![]() |
![]() |
#1 |
Lead Moderator European Armoury
Join Date: Dec 2004
Location: Portugal
Posts: 9,694
|
![]()
I assume i am not (yet) a cannon maniac, but rumours run out there in a way that a distinct member of this Forum spotted this fascinating example in a (Spanish) website and engaged in the whole process to acquire it and forward it to me.
I assume it is a great satisfaction to everyone when a piece holds marks, namely those of the maker; even if not identifiable, which sometimes is a question of time ... at least one always hopes so. This one has 15,5 cms length and a 19 mm calibre. Particular care was taken by the smith at finishing its rear end; faceted sides and an upper edge much more pronounced than the bottom, suggesting actual accomodation of the late to a stock bed ... i would say, within my expertize ![]() ![]() The marks are in an usual position and, as i said, i hope to see or hear about similar ones some day. The stock was first ordered for a small cannon i have acquired a few weeks ago, but i rushed to the carpenter to alter the measurements to fit this specific one, as i see it more invinting for an immediate stock project. The wood is kambala (the name alone excites me); the (crossbow type) shape is roughly based on the example from the Suhl Museum, posted in this forum by Michael. Now i will have to go to the smith to organize the barrel bands. I would feel rather comfortable with receiving your Gentlemen's opinnions ... either satisfactory or desillusive ![]() ![]() Fernando . |
![]() |
![]() |
![]() |
#2 |
Member
Join Date: Nov 2008
Location: Russia, Leningrad
Posts: 355
|
![]()
OOO! Looks great! I like short early handgonnes
![]() |
![]() |
![]() |
![]() |
#3 |
(deceased)
Join Date: Sep 2008
Location: Bavaria, Germany - the center of 15th and 16th century gunmaking
Posts: 4,310
|
![]()
Well done, Fernando,
The marks seem to me like a stylized (dotted) cross which is quite commonly found on 15th century short barrels. Best, Michael |
![]() |
![]() |
![]() |
#4 | |
Lead Moderator European Armoury
Join Date: Dec 2004
Location: Portugal
Posts: 9,694
|
![]() Quote:
![]() Fernando |
|
![]() |
![]() |
![]() |
#5 | ||
Lead Moderator European Armoury
Join Date: Dec 2004
Location: Portugal
Posts: 9,694
|
![]() Quote:
Quote:
![]() Thanks again Fernando |
||
![]() |
![]() |
![]() |
#6 |
Member
Join Date: Dec 2004
Location: California
Posts: 1,036
|
![]()
Congratulations, Fernando! Finding an example that is clearly marked is a bonus. I also like the way that the maker designed and made this thing with some thought as to the way it is supposed to fit securely into the stock. Looks great in the reproduction wood "tiller" that you had made -- some tool marks on the wood (see the two examples with stocks in Howard L. Blackmore's book), some stain and linseed oil rub to the surface, and a hammered iron barrel band or two and you're all set to go!
It's amazing that you have managed to snag several of these early gonnes in the Iberian peninsula within so short a time -- these weapons aren't exactly common. Keep up the good work! |
![]() |
![]() |
![]() |
#7 |
Arms Historian
Join Date: Dec 2004
Location: Route 66
Posts: 9,896
|
![]()
Fantastic piece Fernando! What great workmanship in recreating that stock also, looks perfect in it. You are really doing great in acquisitions my friend.
Michael, as always you know me and my curiosity on markings. Can you say more on the stylized cross, was it just on firearms, and was it typically used in Spain or in other European arms? Philip, its great to have you here!!! I always look forward to your input, and your scope of knowledge seems to have no bounds. All the best, Jim |
![]() |
![]() |
![]() |
#8 |
(deceased)
Join Date: Sep 2008
Location: Bavaria, Germany - the center of 15th and 16th century gunmaking
Posts: 4,310
|
![]()
Hi Jim,
By experience, and gainst the background of Christianity, I should say that the cross symbol has been quite common to a lot of European (including Portuguese and Spanish) ironwork and also to blades. One main reason may have been that the bearer was hoping to be protected from evil - either the gun exploding or an attacking enemy. In the South German and alpine regions it is often found as part of an orb and cross, as you will remember well from many blade marks. I have come to interpret this combination as a symbol of the Holy Roman Empire, both religious and political. I include images of two heavy Late Gothic wrought iron barrels in my collection, each ca. 35 cm long; one of them is struck with a group of three circles and illegible stylized letters (date?!) surmounted by a cross. The other shows a cudely incised cross symbol right before the raised brim of the touch hole moulding. Best, Michael Last edited by Matchlock; 30th June 2009 at 08:07 PM. |
![]() |
![]() |
![]() |
#9 |
Lead Moderator European Armoury
Join Date: Dec 2004
Location: Portugal
Posts: 9,694
|
![]()
Thank you for your kind words, Philip.
