Question about barrel stamping

fahnenschmied · 22nd September 2009, 02:58 PM

Pardon me rolling out this question as my first post, but the museum that I work for is making a new exhibit and I happened to notice an old gun that was planned to be displayed. The tag proclaimed it to be a "Pennsylvania long rifle" but I knew this to be untrue, because it had a shortened fowler barrel. It is a gun that has been restocked sometime in the early 1820s or so, in a German-american style, but as I don't worship at the American Long Rifle Shrine, I don't know which style or school it would be from. The work was surely done by an American somewhere here. But that is not my question. What interested me was the barrel and remnant of the trigger guard. To judge from the length of the octagonal portion of the breech, it must have been a barrel of considerable lenth, about five or so feet....its cut down to about 36 -38 inches now. About twenty or sixteen bore in size - smaller than 12. No visible proof marks that I know, the only mark visible on the barrel - short of unstocking it - is a punch mark about 4 by 8 millimeters with the figure of a standing man holding some kind of spear. I was hopeful someone knew this mark or could possibly direct me to an online guide to such marks....I can't find much myself.
The other part of this rebuilt gun that is probably original to it is the trigger guard. The front finial is surely from the 1720s to the 1740s; but the rear of the guard has been modified to resembled a longrifle guard. Sorry no photos are at hand. Possibly the rammer pipes are original to that, but the lock is from the 1820s so no help there!
I feel this must have been something like a "long fowler", but I'd like to have a better idea of where this barrel came from.

I stumbled on this forum looking for decent pictures of old guns to build, I am totally amazed at the photos found here of handcannons, matchlocks and the accoutrements for them - far better than any book I've ever seen - or any museum I've been to!
I just hope somebody can help me with a "modern" gun question.

many thanks,

Dave

Matchlock · 22nd September 2009, 05:44 PM

Welcome, Dave!

As you rightly remarked, photos are the most important thing. Please do not expect all of us to have supernatural gifts or be omniscient.

Good and detailed images would be an indispensable prerequisite for any substantial comment on 'your' gun in question.

Best,
Michael

Jim McDougall · 23rd September 2009, 03:41 AM

Hello Fahnenschmeid, and I'd like to welcome you to the forum! I'm really glad to see your question, a topic that I seem to have been pretty well immersed in of late. The recent topic on Mormon guns (the Nauvoo Legion) has actually led into a great deal of focus on these kinds of guns.
These guns were well known throughout the midwest regions which were in those days the wild west of this young country, and there were many gunsmiths from primarily Germany and other European countries who plied thier craft in developing populations here.

The term 'long rifle' seems to have been almost indiscriminately applied to flintlock rifles sold and used from Pennsylvania to Kentucky and Missouri.
I'll check some references here, but some photos would really help, especially of that marking. Sounds like an intriguing gun!

Thank you for posting here!!! Very much appreciated.

All the best,
Jim

fahnenschmied · 23rd September 2009, 04:56 AM

Hello all, I will strive to get a photo or two, but as is all too common in the museum field - there are droves of people working with things they know absolutely nothing about, and the one person in charge of this exhibit is a former boss of mine who is the most unpleasant person I've ever worked with. Care must be taken to not alarm them that I am trying to somehow do their job, or show how incompetent they really are, etc.
I just thought it might be worth a try without photos, as there are many marks I can guess at from a description.
"Long rifles" are not of my concern at the moment, aside from the fact they are rather over represented here....by far the predomiant arm in this state - North Carolina - was smoothbore and of English or European manufacture.

Had the rear octagonal section of this barrel been shorter, I might have thought it was a reworked French trade gun, as the guard finial reminded me
of such shaping. Had there been lines on either side of the guard bow, I'd have thought Dutch. But perhaps that detail got removed in its rebuilding...

If I can get permission I'll make some photos...

celtan · 23rd September 2009, 02:31 PM

: )

Been there, I can conmiserate. I have even seen tourist-market toys "preserved" within humidity/temperature regulated enclosures, expensive displays, you know. Cheap modern replicas cared for as 18th C. Brown Besses. Rare artillery pieces left to rot. Galvanism corroding touching blades of different metallic compostion. Flintlocks and Percussion Locks displayed with their hammers in either Ready or Safe positions. Red rust on ancient blades...

The reaction of the "curators" after being informed? None. That would be like admitting they committed a gaffe. Nothing changes.

And they all limit access to their caches, as if they actually belonged to them, instead of being sources of knowledge meant to be shared.

Nuff'sed

Send pics, if you can!

Manuel Luis

Quote:

Originally Posted by fahnenschmied

Hello all, I will strive to get a photo or two, but as is all too common in the museum field - there are droves of people working with things they know absolutely nothing about, and the one person in charge of this exhibit is a former boss of mine who is the most unpleasant person I've ever worked with. Care must be taken to not alarm them that I am trying to somehow do their job, or show how incompetent they really are, etc.

Jim McDougall · 24th September 2009, 02:57 AM

While awaiting photos, if possible, especially of the marking, I thought I would just add a few notes. Though certainly outside my usual fields of study, as I have noted, Americana has become increasingly interesting as I travel into these historical regions. I just left Utah heading into Idaho toward Washington, Lewis & Clark regions.

Apparantly by the 1820's and 30's, a number of Pennsylvania makers were making 'short' barrel flintlocks, such as B.D.Gill of Lancaster; John Krider of Philadephia and S.Shuler of Liverpool. I think that the English fowling guns that served as prototypes for the fowling guns in America had very long barrels, but few, if any were produced in America until after the Revolutionary War. One of the earliest producers noted was Thomas Palmer of Pennsylvania.
While fowling guns were typically of smaller caliber, it seems they were part round and part octagonal in the barrel if I understand correctly. The 'long rifles' such as the famed Hawken were of much larger calibers.

