Kubur Questions

[Kubur]

Ok, it's just an abstract of what I read.
Ulcinj was a town to the South of Montenegro and an Albanian centre of pistols production. The town had trade links with Egypt and Tunisia.
Albanesi traders and merceneries worked notably with egypt, Tunisa and Algeria
and participated to the diffusion of Balkans arms in the Ottoman empire.
Ulcinj was also an haven for corsairs from North Africa.
They decorated their gun barrels with animal and humans figures, they even engraved their Italians gun locks from Brescia with figures.
This decoration was made to please the taste of North Africans and mixed populations of Albanians living in Africa.
Reference: Elgood, Arms of Greece, mainly p. 39-40
I think this information is useful not only for your gun, but also to understand the spread of Ottoman arms in North Africa...

[Rick]

Marvelous, and I thank you Kubur .
Since the only other arm that came down to us from him was a 'Wedding Nimcha' ; I would think that this places it as being acquired in Algeria or Morocco .
Now I'll have to get the courage to remove the lock and look for marks .

[rickystl]

Originally Posted by Rick

Marvelous, and I thank you Kubur .
Since the only other arm that came down to us from him was a 'Wedding Nimcha' ; I would think that this places it as being acquired in Algeria or Morocco .
Now I'll have to get the courage to remove the lock and look for marks .

Hi Rick.
What a beautiful - and interesting pistol. At first glance, the overall proportions of the gun look just like a typical Ottoman/Balkan made kubur pistol. The lock style, butt cap, trigger guard, etc. But Kubur, above, is probably correct. The last time I saw the facial impression on the breech of a barrel was on a Greek/Rasak long gun. The Greeks were also fond of making their triggers in the form of humans. Most of the relief chiseling on the barrels that I've seen were on Ottomah/Balkan guns, but done in a more generic matter such as the barrel on the Ottoman Knee Pistol below.
If you have a chance, would you run a piece of wire or something down the ramrod channel and see if the hole goes all the way back towards the breech? Or does the wire travel only a couple inches past the lowere ramrod thimble? It would be interesting to know since it looks like it was made for a full length ramrod vs a false ramrod. Thanks.
Rick.

[Rick]

Thank you for the information Rick .
Just checked the ramrod depth; it's false .
Can you make anything out of the stamp under the barrel ?
Were these barrels sourced from the area of manufacture; or imported and embellished ?
Another question; this pistol has never had a barrel band; what was the barrel seated in to keep it in the stock ?

[rickystl]

Originally Posted by Rick

Thank you for the information Rick .
Just checked the ramrod depth; it's false .
Can you make anything out of the stamp under the barrel ?
Were these barrels sourced from the area of manufacture; or imported and embellished ?
Another question; this pistol has never had a barrel band; what was the barrel seated in to keep it in the stock ?

Hi Rick. Finally back to this Thread.
1) OK. False ramrod. More evidence of being locally made/assembled. The lock also looks locally made.
2) Unfortunately, "markings" are not one of my strong suites. But it does look like the numeral 4 from the photos, and does look like a stamp. But the proposed broad arrow doesn't appear to be a stamp (?). Looks more like a cut or engraving. The same with the two straight marks just ahead of the arrow. I've never seen one of these pistols with an English proof. Unless Afghan made. Seen Belgium, Italian, and even one German marked barrel, and of course locally made barrels. But not English. Or at least any proofs.
The other stamp, that looks locally done, I have no idea.
3) The barrels, locks, and some hardware were both locally made and imported. There were even complete guns, European made, and decorated for local tastes, and exported for re-sale. That's also why these pistols are often mis-identified as Italian, Dutch, or something else. So the combination/mix of parts all over the map you might say. LOL
4) Most of these pistols had one or more barrel bands. Your's may have had a single barrel band at the muzzle end with a groove on the lower part to accomodate the rod. But check the bottom of the barrel for any evidence that there may have been one or two underlugs that would have been soldered to the barrel, or a small square, shallow cut in the barrel to accomodate one or more pins. In other words, the barrel may have originally been pin fastend, but the underlugs that held the pins are now gone. Is there one or more small holes in the stock where a barrel pin(s) might have once been?
Rick.

[Rick]

Hi Rick,
Thanks for your further comments on this piece .
I can find no evidence of remains of any kind of pin under the barrel or where it lies (smooth with some old rust) but I do see some faint marks on the stock about an inch and a half in from the business end, though they look a bit like impressions made by wire possibly . That being said there is no change in the patina of the wood; this pistol has been in my family's possession for probably 125 years so if it (the barrel band) was lost earlier that could account, I guess for the uniformity of the patina .

I want to thank you all for your help with this pistol .

Rick

[rickystl]

Hi Rick.
Brass or Silver wire was another common method of securing the barrel. Probably came off a long time ago.
Yes, it looks like you were able to secure a pretty close ID for your pistol. GREAT! It was a fun Thread.
Rick.