![]() |
|
![]() |
|
Thread Tools | Search this Thread | Display Modes |
![]() |
#1 |
Member
Join Date: Jan 2022
Location: Netherlands
Posts: 448
|
![]()
while I was researching the coffee etching method I came across a few videos by this avid video maker on youtube who publishes many things about krises
Since they are English spoken they may interest this community since the most videos are in various Indonesian languages https://www.youtube.com/watch?v=XFsWsknkXBQ https://www.youtube.com/watch?v=FEaCmSYJ3J0 https://www.youtube.com/watch?v=nS6P10f7sAc https://www.youtube.com/watch?v=OJU-n_oDKdQ one more addition https://www.youtube.com/watch?v=QSKxKnABqsY Last edited by milandro; 20th March 2022 at 03:54 PM. |
![]() |
![]() |
![]() |
#2 |
Keris forum moderator
Join Date: Aug 2006
Location: Nova Scotia
Posts: 7,089
|
![]()
I don't know about this guy. FIVE videos and he is just getting his lime juice strained. He needs to edit better and combine these into a single video.
I would be curious to hear more about aging the lime juice for this process though. I had never heard it suggested that the lime needs to fermented for more than month before combining the realgar to create the warangan. Is this how you do it Alan? |
![]() |
![]() |
![]() |
#3 |
Member
Join Date: May 2006
Posts: 6,823
|
![]()
Let's say that it is not the way I do it, David.
The first warangan job I did was picked up from a book written by one of the old British colonials in Malaya, who had observed the process. Then I observed a man in Jogja then a number of people in Solo, then I was taught, hands on by Mpu Suparman. The Malay method was completely different to the Javanese methods, all of which varies a little bit but are essentially the same. Currently I use several different methods, but they are all similar. I use warangan from Jawa when I can get stuff of decent quality, it can vary in quality a lot. I prefer to use laboratory quality arsenic, I DO NOT RECOMMEND THAT anybody who has not been professionally trained in the handling of arsenic should consider using it. Everybody I know uses freshly squeezed tahitian lime juice that has been strained. |
![]() |
![]() |
![]() |
#4 |
Vikingsword Staff
Join Date: Nov 2004
Posts: 6,285
|
![]()
Why Tahitian limes, Alan?
More acidic? |
![]() |
![]() |
![]() |
#5 | |
Keris forum moderator
Join Date: Aug 2006
Location: Nova Scotia
Posts: 7,089
|
![]() Quote:
|
|
![]() |
![]() |
![]() |
#6 |
Member
Join Date: Jan 2022
Location: Netherlands
Posts: 448
|
![]() |
![]() |
![]() |
![]() |
#7 |
Member
Join Date: May 2006
Posts: 6,823
|
![]()
Entertaining.
I'll bet Harry Potter would be a real dab hand at this sort of thing. |
![]() |
![]() |
![]() |
#8 |
Member
Join Date: Jan 2018
Location: Sydney, Australia
Posts: 280
|
![]()
One of his steps is to add 100ml babon to "catalyse the reaction".
What is babon? Google isn't giving me any leads. |
![]() |
![]() |
![]() |
#9 | |
Member
Join Date: Jan 2022
Location: Netherlands
Posts: 448
|
![]() Quote:
apparently it is possible to acquire it https://www.bukalapak.com/p/hobi-kol...warangan-keris |
|
![]() |
![]() |
![]() |
#10 |
Member
Join Date: Jan 2018
Location: Sydney, Australia
Posts: 280
|
![]()
Ah I see, thanks Milandro.
