Bedouin Sabre

[kronckew]

she arrived today. 5in. grip, 30in. blade 1 3/8 in. wide 3/16in. thick. slight distal taper to hatchet point. two fullers. balance point 10 in. in front of the grip. somewhat pointn heavy.

grip appears to be a dark wood or horn layered on a central slightly lighter/redder central layer. two steel rivets/pins hold it all together on the tang. brass band at front of grip is plain brass sheet, bunch of holes form a dot pattern on one side. sm. steel tack at top to pin it in place. appears there was a similar band at the hilt, also hole patterned on one side (you can see a 'ghost' color change where it once was). sm. tack that held it is still tere too.

blade forte is engraved with two fishes either side of a "4" figure, topped with the word EAGYPT and a leafed floral/star or flower pattern, both sides. (Eagypt appears to be the alternate generic eropean spelling to the english Egypt) looks like thism may have been a trade blade.

the wood scabbard is covered in what looks like thin goatskin that has had a central rib threaded thru it rather than sewn with a fibre or hair. see photo. the upper section is thicker brown leather sewn with wire helix much like turkish scabbards. see photo. a much better cover than the rest. the 'drag' is a whitish metal rather crudely crinkled and bashed into shape, soldered seam. the end is actually open, showing the wood end, almost like the metal wore off. the crumpled band joining the two different leather sections, as is the crumpled section separating the drag from the goatskin, is actually a wrap if goatskin things, i assume to anchor the missing baldric.

weight w/o scabbad 656 gm.(01.45 lb. or 23.14 oz.)