I understand also that until the mid 19th century, flintlock smoothbores were preferred in many cases due to simplicity in procuring powder and material for ammunition vs,. difficulty in same acquiring caps or cartridges for the newr cap and ball guns.

Jim McDougall · 24th September 2009, 05:39 AM

Dave, in continuing to try to help with the marking, I realize in rereading your posts you already have obviously well established knowledge on these guns, so please accept my suggestions as just that. I have very limited resources here with me, especially on guns, but I always enjoy a challenge, especially if I can learn from it !

You say the marking is a man holding a spear. There were armourers in Germany in the 17th century that used standing figures holding indiscernable weapons, one was Hoppe (Hoppie) of Solingen c.1630; the other Horman Michael of Munich c.1670. While these are shown as 'swordsmiths' ("Armourers Marks" Gyngell, 1959, p.39) I am thinking that perhaps the image might have been copied by a gun or barrel maker in Pennsylvania in latter 17th into the 18th century. It is well known that the Pennsylvania 'Duetsch' (not Dutch) establishing gunmaking as early as c.1719. The well known Jaeger rifles were progenitors of the 'Kentucky' and Pennsylvania long rifles.

I have found a number of references that may discuss more on possibly determining more of the form of this rifle, but as you note you are more focused on the marking. Most of the references I have seen that reference these obscure markings on the trade items and various weaponry in America in colonial times seem to pay more attention to tomahawks and axes, but there must be others that address the guns..still looking.

Manolo, extremely well said observations!!!! I agree many museums are sad indeed in the way they deny proper care to important pieces of history, and fail to share them with those who seek preserving history, regardless of bureaucratic budgets and ajendas.

All best regards,
Jim

fahnenschmied · 24th September 2009, 03:09 PM

[QUOTE=I have found a number of references that may discuss more on possibly determining more of the form of this rifle, but as you note you are more focused on the marking.

....Thats just my point I am trying to get across to my museum - it is not a rifle at all, never was, only a gun restocked at a later time with an American rifle style stock without a patchbox. I was interested in barrel markings because that is my best clue as to what it might have been.
Most English barrels I've ever messed with from the time have some sort of view and proof marks. What I'm really looking for at the moment is a list or chart with 18th century proofmarks, or barrel marks, from France, Holland, Belgium, Spain and elsewhere in Europe. Its not a Suhl chicken, thats for sure!
I am almost certain that the barrel isn't American made. The only Pennsylvania barrel marks I know in imitation of others are the marks on some Leman made guns in imitation of Birmingham ones on some guns made for the Indian trade.

Yes, sometimes I see things that make me wonder....artillery and vehicles slowly rotting outside in the rain....bows left strung...locks with the cock fully back...things drastically mislabeled. Once as a lowly college student I saw a nice old german wheellock rifle on display at our state museum, but the spring bridle had been put on the wrong way. I tried to tell the curators about it but I'm not sure they tell which gun I was talking about, or what a wheel lock was...

Dave

Jim McDougall · 24th September 2009, 03:53 PM

[QUOTE=fahnenschmied][QUOTE=I have found a number of references that may discuss more on possibly determining more of the form of this rifle, but as you note you are more focused on the marking.

....Thats just my point I am trying to get across to my museum - it is not a rifle at all, never was, only a gun restocked at a later time with an American rifle style stock without a patchbox. I was interested in barrel markings because that is my best clue as to what it might have been.
Most English barrels I've ever messed with from the time have some sort of view and proof marks. What I'm really looking for at the moment is a list or chart with 18th century proofmarks, or barrel marks, from France, Holland, Belgium, Spain and elsewhere in Europe. Its not a Suhl chicken, thats for sure!
I am almost certain that the barrel isn't American made. The only Pennsylvania barrel marks I know in imitation of others are the marks on some Leman made guns in imitation of Birmingham ones on some guns made for the Indian trade.

Yes, sometimes I see things that make me wonder....artillery and vehicles slowly rotting outside in the rain....bows left strung...locks with the cock fully back...things drastically mislabeled. Once as a lowly college student I saw a nice old german wheellock rifle on display at our state museum, but the spring bridle had been put on the wrong way. I tried to tell the curators about it but I'm not sure they tell which gun I was talking about, or what a wheel lock was...

Dave[/QUOTE]

It does sound like this is likely to be as you suggest, a restocked barrel using some earlier components, which certainly was not an uncommon thing in those times. One of the key things emphasized in studying frontier history is that 'nothing was thrown away', signaling the profound recycling of the important weapons components.

I am hoping that our readers who are focused on firearms might have the tables or charts needed that might include something similar to the markig you describe. The closest thing I have found is the two standing figures I have noted from Germany in the 17th century. As always, such marks often quickly diffused into the arms producing community as they sought to capitalize on the standing reputation of the original users.

Thank you for adding the extra detail and comments, its good to have someone with interest and clearly sound knowledge on these American colonial arms. Even though you note certain disinterest in the 'American long rifle worship' , you obviously have excellent working knowledge in its particulars.

