12th July 2008, 07:40 PM | #1 |
Member
Join Date: Jun 2008
Posts: 119
|
sword maintenence
does everyone use preservatives for their blades? ive been thinking about getting some linseed oil to coat mine with, as ive heard its enviromentally freindly.
what was/is "naval jelly"? just curious as to what everyone uses for their own weapons upkeep. |
12th July 2008, 07:52 PM | #2 |
Vikingsword Staff
Join Date: Nov 2004
Posts: 6,291
|
Oils Gather Dust
Rennaisance Wax .
Rick |
12th July 2008, 08:05 PM | #3 |
Member
Join Date: Dec 2004
Location: comfortably at home, USA
Posts: 432
|
Ren wax for my non-Japanese items; choji oil for the Nihonto.
Simple 3 in 1 oil for some misc stuff. DON"T USE NAVAL JELLY!! It is a gelatinized phosphoric acid - it will eat you blades - literallly. Rich S |
12th July 2008, 08:09 PM | #4 |
(deceased)
Join Date: Dec 2004
Location: East Coast USA
Posts: 3,191
|
Yes wax is the way to go even a good car wax will do.
Lew |
12th July 2008, 09:27 PM | #5 |
Member
Join Date: Jun 2008
Location: The Sharp end
Posts: 2,928
|
A steady dry enviroment is an obvious important factor. I find that a good rub with a light oiled cloth (not leaving the blade oily as it'll attract dust and airborne particles, just removing any hand grease) and my swords are generally fine. The big enemy is the inquisitive fingers of visiting friends. Someone with acidic sweat can leave a permernant corroded fingerprint in good steel overnight.
Rub the steel with newspaper to remove any grease or dirt, then a lightly oiled cloth, then a clean cloth. |
13th July 2008, 12:22 AM | #6 |
Member
Join Date: Feb 2006
Posts: 637
|
I have seen more sword blades and chain mail trashed with navel jelly than anything else.Rennaisance Wax is very good but expensive. A cheaper alternative is butcher's bowling alley wax. linseed oil never dries and collects dust.
|
13th July 2008, 09:43 AM | #7 | |
Member
Join Date: Mar 2005
Location: Australia
Posts: 676
|
Quote:
Cheers Chris |
|
13th July 2008, 10:14 PM | #8 |
Member
Join Date: Mar 2006
Location: Room 101, Glos. UK
Posts: 4,182
|
mineral oil is good for just about everything, discolors leather tho. is food safe if used on every day knives, camellia oil is also good i hear, but i can't find any in bulk here in gloucestershire. i generally wipe everything down once a month. i generally wipe wood down with a few coats of virgin olive oil, i does dry after a while. lanolin is good for horn grips. ballistol is good for steel, wood, leather but discolors brass. it's also edible. i've used paste waxes before but gravitate back to mineral oil.
naval jelly as above is nasty stuff, keep it at least a mile from any weapon. fine for eating the rust off 12" armour plate on a battleship, but has no place for anyone who posts here. do not flush down the drains either unless you want a big plumbing bill.... |
13th July 2008, 10:27 PM | #9 |
(deceased)
Join Date: Dec 2004
Location: East Coast USA
Posts: 3,191
|
Ok
On pamored keris I use mineral oil mixed with jasmine on wootz I also use mineral oil if you use waxes on wootz there is a danger that the wax could strip the finish. For all others with cleaned light patina blades I use Bri-wax. Jambiya=Briwax or Renaissance wax. Keris=mineral oil Axe with patina=Mineral oil Wood=Briwax or Kiwi neutral paste shoe poliish sometimes brown to touch up badly weathered wood. Horn=Renaissance wax or mineral oil very light coat wipe off after about 15-30 minutes. Ivory=mineral oil. In the winter apply once every 6-8 weeks. Last edited by LOUIEBLADES; 13th July 2008 at 10:41 PM. |
|
|