This method seems very... elaborate. |
![]() |
![]() |
![]() |
#11 |
Member
Join Date: Jan 2022
Location: Netherlands
Posts: 448
|
![]()
It would be very nice that someone would make a video comparing the etching of a kris blad with the sulphur method to a warangan
I don’t have any personal experience with any method but these seem to be the only videos available in English which give any information on the process. Since there are many questions about etching blades I thought of posting it here. There are, probably, many ways to do this and I understand from the person whom etches my blades (not connected to the author of the video) that there are different formulations and that they are used for different metals too. Most people's perspective would change if one may be able to compare this to more (or even less I suspect) orthodox videos in local languages https://www.youtube.com/watch?v=y8XHSy1JcM4&t=423s this (without any words) seems to promote some particular product https://www.youtube.com/watch?v=nNyQCIeHxYM this for example explains (apparently) how to overcome the problems from a faded warangan... unfortunately it is is incomprehensible to me Last edited by milandro; 11th April 2022 at 12:48 PM. |
![]() |
![]() |
![]() |
#12 | |
Member
Join Date: Mar 2018
Posts: 459
|
![]() Quote:
Hmmm, I assume he is doing it in the Malay way of warangan? Anyway, I have tried to do warangan myself before and it was very hard. I even seek consultation with someone who was trained by a local Javanese on the art of warangan. It is not so straightforward with many preparation needs to be done in order for the blade to be warangan properly and nowadays people using the soak method which yields faster result. And fyi, most of the youtube videos will not show you the trade or complete procedure. Afterall, those smiths will be out of business if everyone can does a simple warangan job on their keris correctly. |
|
![]() |
![]() |
![]() |
#13 |
Member
Join Date: Jan 2022
Location: Netherlands
Posts: 448
|
![]()
I don’t have a horse in this race.
I am merely showing what I find on line since this is something that many people find interesting and obviously talk about and have done so for a long time. Some people told me that years ago they were sending blades to Indonesia to have them etched but this option, due to the shipping costs and the introduction of various taxes or regulations has become either very impractical or extremely costly. I realize that many people have taken to wash blades in recent times out of sheer necessity since they had no access to people whom would etch or simply restore blades I have no intention of doing this myself and I completely trust the person that does this for me. But if someone feels inclined to experiment in the art of etching I think it would be best if these videos were part of the material to study. The business practice of someone in Indonesia or in Malaysia are not in danger at all since there is little that someone from Europe (for example) would ship a blade to Indonesia and pay the shipping plus taxes (even if the blade was yours to start with unless you pay for the extremely costly. |
![]() |
![]() |
![]() |
#14 |
Member
Join Date: May 2006
Posts: 6,823
|
![]()
Actually, in Javanese, a "babon" is a hen (ie, chicken, chook) that has laid eggs. I think it can also be used to refer to any female animal that has reproduced, but I'm not sure about this.
But it definitely is a laying hen. All this alchemy is totally, absolutely, completely different to what I have seen in Jawa, & what I use myself. The first time I saw a Javanese gentleman doing blade staining, he started cold, he had nothing ready at all, I had three or four dirty, rusty blades and I had 4 hours or so before my train left Jogja. The m'ranggi sent one of his kids to the market to buy some limes, a couple of brushes & some warangan. When the required materials arrived the m'ranggi crushed the warangan in his wife's kitchen mortar --- the same one she used to prepare food --- but he lined it first with a bit of plastic, he did not bother to cover the pestle with plastic though. He juiced the limes, strained them, then brushed the lime juice onto the blades repeatedly for around half an hour & removed as much rust & filth as he could, it was not a perfect job, but he had limited time. Before he started the cleaning he had already mixed the powdered warangan with some lime juice --- about as much powder as would cover a man's thumb nail, and about two egg-cups of lime juice, the result was a suspension, not a mixture. He repeatedly brushed the suspension of warangan & lime juice into both sides of the blades, as the blade colour came up, he would rinse off the warangan, pat dry with a cloth and lay the blades in the sun until thoroughly dry. This process was repeated a number of times until I had to leave to catch my train. The blades were passably stained and the m'ranggi told me --- through an interpreter, I could not speak BI or Javanese back then --- that I should repeat what I saw him do in about 12 months, and keep doing it from time to time until the job was perfect. The man who did this was the abdi dalem who was responsible for the maintenance of the Sultan of Ngayogyakarta's pusakas. That was more than 50 years ago. Since then I have seen a lot of people stain blades, and I've stained more than a few myself. The basic process is the same as I have just outlined. Commercial warangan jobs are done differently, and generally speaking these commercial jobs do use a soak method and the stain produced is vastly inferior to the process I have just described. |
