Interesting Barong for Comment.

drac2k · 8th January 2019, 08:34 PM

I recently picked this up at auction. It has a nice blade with the reoccurring centipede motif with a silver ferrule, however, I'm not too sure of the metal wrap on the handle. Is this a more recent addition?
Any comments would be appreciated.

kai · 8th January 2019, 10:50 PM

Hello Drac,

Very nice blade!

Quote:

I'm not too sure of the metal wrap on the handle. Is this a more recent addition?

I'd guess that the brass rings replaced twisted silver wire that may have got lost/torn: Genuine rings can have geometric motifs, too, and even quite simple ones at that - however, these usually alternate with bindings to achieve a reasonable grip.

From the pics, the surface finish of the wood seems to be a bit uneven (aside from the chipped areas). If this is real, I also would consider the possibility that the pommel might be a later replacement (also the wood choice is unusual for an high-end example); very sound craftsmanship though, likely not recent work (possibly at the same time as the scabbard?). Any worn surfaces?

Regards,
Kai

drac2k · 8th January 2019, 11:28 PM

Thanks Kai.
Those possibilities also came to my mind; that is why I feel that the blade and the silver ferrule are original and the other components could be later add-ons or modifications. The metal fits almost seamlessly and I think that your point that there may have been some bindings at the junctions is very reasonable.
In my limited experience, I haven't seen that type of pattern on the sheeting covering the handle. The handle was very dark before I cleaned it with silver polish.
What areas did you want to know if it was "worn?'

Battara · 9th January 2019, 01:35 AM

I agree that the brass parts are recent as well as the pommel. The style of carving and the mother-of-pearl inlays indicate this. However, I also agree that the blade and the silver parts are original. Also the scabbard is newer in style.

Part of the problem is that no one in the Philippines can do the same weaving in silver wire as their ancestors anymore.

Regarding the silver inlay, centipedes found in the Philippines (and the region) are huge and very poisonous. Great talisman to make the weapon lethal (and the owner protected?)

Congratulations!

drac2k · 9th January 2019, 01:53 AM

Thanks for the imput.

kino · 9th January 2019, 02:49 PM

Congrats on a nice win.
The insets seems to be mother of pearl, I wonder if these are replacements or a sign of the pommels age. Usually on the older pieces, they're bone, some Ivory, but mother of pearl, rarely. The fit of the insets might also be a clue of its age.

Nice blade. I also have a Barung with a similar centipede inlaid blade.
Thanks for sharing.

kai · 9th January 2019, 03:35 PM

I'm with Albert on this one: This type of hilt may exhibit MOP inlay and still date from the second half of the 19th century. Here's a pic of what I believe to be a genuinely old example with original MOP inlay (both extensions of the pommel have been repaired though).

Regards,
Kai

kai · 9th January 2019, 03:51 PM

Hello Drac,

Quote:

The handle was very dark before I cleaned it with silver polish.

Also the wooden pommel? The repair will date back some time (perhaps to the WW2 period?) - this craftsmanship is hardly seen anymore today.

Quote:

What areas did you want to know if it was "worn?'

Tough call - basically all those surfaces (and, especially, exposed tips, etc.) that gets rubbed during regular wear and handling.

Your pommel is apparently made from a single piece of hardwood while the selection seems to reflect later preference/availability. The uneven surface finish of the main pommel vs. the extensions seems quite odd (except for the chipped areas, of course).

Regards,
Kai

Spunjer · 9th January 2019, 07:37 PM

Hello Drac. nice catch! you beat me by literally half a second, lol
regarding the barung, i have the privilege of handling this before the auction. nothing in this particular barung says that it was a later piece; it's just that it was well taken cared off. i don't think the pommel was a later replacement either.
as far as the brass rings; it's not a common method but i noticed these are more prevalent on wood junggayans similar to this. here is another example with brass/silver ferrule on a wooded junggayan. my thinking on this is the original owner wanted a prestigious looking handle but ol' dude is on McDonalds budget. ok, maybe Bob Evans.

kai · 9th January 2019, 09:58 PM

Hello Ron,

Quote:

i have the privilege of handling this before the auction. nothing in this particular barung says that it was a later piece; it's just that it was well taken cared off. i don't think the pommel was a later replacement either.

Thanks for your observations! Did you note wear commensurate with estimated age?

Quote:

as far as the brass rings; it's not a common method but i noticed these are more prevalent on wood junggayans similar to this. here is another example with brass/silver ferrule on a wooded junggayan.

Very nice grouping! And that scabbard looks much more convincing!

Any feelings about inlay that got just glued? Appears to be quite common - however, any tendencies/trends?