All best regards,
Jim

Jim McDougall · 25th September 2009, 04:58 PM

Continuing research on this, and with my limited knowledge on these guns, I am wondering more about the descriptions. As far as I can discover, the bores on most of the fowlers I have found are much larger, many of .70 cal range on most of the European barrels. The bore described here seems much smaller and is unclear. It is unclear whether the barrel, obviously shortened, is fully octagonal or partially round, partially octagonal as many of them are.

It is noted there are no visible proof marks which seems unusual as most European barrels did have some sort of proof, perhaps the shortening of the barrel removed the proof? I am not familiar which part of the barrel would have been removed in this modification.
Also, if anyone out there might answer here, what does the term 'pinned' mean, on the barrel? It suggests that this feature would preclude the use of a plug bayonet.

Apparantly just prior to, and during the Revolutionary War, in 1775 there was a Colonial organization termed the "Committee of Safety" which was a number of gunsmiths in the colonies who produced guns for the cause. While the numbers seem unclear, it is noted these guns, whether produced wholly or refurbished from extant components, were typically unmarked as the smiths did not wish to face repercussions from the British. With this, as far as is known, none of these guns have been effectively identified, however one profound attempt occurred with "Committee of Safety Musket? Prove it", (William H. Guthman, Man at Arms magazine, Jul.Aug.1979).

It appears that many guns were dramatically shortened in the barrel length for either horseback use or use in thickly forested or rugged terrain, while often for hunters, it seems possible for some of the guerrilla type warfare well known. Although the actual employment of 'guerrilla' type warfare by Colonial troops is often though universal, the truth is that for the most part, especially where forces were trained by von Stueben, the European battle formations were used.

In hopes that perhaps somebody out there might join in, I will keep researching while we wait. It is great to learn more on these guns, and seems surprising there appears to be so little interest out there on this historical period or these fascinating weapons!

Best regards,
Jim

fernando · 25th September 2009, 06:52 PM

Hi, can i say nothing with sense?

Quote:

Originally Posted by fahnenschmied

...What I'm really looking for at the moment is a list or chart with 18th century proofmarks, or barrel marks, from France, Holland, Belgium, Spain and elsewhere in Europe...

Judging by the quoted dimensions of the punch mark and its accuracy, you will tell how well you discern its details because, if it is indeed a man holding a spear, i would say it doesn't figure in the European proof mark books. The closest thing you find there is an arm holding a (sort of) scimitar, a nitro proof London mark, which certainly you know and, anyway, has nothing to do with the spear man.
This would certainly be a maker's mark.
I will PM this thread to Stuart (kahnjar1). If i was not dreaming, the other day he offered to help decoding firearms marks.

Quote:

Originally Posted by Jim McDougall

...It is noted there are no visible proof marks which seems unusual as most European barrels did have some sort of proof, perhaps the shortening of the barrel removed the proof? I am not familiar which part of the barrel would have been removed in this modification...

A zillion things can happen to firearms during their lifes but i guess that, massively, barrels are shortened by the muzzle. Exceptionaly by the time flintlocks were converted to percussion, one of the early modifications was cutting the barrel by the breech and screw a new one, with percussion facilities; but this type of operations is a system conversion and not necessarily an actual barrel shortening. It should be also to consider that, very often you find punch proof marks under the barrel, close or not far from the breech. Also plenty gun or barrel makers (British and others) sign the pieces in this area.

Quote:

Originally Posted by Jim McDougall

... It appears that many guns were dramatically shortened in the barrel length for either horseback use or use in thickly forested or rugged terrain...

As also to used them for private defence, concealed under the coat, but a musket shortened from five foot to 36-38" is still a huge beast, still an open field thing, right ?

Fernando

.

kahnjar1 · 25th September 2009, 10:07 PM

Hi Dave, and welcome to the Forum. Thanks Fernando for prompting me to act on this.

I DID see the thread but lack of a pic put me off somewhat. Anyway better late than never I guess. I have had a search thru my stuff and the only mark (apart from the usual Proof Marks) I can find of a man holding anything, is this one.
Regards Stuart

fahnenschmied · 25th September 2009, 11:02 PM

Well, now, that is a bit similar! But not exact....for one, the punch was a very neat and straight rectangular outline. And I think - but am not at all certain - that the shaft was on the other side of the figure. Not sure though. I haven't had a chance to try to get a photo yet - and I am not sure I can do it myself. I may have to woo someone with a camera adapted for closeup work, and the skill to operate it. It may not be for a few days yet as I am in the middle of trying to finish a galloper gun carriage - or a Lamon Lafette, if you will - for another historic site by next Saturday.
And so another hurried reply....
Yes, I have some familiarity with firearms....I do have an 1850s British 12 bore barrel where the Birmingham proofs were hidden on the bottom, as if they were something to be ashamed of. Perhaps the conservator will let me dismantle it....we'll see...

Dave

Jim McDougall · 26th September 2009, 06:32 PM

Outstanding teamwork Fernando and Stuart!!! You guys are great, and this is what I always hope for around here...working together to solve some of these mysteries.
I can understand the dilemma Dave is experiencing getting the photos, and its great to have him working with us in adding to the descriptions concerning this marking. It's kind of fun in a way, sort of like police investigation going through 'mugshot' books

with the help of a witness. Definitely interesting!!

Fernando, thank you for the well explained comments pertaining to the shortening of gun barrels. After reading that it reminded me of the Snider-Enfields where changed to breech loading they removed a section of the barrel at the breech to open for insertion of the cartridges. Good notes on the shorter guns for private defense also, and agreed they still would be a bit unwieldy as 'concealed' weapons with these barrels.