![]() |
![]() |
![]() |
#15 | |
Member
Join Date: Mar 2018
Posts: 459
|
![]() Quote:
This process was repeated a number of times until I had to leave to catch my train. The blades were passably stained and the m'ranggi told me --- through an interpreter, I could not speak BI or Javanese back then --- that I should repeat what I saw him do in about 12 months, and keep doing it from time to time until the job was perfect. OMG! It is for sure a tedious process. I didn't know they actually have to do it many a times until it yields good results on the bilah. Me and my itchy hand, after watching youtube videos; thinking I can also do it. And eventually end up having 2 good keris without warangan on the bilah. If only I could turn back the clock. I learnt the lesson a hard way was that leave it to the professional. There are many clowns doing video, passing off as experts in the internet world. Recently I also tried to repair my violin bow tip BUT after speaking to Alan and also a good pal who is good with his hand, I decided otherwise and send to a luthier to fix it, spend $, yes but at least the item came back properly fixed. |
|
![]() |
![]() |
![]() |
#16 |
Member
Join Date: May 2006
Posts: 6,823
|
![]()
Not always as tedious as my description sounds Anthony. Sometimes you can get a passably decent stain on an old blade with vinegar and a bit of brushing.
On the other hand, this keris is one that I made, to get a decent stain on this it took me two full days, most of the time working in full sun in the middle of summer. |
![]() |
![]() |
![]() |
#17 | |
Member
Join Date: Jan 2022
Location: Netherlands
Posts: 448
|
![]() Quote:
among many also a video on a Paket Komplit ( complete package I assume) https://www.youtube.com/watch?v=OcqFXU4CVLk please look at this video ( for people who understand the language) he mentions the ward babon in the title. Last edited by milandro; 12th April 2022 at 08:23 AM. |
|
![]() |
![]() |
![]() |
#18 |
Keris forum moderator
Join Date: Aug 2006
Location: Nova Scotia
Posts: 7,089
|
![]()
I have done the warangan process a few times on some of my keris with varying results.While i am sure a professional would do a much better job i just did not find it practical to send any of my keris abroad for staining as well as the worry about loss or theft along the way when sending the blade numerous times over great distances to foreign countries. I was fortunate to be able to obtain some lab grade arsenic trioxide some years back and though i have never had any training in handling such material as Alan suggests i treated it with the utmost respect and care and believe i handled it all pretty safely.
I used the brush on method that was described by Alan on this forum some time ago. I have learned a few things since that i believe might make the procedure even more successful the next time i try it, but i suppose that remains to be seen until i make the next attempt. But while it is a slow and perhaps tedious process to go from a rusty dull blade to something that presents good colour and pamor i don't think it is difficult to be able to at least improve upon the appearance of a keris if you follow simple directions. I do find the videos presented by Milandro to be rather drawn out and overly complicated using methods which seem unnecessary from what i have seen and experienced. Here is a Bali keris that i stained about 13 years ago. When i found the blade it was not in the best of shape. It had lived in a store window of a curio shop in South Orange, New Jersey for some time and was covered in a thin layer of active rust. The first group of photos shows the keris after i cleaned the rust off with a soak in pineapple juice and regular scrubbings for a couple of days and then gave it a warangan treatment. I must admit that i did not use Tahitian limes, but rather whatever regular limes were available at the supermarket. As described before, i used lab grade arsenic trioxide to make the warangan. As you can see, my first treatment was weak at best. It was certainly an improvement over the original condition (sorry, i didn't take any before photos) and revealed the pamor pattern, but it was not satisfactory for me. The second set of photos (sorry for the quick and poor cellphone pics as i did not photograph this at the time and just made these now for this post) shows my results from may second attempt on this blade done soon after the first. It is still far from perfect, but i decided not to make another go at it and to live with it as is. The stain seems to have help up well over the more than a dozen years since it was applied. I do have a few blades i have been wanting to attend to for some time and maybe i will get around to them this year as the weather improves. If i do i will be sure to document the process for thoroughly. ![]() |
![]() |
![]() |
![]() |
#19 |
Member
Join Date: May 2006
Posts: 6,823
|
![]()
You probably did use Tahitian limes David, I don't know of any other kind, I only know of different names for the same kind of limes.
