Omani barrel.

Pukka Bundook · 25th August 2015, 03:05 PM

Good morning Rick,

I believe Ibrahiim has shown pictures of some of these blown and shortened barrels, and the rear part has been turned into a short barrel of maybe 15 inches in length.
I think what Ibrahiim means by the first joint, is where the first ribbon of steel, (or the first tube, depending on how the barrel was constructed) is joined to the second barrel section.
This old manner of making barrels was often used in Spain, and was a very sound practice....they rarely blew apart in proof or afterwards.
The tubes were overlapped, and forge -welded in place.

If Ibrahiim could confirm this, it would help us see through this murky subject much better!
Re. breech-plugs;
In Manouchehr's very good articles on Persian arms in Classic Firearms, he says that in Persia, the screwed in breech-plug was not trusted, and that they much preferred a soldered(!) in plug, or one forge-welded in place.
I believe he also said that Western barrel imported into Persia, often had the threaded plug removed and one welded in instead. I think this will mean thet even though these Persian barrels have tangs, they will not normally be threaded in place.

Best wishes,
Richard.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

25th August 2015, 03:05 PM	#12
Pukka Bundook Member Join Date: Jan 2007 Posts: 803	Good morning Rick, I believe Ibrahiim has shown pictures of some of these blown and shortened barrels, and the rear part has been turned into a short barrel of maybe 15 inches in length. I think what Ibrahiim means by the first joint, is where the first ribbon of steel, (or the first tube, depending on how the barrel was constructed) is joined to the second barrel section. This old manner of making barrels was often used in Spain, and was a very sound practice....they rarely blew apart in proof or afterwards. The tubes were overlapped, and forge -welded in place. If Ibrahiim could confirm this, it would help us see through this murky subject much better! Re. breech-plugs; In Manouchehr's very good articles on Persian arms in Classic Firearms, he says that in Persia, the screwed in breech-plug was not trusted, and that they much preferred a soldered(!) in plug, or one forge-welded in place. I believe he also said that Western barrel imported into Persia, often had the threaded plug removed and one welded in instead. I think this will mean thet even though these Persian barrels have tangs, they will not normally be threaded in place. Best wishes, Richard.