On the note about the spear holding figure, in "Armourers Marks" by Gyngell (1959) on p. 39, where one marking is of a warrior standing with what may be either a gun or a spear held in his right hand, attributed to Hoppe of Solingen c.1630; another by H.Michael of Munich c.1670 holding also in right hand some type of shorter hafted weapon.
These are supported somewhat by the markings with similar theme added by Stuart, though these seem more stylized figures holding halberds, and the bloused pantaloon costume of European fashion seems apparant.

These images are clearly intended to represent native figures, most probably of the New World and impressions of the so called 'savages' encountered in colonial settings. Europeans were intrigued by the 'wildness' of these new civilizations and the markings reflect this interest by the suggestion of power implied by the representation of these warriors.

It does not seem unlikely that the use of these figures might have been applied to trade weapons or materials intended for use in the Colonies or in dealings with the Native Americans. As mentioned, with the demand for materials for servicing weapons and more weapons were needed, any components at hand would have been used in furbishing or altering them.

There is still the question of the actual bore of this barrel, which would seem to add a bit more perspective in this analysis.

Thanks very much guys.

All best regards,
Jim

fahnenschmied · 30th September 2009, 04:14 AM

Managed to get some photos of the relic in question. The camera made manifest some details that were impossible to see my first time with it...it does look as if there is a head of some sort on the shaft. Similar to but not exactly like the Kalthoff marks shown above...
The barrel is has a tapering octagonal breech section that terminates in a ring that is 17 1/2 inches from the breech. At present it only has about 12 1/4 more inches to the muzzle. There is a seat for a rear sight about 9 1/2 inches from the breech - whether it is original to it I cannot say, but many earlier 18th century fowlers do have rear sights on them.
Barrel is 1 3/16 (about 3cm) wide at the breech...bore seems to be right at .62. Even where it is cut off the tube is very thin, about a millimeter wall thickness.
Some question was made about the small bore of these "fowlers" - while it is true that a 12 bore throws a much better shot pattern, the lightness of the ammunition and the lightness of the gun made these smaller bores very popular, at least with the natives of this country. Just as the 19th century Northwest guns were about 24 bore, @ 58 caliber - most of the archaeologically recovered guns found in native sites here measure something from .54 to .62

fahnenschmied · 30th September 2009, 04:20 AM

Now for a few of the guard. It has been artfully altered to "rifle style" by being sawn apart and added to. Part of the front finial is gone, I think, and the rear one totally so. But apparent is the thin "neck" at the front of the guard, and the early mid eighteenth century shape still left on the front tang...I think the guard is probably the same age as the barrel...

fahnenschmied · 30th September 2009, 04:26 AM

And a parting shot...the entry pipe could also be an original part. It has been filed slightly octagonal...when...hard to say, but I would think that was a later alteration. The one rammer pipe is also similarly shaped.
Also a shot of the buttplate, rifle shaped but with odd screw placement, and also a crappy profile, showing the rifle-like lines it got when restocked.

fahnenschmied · 30th September 2009, 04:30 AM

Top of barrel. Not clear but you can see the rings where it goes from octagonal to round. There is a brass based front sight near the muzzle...

kahnjar1 · 30th September 2009, 06:18 AM

Think you need (if possible) to get a look at the underneath of the barrel. The style looks very British to me, but the mark you show says something else. The proof marks (if any) will tell the story.
Regards Stuart

cornelistromp · 30th September 2009, 08:31 AM

Hello,

the Barrel is from the second half of the 17th C and shortened.
(probably made by Matthias Kalthoff Copenhagen, Denmark.)
The lock the all mounts (also the tricker guard) and stock are later from around 1800, also the rounded top shape of the butt points me to northern Europe.

regards from Holland

fahnenschmied · 3rd October 2009, 05:39 AM

Many thanks for the reply! Is this Matthius Kalthoff the son of Peter Kalthoff? I might have to look about for some of his other work. It would be very interesting if I knew if this little gun (or parts of it) had been around here for a long time...in this area there was almost no Europeans living until 1710. Most of the original colonists here in New Bern came from Switzerland and southern Germany. However, none of the old letters from the Swiss colonists, nor John Lawson's books, mentions guns in any detail. I have always wondered if any of the colonist brought any from "home" or if they purchased them in England, where they left from. Perhaps I can try to track down just who donated this thing, but I think it was aquired in the 60s... Usually folks have everything wrong- - The musket supposedly used in the Revolution plainly has an 1808 stamped on the lockplate, or the "Gun used by my grandfather in the Civil War" is a plain old Belgian rabbit-eared double of 1880s vintage.
I cannot find any good photos online of the sort of guard I think this one was modified from. I helped a friend inlet a gun he was building, a copy of a French trade fusil from 1720 - 30; the guard looked much like this one must have when new. It could have been modified to look just like this one, in fact, its what caught my eye about this gun in the first place. I just don't know how far back that style of guard goes...
Thanks again to everybody who has given input - quite an amazing wealth of knowledge here!

Dave

kahnjar1 · 3rd October 2009, 06:03 AM

Hi again Dave,
MATHIAS KALTHOFF is also mentioned in the same book that the Peter K marks are shown in. No mention is made as to relationship of the two, but the information on Mathias is that he worked in Copenhagen 1646 - 1672 so the dates they were both working are the same except for 1 year. Maybe brothers?
Regards Stuart

pbleed · 5th October 2009, 01:28 AM

Wow. This has been an amazing read. Thank you all

Jim McDougall · 5th October 2009, 05:38 AM

Quote:

Originally Posted by pbleed

Wow. This has been an amazing read. Thank you all

I totally agree! Thanks guys, very nice work on the research on this, its great to learn more on these guns.