I guess that maybe there are a lot of different kinds of limes, but what I see available where I live are just sold as "limes". Those "just limes" are the same as what we use in Jawa where they are called "jeruk pecel", which I was told years ago by a gardener were the same as "Tahitian limes". They work in waranagan the same way, that I do know. In my descriptions I've always used the term "Tahitian lime" in order to make very clear that we cannot use lemon, because I have seen mention of lemons used for blade staining, and in my experience lemon simply does not work well at all, it makes the blade far too dark, far too quickly. There is another kind of lime that is common & that we cannot use for staining:- jeruk perut, only the leaves of this are useful, they get used in cooking. I think jeruk perut is called "kaffir lime" in English. |
![]() |
![]() |
![]() |
#20 |
Member
Join Date: May 2006
Posts: 6,823
|
![]()
Thanks for mention of dictionary meanings Milandro. I use dictionaries all the time, but only when I'm doubtful about something, with "babon", the word is BI as well as Javanese, and when I mentioned laying hens I was thinking BI, but your mention of dictionary meanings has prompted me to check the Javanese dictionary too.
What I found is that in Javanese "babon" has a much wider application that in BI, and maybe this makes use of the word associated with a warangan mix a bit more intelligible. From Robson & Wibisono:- 1 a female animal mate; animal that has reproduced, esp. a hen; mother hen (see also babu); babon angrem - a batik pattern. 2 manuscript, original (also an alternate meaning in BI) 3 capital (to be invested) if we go to the Balai Bahasa publication, which is the best Javanese dictionary of which I have knowledge, we find an even wider application of the word. This dictionary is a Javanese dictionary for use by Javanese people, so the entries are in Basa Jawa. |
![]() |
![]() |
![]() |
#21 | |
Member
Join Date: Mar 2018
Posts: 459
|
![]() Quote:
|
|
![]() |
![]() |
![]() |
#22 |
Member
Join Date: Jan 2022
Location: Netherlands
Posts: 448
|
![]()
Cheers Alan aside from the dictionary meaning, the fact that searching for the word Babon together with warangan on google returns a large number of hits all to do with products meant to stain blades looking the same must mean that Babon refers to this kind of thing in whatever way. If you search babon warangan for images it will only show this kind of products
this is a screen shot of the search for images |
![]() |
![]() |
![]() |
#23 |
Member
Join Date: May 2006
Posts: 6,823
|
![]()
Thanks Milandro, but I don't use google searches much where keris are concerned, I much prefer to rely on my own experience.
I use google for things i might want to buy, or for quick possible answers on things I don't know, or for things to do with travel --- hasn't been much of that lately. All this stuff that relates to mixtures & etc for warangan looks to me like preparation of the stuff used for commercial staining of large numbers of blades, it is very definitely not in the smallest degree relative to the type staining I've seen done, or that I have done myself or that I have taught to other people. My interest in the use of the word "babon" in a context that I have not seen nor heard previously is more to do with enquiry into language rather than enquiry into these warangan mixes. |
![]() |
![]() |
![]() |
#24 |
Member
Join Date: Jan 2022
Location: Netherlands
Posts: 448
|
![]()
It, was just to show that a number of people use the word babon in a warangan context.
