![]() |
![]() |
#1 |
Member
Join Date: Oct 2010
Posts: 22
|
![]()
What about this helmet?
Here is the description and the measures. Period: 13th century Perhaps from teutonic area It's made with three elements. Two bands of bent sheet metal ring and a bell-shaped upper dome-shaped cone with edges folded down to form a cylinder. The three elements are joined together with rivets of iron loops, clinched so as not to create external protrusions. The upper cap surmounts 9 to 12 mm for the upper edge of the intermediate band. The two pieces are combined with 6 rivets. The distances between the rivets are not regular. The lower edge of the intermediate band for about 16 mm overlaps the upper edge of the lower band. These two pieces are joined together by 8 rivets. Even for these rivets are not regular distances between each other The ends of both bands overlaps and are fixed with rivets. All edges of the joint are shaped so that the outer surface of the helmet has no discontinuities or protrusions. Within the lower band, about 84 mm from the edge, there were 20 rings of iron, placed at irregular distances from each other. Two of them are still together a chain mail, to prove that at these rings was fixed a camaglio. The hat-in-arms (?) of the Museum Fioroni has’nt slits for eyes because, for the low point of connection with the camaglio, the bottom edge of the helmet is placed above the eyebrows. Measures Total height 267 mm Base diameter 344 mm Top Base diameter 193 mm approximately top diameter About 185 mm Height of cylindrical portion About 25 mm Summit of cone 20 mm from the base. Intermediate band Base diameter 236 mm approximately External height: 95 mm approx Lower band Base diameter 344 mm approximately External Height: 127 mm approximately Positioning the inner rings 84 mm from lower edge Fixing ring for camaglio (2) Internal diameter 4 mm Outer diameter 9.3 mm Thickness 4.5 mm NOTES 1) The construction technique - forged elements, joined together with rivets –(not welded) is similar to that adopted in the contemporary Pot Helmets. 2) The 20 rings were fixed to camaglio inserted in through holes in the metal band and secured it with the system of the rivet replied. Three of them are intact. 9 of them has only the rivet securing at the metal band. 8 of them are completely missing; There mounting hole was inappropriately closed with a plastic material during the restoration. Condition. The outer surfaces, highly corroded, have been properly and thoroughly deoxidized. The use of excessively abrasive tools is evident only on the protruding rivets. Less responsible for the restoration of the interior surfaces. All surfaces are protected with acrylic film Such protection is still effective and requires no rework. The restoration has been pushed to the reconstruction of some missing parts with plastic material. Best Regards Cesare |
![]() |
![]() |
|
|