts: 2,818
|
![]()
This is great stuff guys, Pandora's box has been opened.....
Thanks heaps for the efforts. Gav |
![]() |
![]() |
![]() |
#24 | |
Member
Join Date: Jan 2007
Location: The Netherlands
Posts: 1,324
|
![]() Quote:
|
|
![]() |
![]() |
![]() |
#25 | |
Member
Join Date: Jan 2007
Posts: 238
|
![]() Quote:
![]() I would like to add: this could be the one used for keris/pedang hilt core which incorporated silver wrapping. Last edited by tunggulametung; 22nd March 2011 at 01:34 PM. |
|
![]() |
![]() |
![]() |
#26 | |
Member
Join Date: Oct 2008
Location: Manila, Phils.
Posts: 1,042
|
![]() Quote:
Closely related to what we call kamansi would be rimas, which in Malaysia or Indonesia is sukun. Additional info is here and here. Perhaps the sap of rimas/sukun will also do the job. By the way, getah in your language is gata in ours, and they mean the same thing. ![]() |
|
![]() |
![]() |
![]() |
#27 |
Member
Join Date: Dec 2004
Location: Witness Protection Program
Posts: 1,730
|
![]()
yep, galgal is indeed used, but i'm not sure if that's the colloquial term for sap, or the name of the tree itself.
incidentally, i'm working on a kris right now that somehow the tang of the blade is protruding from the handle; i believe the wood shrunk and eventually pushed it out. fortunately, i was able to salvage the galgal, first time i've done that, so i could actually refit the blade using the original resin. here's the picture of the galgal: ![]() |
![]() |
![]() |
![]() |
#28 | |
Keris forum moderator
Join Date: Aug 2006
Location: Nova Scotia
Posts: 7,100
|
![]() Quote:
![]() |
|
![]() |
![]() |
![]() |
#29 | |
Member
Join Date: Jan 2007
Posts: 238
|
![]() Quote:
![]() ![]() @ Migueldiaz, yes sukun is similar but kluwih has more esoteric properties in Java ![]() ![]() |
|
![]() |
![]() |
![]() |
#30 | |
Member
Join Date: Oct 2008
Location: Manila, Phils.
Posts: 1,042
|
![]() Quote:
![]() |
|
![]() |
![]() |
![]() |
|
|