Also in the last link to the video above (I will repeat here) there is a video where this guy mentions babon in the tile and shows it during the video, sicne you understand the language it may clarify the use of the word. “ Cara Membuat Larutan Warangan dengan Babon” https://www.youtube.com/watch?v=OcqFXU4CVLk |
![]() |
![]() |
![]() |
#25 |
Member
Join Date: May 2006
Posts: 6,823
|
![]()
I believe i understand the relationship between the warangan solution & the word "babon" now.
The "babon" relates to the idea of beginning a reaction, just as a hen begins life by laying an egg. The word "bibit" means seed, or origin, or beginning, and that word is there somewhere too. so "babon" & "bibit" both relate in general terms to the idea of origin, just as a hen originates a beginning by the laying of a an egg that will produce a chicken. The reference attached to babon is one of origin, the beinning of something, and in this context that makes sense. I find that it helps me to understand something, both in English, and in other languages if I can understand the relationships between ideas and words, not just pick up a word and use it without some sort of understanding of the net of ideas that drive the word. As I have said, my interest was in use of the word, rather than in the substance that the word referred to. As for videos, well, they need to be really good to convince me to spend any of my very limited time in watching them. I've never been able to get through a complete keris related video, best I can usually manage is a few minutes. If it was 70 or so years ago, and I was just beginning to find my feet with the keris, it would probably be quite different, I'd probably spend hours looking for all the keris related videos I could find, but the problem for me is that there is so much misinformation, misunderstanding and just plain bovine excreta on the net that relates to keris, I get turned off very, very quickly. With keris, I got out of kindergarten a very long time ago. |
![]() |
![]() |
![]() |
#26 | |
Member
Join Date: Jan 2018
Location: Sydney, Australia
Posts: 280
|
![]() Quote:
There is also this blade that I stained using the sulphur, salt and rice water method. You may use this method and result to compare. A hypothesis has been made on the latter post that the sulphur stain method may yield a better result on blades which have been stained with arsenic in the past, compared to those that have never been stained with arsenic before. |
|
![]() |
![]() |
![]() |
#27 | |
Member
Join Date: Jan 2022
Location: Netherlands
Posts: 448
|
![]() Quote:
I will certainly give the Sulphur method a go since it seems to be certainly way less complex than the warangan method and the results are very good (as shown form you very useful post). since you’ve done that with success. I was wandering what the exact function of rice water is? Is it just to form a gelatinous support to incorporate a sort of suspension of salt and sulphur and adhere to the blade? I will certainly have a go using your formula and method. I have just the right candidate although I don’t know how good a pamor there is (not much is showing at the moment) . If this works I may apply also to some other blades that I have or may have in future. Thank you very much! |
|
![]() |
![]() |
![]() |
#28 | |
Keris forum moderator
Join Date: Aug 2006
Location: Nova Scotia
Posts: 7,089
|
![]() Quote:
|
|
![]() |
![]() |
![]() |
#29 |
Member
Join Date: May 2006
Posts: 6,823
|
![]()
I agree with your understanding David.
But what can be read from a properly stained blade goes further than just the characteristics of the iron. Once the blade has been stained we can also determine the characteristics of the pamor and the way in which it has been worked. Additionally we can identify the existence & extent of the heat treatment (sepuhan). More than this, we can also fairly easily identify any repairs that might have been carried out on the blade during its life. |
![]() |
![]() |
![]() |
#30 |
Member
Join Date: Feb 2014
Posts: 424
|
![]()
Has anyone considered or actually used antimony trioxide in place of arsenic trioxide for the purpose of staining keris?
From what I can cursorily discover, it is considerably less toxic than the arsenic compound, though of course not without risk. |
![]() |
![]() |
![]() |
|
|