Peter, hello! Its good to see you here again!!!

All best regards,
Jim

fahnenschmied · 5th October 2009, 02:59 PM

Yes, thanks again for all the help! I'll see if sometime I can get the conservator to let me take the barrel off and just see what, if anything, is under the stock. I have only handled one presumably Kalthoff weapon, a magazine breechloader type, but I don't remember any barrel markings at all. It was some twenty years ago tho...
Here is a link to a fowler that has a guard much like what is (was, before modification) on our Kalthoff barreled piece. This is just what I thought our gun might have looked like - till I found out the barrel is a bit earlier. Maybe its been on three guns, not two...

http://www.aaawt.com/html/firearms/f398.html

22nd September 2009, 02:58 PM	#1
fahnenschmied Member Join Date: Sep 2009 Posts: 12	Question about barrel stamping Pardon me rolling out this question as my first post, but the museum that I work for is making a new exhibit and I happened to notice an old gun that was planned to be displayed. The tag proclaimed it to be a "Pennsylvania long rifle" but I knew this to be untrue, because it had a shortened fowler barrel. It is a gun that has been restocked sometime in the early 1820s or so, in a German-american style, but as I don't worship at the American Long Rifle Shrine, I don't know which style or school it would be from. The work was surely done by an American somewhere here. But that is not my question. What interested me was the barrel and remnant of the trigger guard. To judge from the length of the octagonal portion of the breech, it must have been a barrel of considerable lenth, about five or so feet....its cut down to about 36 -38 inches now. About twenty or sixteen bore in size - smaller than 12. No visible proof marks that I know, the only mark visible on the barrel - short of unstocking it - is a punch mark about 4 by 8 millimeters with the figure of a standing man holding some kind of spear. I was hopeful someone knew this mark or could possibly direct me to an online guide to such marks....I can't find much myself. The other part of this rebuilt gun that is probably original to it is the trigger guard. The front finial is surely from the 1720s to the 1740s; but the rear of the guard has been modified to resembled a longrifle guard. Sorry no photos are at hand. Possibly the rammer pipes are original to that, but the lock is from the 1820s so no help there! I feel this must have been something like a "long fowler", but I'd like to have a better idea of where this barrel came from. I stumbled on this forum looking for decent pictures of old guns to build, I am totally amazed at the photos found here of handcannons, matchlocks and the accoutrements for them - far better than any book I've ever seen - or any museum I've been to! I just hope somebody can help me with a "modern" gun question. many thanks, Dave

25th September 2009, 10:07 PM	#12
kahnjar1 Member Join Date: Aug 2007 Location: CHRISTCHURCH NEW ZEALAND Posts: 2,741	What about this? Hi Dave, and welcome to the Forum. Thanks Fernando for prompting me to act on this. I DID see the thread but lack of a pic put me off somewhat. Anyway better late than never I guess. I have had a search thru my stuff and the only mark (apart from the usual Proof Marks) I can find of a man holding anything, is this one. Regards Stuart Attached Images

30th September 2009, 04:14 AM	#15
fahnenschmied Member Join Date: Sep 2009 Posts: 12	A few thousand words.... Managed to get some photos of the relic in question. The camera made manifest some details that were impossible to see my first time with it...it does look as if there is a head of some sort on the shaft. Similar to but not exactly like the Kalthoff marks shown above... The barrel is has a tapering octagonal breech section that terminates in a ring that is 17 1/2 inches from the breech. At present it only has about 12 1/4 more inches to the muzzle. There is a seat for a rear sight about 9 1/2 inches from the breech - whether it is original to it I cannot say, but many earlier 18th century fowlers do have rear sights on them. Barrel is 1 3/16 (about 3cm) wide at the breech...bore seems to be right at .62. Even where it is cut off the tube is very thin, about a millimeter wall thickness. Some question was made about the small bore of these "fowlers" - while it is true that a 12 bore throws a much better shot pattern, the lightness of the ammunition and the lightness of the gun made these smaller bores very popular, at least with the natives of this country. Just as the 19th century Northwest guns were about 24 bore, @ 58 caliber - most of the archaeologically recovered guns found in native sites here measure something from .54 to .62 Attached Images

30th September 2009, 04:20 AM	#16
fahnenschmied Member Join Date: Sep 2009 Posts: 12	Now for a few of the guard. It has been artfully altered to "rifle style" by being sawn apart and added to. Part of the front finial is gone, I think, and the rear one totally so. But apparent is the thin "neck" at the front of the guard, and the early mid eighteenth century shape still left on the front tang...I think the guard is probably the same age as the barrel... Attached Images

30th September 2009, 04:26 AM	#17
fahnenschmied Member Join Date: Sep 2009 Posts: 12	And a parting shot...the entry pipe could also be an original part. It has been filed slightly octagonal...when...hard to say, but I would think that was a later alteration. The one rammer pipe is also similarly shaped. Also a shot of the buttplate, rifle shaped but with odd screw placement, and also a crappy profile, showing the rifle-like lines it got when restocked. Attached Images

22nd September 2009, 05:44 PM	#2
Matchlock (deceased) Join Date: Sep 2008 Location: Bavaria, Germany - the center of 15th and 16th century gunmaking Posts: 4,310	Welcome, Dave! As you rightly remarked, photos are the most important thing. Please do not expect all of us to have supernatural gifts or be omniscient. Good and detailed images would be an indispensable prerequisite for any substantial comment on 'your' gun in question. Best, Michael