I have worked again on the wood, to make it look more rustic. I find linseed oil a bit sticky; i guess i will use the old traditional vieux chaine, as i did with the previous one. The smith is already booked for a session tomorrow , to make a couple hammered iron bands for the thing. Fernando |
![]() |
![]() |
![]() |
#10 |
Member
Join Date: Oct 2007
Posts: 1,592
|
![]()
Hi Fernando,
Can we see the plans for Castle V. your going to need it soon. ![]() My Regards, Norman. |
![]() |
![]() |
![]() |
#11 | |
Lead Moderator European Armoury
Join Date: Dec 2004
Location: Portugal
Posts: 9,694
|
![]()
Hi Jim,
Quote:
![]() ![]() ![]() ![]() ![]() Fernando |
|
![]() |
![]() |
![]() |
#12 | ||
Lead Moderator European Armoury
Join Date: Dec 2004
Location: Portugal
Posts: 9,694
|
![]()
Hi Michael, thank you for the input
![]() Quote:
![]() Quote:
That beats by far the humble mark in my example ![]() ![]() Fernando Last edited by fernando; 1st July 2009 at 01:54 PM. Reason: spell and addition |
||
![]() |
![]() |
![]() |
#13 | |
Lead Moderator European Armoury
Join Date: Dec 2004
Location: Portugal
Posts: 9,694
|
![]()
Hi Norman
Quote:
![]() The thing is i have a tolerant wife ... i mean, in what touches not minding me stuff the apartment walls and cabinets with my 'irons'. Fernando |
|
![]() |
![]() |
![]() |
#14 |
(deceased)
Join Date: Sep 2008
Location: Bavaria, Germany - the center of 15th and 16th century gunmaking
Posts: 4,310
|
![]()
Hi Fernando,
See? Best, Michael |
![]() |
![]() |
![]() |
#15 |
Lead Moderator European Armoury
Join Date: Dec 2004
Location: Portugal
Posts: 9,694
|
![]()
Thank you Michael,
I meant to say that i have discerned it in your post in this thread (#8), while not in previous threads. Fernando |
![]() |
![]() |
![]() |
#16 |
(deceased)
Join Date: Sep 2008
Location: Bavaria, Germany - the center of 15th and 16th century gunmaking
Posts: 4,310
|
![]()
Okay.
![]() m |
![]() |
![]() |
![]() |
#17 |
Member
Join Date: Jun 2008
Location: The Sharp end
Posts: 2,928
|
![]()
Hiya Nando!
You are a Cannon maniac! ![]() Another nice addition to the collection buddy! I don't know how you manage it? I think its about time you formed Fernando's 1st Militia Platoon. Regards Gene |
![]() |
![]() |
![]() |
#18 | |
Lead Moderator European Armoury
Join Date: Dec 2004
Location: Portugal
Posts: 9,694
|
![]()
Hi Gene, thank you...
Quote:
![]() Wait till i gather a whole batery, to atack a Brit position ![]() Just can't give you the date and coordinates, in order not to loose the surprise element ![]() Fernando |
|
![]() |
![]() |
![]() |
#19 |
Lead Moderator European Armoury
Join Date: Dec 2004
Location: Portugal
Posts: 9,694
|
![]()
Make way for the artillery
![]() As rough as i could manage. A detail i repute worthy of note ![]() Fernando . |
![]() |
![]() |
![]() |
#20 |
(deceased)
Join Date: Sep 2008
Location: Bavaria, Germany - the center of 15th and 16th century gunmaking
Posts: 4,310
|
![]()
Now that's one talented restorer!
![]() I like it, Fernando, I like it a lot! ![]() While I have come to accept and preserve fragments the way they are I have to admit that your solution adds a lot to a conception of how the complete piece would have looked like originally. Btw, would you consider reconstructing a breech loading cannon if you had an original breech? ![]() ![]() Michael |
![]() |
![]() |
![]() |
#21 | ||
Lead Moderator European Armoury
Join Date: Dec 2004
Location: Portugal
Posts: 9,694
|
![]()
Hi Michael,
Thanks a lot for your (too) kind words ![]() Quote:
Quote:
![]() ![]() ![]() Fernando |
||
![]() |
![]() |
![]() |
#22 | |
(deceased)
Join Date: Sep 2008
Location: Bavaria, Germany - the center of 15th and 16th century gunmaking
Posts: 4,310
|
![]() Quote:
![]() ![]() Best, m |
|
![]() |
![]() |
![]() |
Thread Tools | Search this Thread |
Display Modes | |
|
|