2nd September 2016, 11:20 PM | #1 |
Member
Join Date: Mar 2013
Posts: 40
|
Iron hide! One of a kind iron/ steel moro armor!
Ok guys wanred to share my newest aquisition to you! A full steel/iron moro armor! First time I've ever seen or heard one ever existed! Too bad it has been clean loosing the patina but impressive non the less. Weighs at 26.7 lbs. Have any of you guys come upon or heard of similar armor existing? Anyway thank you in advance for you opinions and enjoy! Ps underneath the upper shoulder plate I saw the original darkish rust patina I olso fold traces of carbon powder? Old casting?
|
3rd September 2016, 12:54 AM | #2 |
Vikingsword Staff
Join Date: Dec 2004
Location: The Aussie Bush
Posts: 4,194
|
Thanks for sharing the pics
Very interesting and thanks for sharing these pictures.
As you say, the armor has been thoroughly cleaned but shows relatively little pitting or damage from rust over the years. Unusually pristine and complete. How old do you think it may be? Must have been quite burdensome to fight in at that weight. |
3rd September 2016, 01:57 AM | #3 |
Vikingsword Staff
Join Date: Nov 2004
Posts: 6,290
|
I wonder if it might not be white brass rather than steel.
|
3rd September 2016, 04:36 AM | #4 |
Member
Join Date: Mar 2013
Posts: 40
|
I'm thinking early 20th century. I'm thinking it's has been kept well away from the elements thus the minimal pittings. Forgot to show the front so here it is. As being wHite brass possible but the plates rust, so do some of the ring. I really am not 100% sure of the composition of the metAL but looks steel to me.
|
3rd September 2016, 11:30 AM | #5 | ||
Member
Join Date: Jun 2012
Location: USA
Posts: 1,497
|
Quote:
Quote:
|
||
3rd September 2016, 12:53 PM | #6 | |
Vikingsword Staff
Join Date: Dec 2004
Location: The Aussie Bush
Posts: 4,194
|
estrch:
I am inclined to agree with your age assessment. The holes in the iron plates through which the chain mail is attached show no irregularity in shape as one would expect from corrosion over time--the holes are crisp circles. Also, the mail rings are remarkably uniform and free from corrosion. All this suggests recent manufacture to me. Ian Quote:
|
|
3rd September 2016, 02:57 PM | #7 |
Member
Join Date: Jun 2013
Posts: 1,229
|
Is it possible that this is an authentic piece that has been heavily cleaned ? I did notice that although the plates are rust free, there is evidence of substantial pitting in places.The brass or copper ornamentation is dual shaded.I have seen heavy chemical cleaning have this same effect on these metals.
I would also assume that if one wanted to create a forgery, it would be easier to bend brass rings rather than steel . I do acknowledge that making forgeries of Moro armor would certainly be tempting as they are very desirable and can go for hundreds if not thousands of dollars. |
3rd September 2016, 03:15 PM | #8 |
Member
Join Date: Dec 2013
Posts: 80
|
This is an intriguing example I came across some months ago, but Moro not being my an area of particular expertise I wasn't sure if it was truly Moro or not, especially with the iron construction.
|
4th September 2016, 03:46 AM | #9 | |
Member
Join Date: Jun 2012
Location: USA
Posts: 1,497
|
Quote:
|
|
6th September 2016, 11:32 PM | #10 |
Member
Join Date: Dec 2004
Location: California
Posts: 1,036
|
observations beg more questions
Looking at Bathala's Moro cuirass again, I'm wondering why some of the plates do look pristine whereas others are visibly pitted. And the pitting not consistent with corrosion, but rather impact-caused, with so many round dimples reminiscent of what a person could inflict using a ball peen hammer with blows of varying intensity. Çan't help but notice, also, that those chain-mail rings look like they were made of machine-drawn wire, way too "industrial" in appearance, and free of wear or any past corrosion. Isn't this a bit incongruous for an ethnographic object made by hand with rudimentary tools, in a damp tropical milieu in which ferrous alloys corrode readily over time?
|
7th September 2016, 09:52 AM | #11 |
Member
Join Date: Mar 2006
Location: Room 101, Glos. UK
Posts: 4,178
|
...and they appear to be butted rings.
biting the bullet to expose the elephant in the room, it looks very new. cool tho. |
7th September 2016, 09:59 AM | #12 | |
Member
Join Date: Jun 2012
Location: USA
Posts: 1,497
|
Quote:
|
|
7th September 2016, 11:14 AM | #13 |
Member
Join Date: Mar 2006
Location: Room 101, Glos. UK
Posts: 4,178
|
interesting. will remember that.
|
7th September 2016, 04:26 PM | #14 |
Member
Join Date: Apr 2014
Location: Louisiana
Posts: 363
|
The perfect consistency of the wire rings and identically round holes without wear on either component alone tell me that this is not very old.
But the "pitting" on the plates is hammered texture. Regardless of age, a fair amount of handwork went into putting this together. It just is not very old. |
7th September 2016, 09:52 PM | #15 |
Member
Join Date: Mar 2013
Posts: 40
|
I'm thinking early 20th century. I'm thinking it's has been kept well away from the elements thus the minimal pittings. Forgot to show the front so here it is. As being wHite brass possible but the plates rust, so do some of the ring. I really am not 100% sure of the composition of the metAL but looks steel to me.
|
8th September 2016, 03:09 AM | #16 |
EAAF Staff
Join Date: Dec 2004
Location: Louisville, KY
Posts: 7,217
|
I lean toward modern made to look more like Maranao style.
In addition to issues already made, I noticed that the decorations on the copper plates are in more Luzon style, not Moro. Also the catches are not traditional or correct for traditional Moro work. Great modern work though! |
8th September 2016, 05:00 AM | #17 |
Vikingsword Staff
Join Date: Dec 2004
Location: The Aussie Bush
Posts: 4,194
|
Bathala:
I think you are hearing consensus that this is an interesting, non-traditional set of Moro iron armor, with copper alloy (brass?) embellishments, that likely dates from the second half of the 20th C. Battara has pointed to features that might suggest multicultural (including non-Moro) input into its construction, and shakethetrees has given a good account of how the plates were likely made. Ian |
8th September 2016, 03:09 PM | #18 |
Member
Join Date: Mar 2013
Posts: 40
|
Thank you for you opinion!
I don't know why the last comment was repeated, but yes guy I must admit it's starting to be clear it's more modern than I thought but still great armor. Wondering what was the purpose of making it in steel rather than brass? It would have been way easier and more closer to its antique counterparts.
|
8th September 2016, 03:29 PM | #19 | |
Keris forum moderator
Join Date: Aug 2006
Location: Nova Scotia
Posts: 7,113
|
Quote:
|
|
8th September 2016, 06:17 PM | #20 | |
Member
Join Date: Jun 2012
Location: USA
Posts: 1,497
|
Quote:
Most Philippine citizens that I have met would have little to no knowledge of Philippine armor unless it was part of their personal culture. I do not think this was an attempt to fool anyone or the materials would have been different. They used whatever materials were available to them and brass was not readily available. I myself have had problems finding things in the Philippines that I could easily find from multiple sources were I live. |
|
10th September 2016, 03:58 PM | #21 | |
EAAF Staff
Join Date: Dec 2004
Location: Louisville, KY
Posts: 7,217
|
Quote:
Also, as I have said before, it seems that most of the antique weaponry was brought over the US. I have sold several things back to the Philippines from my collection over the years. |
|
|
|