23rd September 2009, 03:41 AM	#3
Jim McDougall Arms Historian Join Date: Dec 2004 Location: Route 66 Posts: 9,957	Hello Fahnenschmeid, and I'd like to welcome you to the forum! I'm really glad to see your question, a topic that I seem to have been pretty well immersed in of late. The recent topic on Mormon guns (the Nauvoo Legion) has actually led into a great deal of focus on these kinds of guns. These guns were well known throughout the midwest regions which were in those days the wild west of this young country, and there were many gunsmiths from primarily Germany and other European countries who plied thier craft in developing populations here. The term 'long rifle' seems to have been almost indiscriminately applied to flintlock rifles sold and used from Pennsylvania to Kentucky and Missouri. I'll check some references here, but some photos would really help, especially of that marking. Sounds like an intriguing gun! Thank you for posting here!!! Very much appreciated. All the best, Jim

23rd September 2009, 04:56 AM	#4
fahnenschmied Member Join Date: Sep 2009 Posts: 12	Hello all, I will strive to get a photo or two, but as is all too common in the museum field - there are droves of people working with things they know absolutely nothing about, and the one person in charge of this exhibit is a former boss of mine who is the most unpleasant person I've ever worked with. Care must be taken to not alarm them that I am trying to somehow do their job, or show how incompetent they really are, etc. I just thought it might be worth a try without photos, as there are many marks I can guess at from a description. "Long rifles" are not of my concern at the moment, aside from the fact they are rather over represented here....by far the predomiant arm in this state - North Carolina - was smoothbore and of English or European manufacture. Had the rear octagonal section of this barrel been shorter, I might have thought it was a reworked French trade gun, as the guard finial reminded me of such shaping. Had there been lines on either side of the guard bow, I'd have thought Dutch. But perhaps that detail got removed in its rebuilding... If I can get permission I'll make some photos...

24th September 2009, 02:57 AM	#6
Jim McDougall Arms Historian Join Date: Dec 2004 Location: Route 66 Posts: 9,957	While awaiting photos, if possible, especially of the marking, I thought I would just add a few notes. Though certainly outside my usual fields of study, as I have noted, Americana has become increasingly interesting as I travel into these historical regions. I just left Utah heading into Idaho toward Washington, Lewis & Clark regions. Apparantly by the 1820's and 30's, a number of Pennsylvania makers were making 'short' barrel flintlocks, such as B.D.Gill of Lancaster; John Krider of Philadephia and S.Shuler of Liverpool. I think that the English fowling guns that served as prototypes for the fowling guns in America had very long barrels, but few, if any were produced in America until after the Revolutionary War. One of the earliest producers noted was Thomas Palmer of Pennsylvania. While fowling guns were typically of smaller caliber, it seems they were part round and part octagonal in the barrel if I understand correctly. The 'long rifles' such as the famed Hawken were of much larger calibers. I understand also that until the mid 19th century, flintlock smoothbores were preferred in many cases due to simplicity in procuring powder and material for ammunition vs,. difficulty in same acquiring caps or cartridges for the newr cap and ball guns.

24th September 2009, 05:39 AM	#7
Jim McDougall Arms Historian Join Date: Dec 2004 Location: Route 66 Posts: 9,957	Dave, in continuing to try to help with the marking, I realize in rereading your posts you already have obviously well established knowledge on these guns, so please accept my suggestions as just that. I have very limited resources here with me, especially on guns, but I always enjoy a challenge, especially if I can learn from it ! You say the marking is a man holding a spear. There were armourers in Germany in the 17th century that used standing figures holding indiscernable weapons, one was Hoppe (Hoppie) of Solingen c.1630; the other Horman Michael of Munich c.1670. While these are shown as 'swordsmiths' ("Armourers Marks" Gyngell, 1959, p.39) I am thinking that perhaps the image might have been copied by a gun or barrel maker in Pennsylvania in latter 17th into the 18th century. It is well known that the Pennsylvania 'Duetsch' (not Dutch) establishing gunmaking as early as c.1719. The well known Jaeger rifles were progenitors of the 'Kentucky' and Pennsylvania long rifles. I have found a number of references that may discuss more on possibly determining more of the form of this rifle, but as you note you are more focused on the marking. Most of the references I have seen that reference these obscure markings on the trade items and various weaponry in America in colonial times seem to pay more attention to tomahawks and axes, but there must be others that address the guns..still looking. Manolo, extremely well said observations!!!! I agree many museums are sad indeed in the way they deny proper care to important pieces of history, and fail to share them with those who seek preserving history, regardless of bureaucratic budgets and ajendas. All best regards, Jim

24th September 2009, 03:09 PM	#8
fahnenschmied Member Join Date: Sep 2009 Posts: 12	[QUOTE=I have found a number of references that may discuss more on possibly determining more of the form of this rifle, but as you note you are more focused on the marking. ....Thats just my point I am trying to get across to my museum - it is not a rifle at all, never was, only a gun restocked at a later time with an American rifle style stock without a patchbox. I was interested in barrel markings because that is my best clue as to what it might have been. Most English barrels I've ever messed with from the time have some sort of view and proof marks. What I'm really looking for at the moment is a list or chart with 18th century proofmarks, or barrel marks, from France, Holland, Belgium, Spain and elsewhere in Europe. Its not a Suhl chicken, thats for sure! I am almost certain that the barrel isn't American made. The only Pennsylvania barrel marks I know in imitation of others are the marks on some Leman made guns in imitation of Birmingham ones on some guns made for the Indian trade. Yes, sometimes I see things that make me wonder....artillery and vehicles slowly rotting outside in the rain....bows left strung...locks with the cock fully back...things drastically mislabeled. Once as a lowly college student I saw a nice old german wheellock rifle on display at our state museum, but the spring bridle had been put on the wrong way. I tried to tell the curators about it but I'm not sure they tell which gun I was talking about, or what a wheel lock was... Dave

