Riau-Bugis Keris and Hilt?

A. G. Maisey · 11th October 2011, 01:41 PM

Yes, if that is your preference, it will give the result you want, however, ask yourself if you would use no more than a soft cloth on a fine piano, or a fine piece of antique furniture with a french polish.

You might find that rotten stone will be kinder to a Javanese finish than car polish; in Jawa the layers of polish are intentionally kept thin, in order to permit the grain to be seen better --- there is nothing like the traditional piano finish in Jawa. This means that unless one is extremely careful it is quite easy to cut through the usual Javanese polish. The rotten stone I mentioned is something that was used by traditional polishers in the past, I think that these days when a polisher wants a matt finish, he will usually opt for 0000 steel wool, very lightly brushed in one direction with the grain, and most often used damp with a little soap.

Furniture oils such as Sheraton, and furniture waxes such as Antiquax have been formulated to protect and preserve the finish on fine furniture. I personally feel that a finely polished warangka deserves at least the same consideration.

However, we all have our own preferences.

A quick , easy way to refinish an old warangka is to use Danish oil, or a gunstock finish like Birchwood Casey Trueoil. The use of these types of finish requires virtually no skill at all, and it is easy to produce any level of gloss that you wish.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

11th October 2011, 01:41 PM	#16
A. G. Maisey Member Join Date: May 2006 Posts: 6,991	Yes, if that is your preference, it will give the result you want, however, ask yourself if you would use no more than a soft cloth on a fine piano, or a fine piece of antique furniture with a french polish. You might find that rotten stone will be kinder to a Javanese finish than car polish; in Jawa the layers of polish are intentionally kept thin, in order to permit the grain to be seen better --- there is nothing like the traditional piano finish in Jawa. This means that unless one is extremely careful it is quite easy to cut through the usual Javanese polish. The rotten stone I mentioned is something that was used by traditional polishers in the past, I think that these days when a polisher wants a matt finish, he will usually opt for 0000 steel wool, very lightly brushed in one direction with the grain, and most often used damp with a little soap. Furniture oils such as Sheraton, and furniture waxes such as Antiquax have been formulated to protect and preserve the finish on fine furniture. I personally feel that a finely polished warangka deserves at least the same consideration. However, we all have our own preferences. A quick , easy way to refinish an old warangka is to use Danish oil, or a gunstock finish like Birchwood Casey Trueoil. The use of these types of finish requires virtually no skill at all, and it is easy to produce any level of gloss that you wish.