Keris handle

[David]

Originally Posted by Mickey the Finn

I'm glad you took the time to register here and ask for information. And there's a lot of valuable information available at this forum.

Many others have simply assumed that if anything is loose, it means that something is wrong with the assembly. They've then gone ahead and "fixed it"...with plenty of epoxy... Epoxy basically ruins the entire assembly. In any case, the hilt and ring can probably never be removed again without completely destroying them.

Keris hilts and the rings are not permanently attached; this is so that they can be adjusted, removed for cleaning, swapped out for different ones, upgraded, replaced if they get damaged, etc.

Yes and no to Mickey's response here.
Firstly sometimes keris handles do get fixed fast to the blade in a traditional manner. Usually when that is done a natural resin such as damar was used. Fortunately damar will release fairly easily by gently heating the blade. The resin softens and the pesi (tang) can then be removed and remaining resin can be cleaned out of the pesi hole in the hilt.
The same thing can be done if epoxy has been used, but removal will be more difficult. However i would not assume that the entire assembly has been ruined just because epoxy has been used. It will just take more time and patience. What will destroy your ensemble's dress is if you try to rush the process and force the hilt off.