24th September 2009, 03:53 PM	#9
Jim McDougall Arms Historian Join Date: Dec 2004 Location: Route 66 Posts: 9,957	[QUOTE=fahnenschmied][QUOTE=I have found a number of references that may discuss more on possibly determining more of the form of this rifle, but as you note you are more focused on the marking. ....Thats just my point I am trying to get across to my museum - it is not a rifle at all, never was, only a gun restocked at a later time with an American rifle style stock without a patchbox. I was interested in barrel markings because that is my best clue as to what it might have been. Most English barrels I've ever messed with from the time have some sort of view and proof marks. What I'm really looking for at the moment is a list or chart with 18th century proofmarks, or barrel marks, from France, Holland, Belgium, Spain and elsewhere in Europe. Its not a Suhl chicken, thats for sure! I am almost certain that the barrel isn't American made. The only Pennsylvania barrel marks I know in imitation of others are the marks on some Leman made guns in imitation of Birmingham ones on some guns made for the Indian trade. Yes, sometimes I see things that make me wonder....artillery and vehicles slowly rotting outside in the rain....bows left strung...locks with the cock fully back...things drastically mislabeled. Once as a lowly college student I saw a nice old german wheellock rifle on display at our state museum, but the spring bridle had been put on the wrong way. I tried to tell the curators about it but I'm not sure they tell which gun I was talking about, or what a wheel lock was... Dave[/QUOTE] It does sound like this is likely to be as you suggest, a restocked barrel using some earlier components, which certainly was not an uncommon thing in those times. One of the key things emphasized in studying frontier history is that 'nothing was thrown away', signaling the profound recycling of the important weapons components. I am hoping that our readers who are focused on firearms might have the tables or charts needed that might include something similar to the markig you describe. The closest thing I have found is the two standing figures I have noted from Germany in the 17th century. As always, such marks often quickly diffused into the arms producing community as they sought to capitalize on the standing reputation of the original users. Thank you for adding the extra detail and comments, its good to have someone with interest and clearly sound knowledge on these American colonial arms. Even though you note certain disinterest in the 'American long rifle worship' , you obviously have excellent working knowledge in its particulars. All best regards, Jim

25th September 2009, 04:58 PM	#10
Jim McDougall Arms Historian Join Date: Dec 2004 Location: Route 66 Posts: 9,957	Continuing research on this, and with my limited knowledge on these guns, I am wondering more about the descriptions. As far as I can discover, the bores on most of the fowlers I have found are much larger, many of .70 cal range on most of the European barrels. The bore described here seems much smaller and is unclear. It is unclear whether the barrel, obviously shortened, is fully octagonal or partially round, partially octagonal as many of them are. It is noted there are no visible proof marks which seems unusual as most European barrels did have some sort of proof, perhaps the shortening of the barrel removed the proof? I am not familiar which part of the barrel would have been removed in this modification. Also, if anyone out there might answer here, what does the term 'pinned' mean, on the barrel? It suggests that this feature would preclude the use of a plug bayonet. Apparantly just prior to, and during the Revolutionary War, in 1775 there was a Colonial organization termed the "Committee of Safety" which was a number of gunsmiths in the colonies who produced guns for the cause. While the numbers seem unclear, it is noted these guns, whether produced wholly or refurbished from extant components, were typically unmarked as the smiths did not wish to face repercussions from the British. With this, as far as is known, none of these guns have been effectively identified, however one profound attempt occurred with "Committee of Safety Musket? Prove it", (William H. Guthman, Man at Arms magazine, Jul.Aug.1979). It appears that many guns were dramatically shortened in the barrel length for either horseback use or use in thickly forested or rugged terrain, while often for hunters, it seems possible for some of the guerrilla type warfare well known. Although the actual employment of 'guerrilla' type warfare by Colonial troops is often though universal, the truth is that for the most part, especially where forces were trained by von Stueben, the European battle formations were used. In hopes that perhaps somebody out there might join in, I will keep researching while we wait. It is great to learn more on these guns, and seems surprising there appears to be so little interest out there on this historical period or these fascinating weapons! Best regards, Jim

25th September 2009, 11:02 PM	#13
fahnenschmied Member Join Date: Sep 2009 Posts: 12	Well, now, that is a bit similar! But not exact....for one, the punch was a very neat and straight rectangular outline. And I think - but am not at all certain - that the shaft was on the other side of the figure. Not sure though. I haven't had a chance to try to get a photo yet - and I am not sure I can do it myself. I may have to woo someone with a camera adapted for closeup work, and the skill to operate it. It may not be for a few days yet as I am in the middle of trying to finish a galloper gun carriage - or a Lamon Lafette, if you will - for another historic site by next Saturday. And so another hurried reply.... Yes, I have some familiarity with firearms....I do have an 1850s British 12 bore barrel where the Birmingham proofs were hidden on the bottom, as if they were something to be ashamed of. Perhaps the conservator will let me dismantle it....we'll see... Dave

26th September 2009, 06:32 PM	#14
Jim McDougall Arms Historian Join Date: Dec 2004 Location: Route 66 Posts: 9,957	Outstanding teamwork Fernando and Stuart!!! You guys are great, and this is what I always hope for around here...working together to solve some of these mysteries. I can understand the dilemma Dave is experiencing getting the photos, and its great to have him working with us in adding to the descriptions concerning this marking. It's kind of fun in a way, sort of like police investigation going through 'mugshot' books with the help of a witness. Definitely interesting!! Fernando, thank you for the well explained comments pertaining to the shortening of gun barrels. After reading that it reminded me of the Snider-Enfields where changed to breech loading they removed a section of the barrel at the breech to open for insertion of the cartridges. Good notes on the shorter guns for private defense also, and agreed they still would be a bit unwieldy as 'concealed' weapons with these barrels. On the note about the spear holding figure, in "Armourers Marks" by Gyngell (1959) on p. 39, where one marking is of a warrior standing with what may be either a gun or a spear held in his right hand, attributed to Hoppe of Solingen c.1630; another by H.Michael of Munich c.1670 holding also in right hand some type of shorter hafted weapon. These are supported somewhat by the markings with similar theme added by Stuart, though these seem more stylized figures holding halberds, and the bloused pantaloon costume of European fashion seems apparant. These images are clearly intended to represent native figures, most probably of the New World and impressions of the so called 'savages' encountered in colonial settings. Europeans were intrigued by the 'wildness' of these new civilizations and the markings reflect this interest by the suggestion of power implied by the representation of these warriors. It does not seem unlikely that the use of these figures might have been applied to trade weapons or materials intended for use in the Colonies or in dealings with the Native Americans. As mentioned, with the demand for materials for servicing weapons and more weapons were needed, any components at hand would have been used in furbishing or altering them. There is still the question of the actual bore of this barrel, which would seem to add a bit more perspective in this analysis. Thanks very much guys. All best regards, Jim

30th September 2009, 04:30 AM	#18
fahnenschmied Member Join Date: Sep 2009 Posts: 12	parting shot... Top of barrel. Not clear but you can see the rings where it goes from octagonal to round. There is a brass based front sight near the muzzle... Attached Images

30th September 2009, 06:18 AM	#19
kahnjar1 Member Join Date: Aug 2007 Location: CHRISTCHURCH NEW ZEALAND Posts: 2,741	Think you need (if possible) to get a look at the underneath of the barrel. The style looks very British to me, but the mark you show says something else. The proof marks (if any) will tell the story. Regards Stuart

30th September 2009, 08:31 AM	#20
cornelistromp Member Join Date: Mar 2009 Posts: 1,058	Hello, the Barrel is from the second half of the 17th C and shortened. (probably made by Matthias Kalthoff Copenhagen, Denmark.) The lock the all mounts (also the tricker guard) and stock are later from around 1800, also the rounded top shape of the butt points me to northern Europe. regards from Holland

3rd October 2009, 05:39 AM	#21
fahnenschmied Member Join Date: Sep 2009 Posts: 12	Many thanks for the reply! Is this Matthius Kalthoff the son of Peter Kalthoff? I might have to look about for some of his other work. It would be very interesting if I knew if this little gun (or parts of it) had been around here for a long time...in this area there was almost no Europeans living until 1710. Most of the original colonists here in New Bern came from Switzerland and southern Germany. However, none of the old letters from the Swiss colonists, nor John Lawson's books, mentions guns in any detail. I have always wondered if any of the colonist brought any from "home" or if they purchased them in England, where they left from. Perhaps I can try to track down just who donated this thing, but I think it was aquired in the 60s... Usually folks have everything wrong- - The musket supposedly used in the Revolution plainly has an 1808 stamped on the lockplate, or the "Gun used by my grandfather in the Civil War" is a plain old Belgian rabbit-eared double of 1880s vintage. I cannot find any good photos online of the sort of guard I think this one was modified from. I helped a friend inlet a gun he was building, a copy of a French trade fusil from 1720 - 30; the guard looked much like this one must have when new. It could have been modified to look just like this one, in fact, its what caught my eye about this gun in the first place. I just don't know how far back that style of guard goes... Thanks again to everybody who has given input - quite an amazing wealth of knowledge here! Dave

3rd October 2009, 06:03 AM	#22
kahnjar1 Member Join Date: Aug 2007 Location: CHRISTCHURCH NEW ZEALAND Posts: 2,741	Hi again Dave, MATHIAS KALTHOFF is also mentioned in the same book that the Peter K marks are shown in. No mention is made as to relationship of the two, but the information on Mathias is that he worked in Copenhagen 1646 - 1672 so the dates they were both working are the same except for 1 year. Maybe brothers? Regards Stuart

5th October 2009, 01:28 AM	#23
pbleed Member Join Date: Jun 2005 Location: Little Rock, Arkansas Posts: 88	what a thread! Wow. This has been an amazing read. Thank you all

5th October 2009, 02:59 PM	#25
fahnenschmied Member Join Date: Sep 2009 Posts: 12	Yes, thanks again for all the help! I'll see if sometime I can get the conservator to let me take the barrel off and just see what, if anything, is under the stock. I have only handled one presumably Kalthoff weapon, a magazine breechloader type, but I don't remember any barrel markings at all. It was some twenty years ago tho... Here is a link to a fowler that has a guard much like what is (was, before modification) on our Kalthoff barreled piece. This is just what I thought our gun might have looked like - till I found out the barrel is a bit earlier. Maybe its been on three guns, not two... http://www.aaawt.com/html/firearms/f398.html