Regards,
Kai

drac2k · 9th January 2019, 11:12 PM

Once again gentlemen, thanks for all of the valuable input!
Kai, I cleaned the pommel with an oil solution; I rubbed the surface with a clean cloth and the polish. I am wondering as to what you think of as being an uneven surface on the side and top of the pommel; it is in fact the grain of the wood.
Spunjer, first, you have some great pieces! Secondly, I know what you mean; I sat through the auction for hours(at home), totally frustrated, unable to get anything, either being the underbidder or getting totally blown away price-wise. The only reason why I think I got this was that it was at the end of the auction and everyone else either went home, ran out of money or fell asleep!
The pictures weren't very good. Did you see the panabas and was it as nice as it looked?

Spunjer · 10th January 2019, 10:25 PM

Kai,
quite frankly, i didn't paid that much attention at the inlays; i was more enamored with the naga on the blade. overall, i thought it was pretty consistent with barungs during the first quarter of the 20th century
drac2k,
thanks! unfortunately, a few of those are no longer a part of my collection.
as far as the barung, i really thought i won that, haha. only after i got my summary did i found out i didn't.
the panabas was another piece i had my sight on. it was a beauty! again, the main reason why i wanted the panabas was because of the naga on the blade. and yes, unfortunately it went too rich for my blood, lol

drac2k · 11th January 2019, 04:11 AM

There were so many items at that auction that I thought I might get and was unable to and this one I didn't think I had a chance and I got it. I have had the same experience that you have had several times in regards to having the high bid when the auction has ended, been shown as the winner, only to refresh the screen, to see that it has been awarded to a lower bidder. It was the only item that I got.

kino · 11th January 2019, 12:52 PM

Quote:

Originally Posted by Spunjer

my thinking on this is the original owner wanted a prestigious looking handle but ol' dude is on McDonalds budget. ok, maybe Bob Evans.

Maybe a Jollibee budget...?

kai · 11th January 2019, 06:50 PM

Hello Ron,

Quote:

i didn't paid that much attention at the inlays; i was more enamored with the naga on the blade. overall, i thought it was pretty consistent with barungs during the first quarter of the 20th century

Drac's blade is tough to read from pics. However, I thought about it probably being 19th c. and the scabbard + hilt restoration possibly being pre-WW2, or so.

I'm pretty sure the barung hilt I showed in post #7 is 19th c. (as mentioned above, I believe this hilt style might have been the first to receive MOP inlays already during the 19th c.). The pommel was crafted from high quality banati wood (with much later repairs).

Regards,
Kai

kai · 11th January 2019, 08:27 PM

Hello Drac,

Quote:

I cleaned the pommel with an oil solution; I rubbed the surface with a clean cloth and the polish. I am wondering as to what you think of as being an uneven surface on the side and top of the pommel

The striped appearance is fine - may not have been the most traditional preference for selecting wood though (if kamagong was used, it usually was only the darkest pieces while banati was usually selected for its chatoyance and burl).

I've marked the apparently weird looking surfaces in the pics in red (chipped areas in green). It may only be a lighting issue though.

Regards,
Kai

Spunjer · 11th January 2019, 10:54 PM

i'm still not following what you're referring to, Kai. so are you saying that the handle and scabbard are not original with the blade?

Kino, brah, Jolibee is fine dining lol. whatchu talking about?

drac2k: yeah, the bidding process was buggy, although i was lucky to snag a few of what i wanted. the barung, especially. talk about that, i was surprised a similar barung went for 2k!

drac2k · 12th January 2019, 03:57 AM

Kai,
On the red circles, it is lighting, but on the green circle, there is a chip and a piece about 1/16" split off and that is why you cannot see the scroll work. Great eyes, I missed that one myself.

kai · 12th January 2019, 06:13 PM

Hello Drac,

Quote:

On the red circles, it is lighting

Great, that eases things. In real life, I'd check the surfaces under magnification; higher magnification can even reveal tool marks, etc.

Regards,
Kai

kai · 12th January 2019, 06:33 PM

Hello Ron,

Quote:

i'm still not following what you're referring to, Kai. so are you saying that the handle and scabbard are not original with the blade?

Yup, that's my hunch: This blade may very well be 19th c. (can't judge wear, profile, etc. from pics to support this); the long ferrule (possibly the additional silver bands) and the wooden base of the grip area probably, too.

The pommel still gives me weird vibes, especially from the craftsmanship (as perceived from the pics) like the carved ukkil and fit of the inlay.

With a status barung I'd expect good quality narra wood for the scabbard; even if the wood choice got influenced by a limited budget, the carving does seem more like 20th c. to me.

Regards,
Kai

Spunjer · 12th January 2019, 08:12 PM

ok, i see what you're saying.

i should've looked more closely on this particular piece i reckon. but like i said, i saw the inlay on the blade and that's all it took. i guess at that point, a cursory look at the overall status of the sword and checked for looseness, and everything checked out. meaning it went straight to my want list. not to say it changed my perception. glad to know it went to someone from this forum.
Drac2k, are you bringing that to Baltimore?

drac2k · 12th January 2019, 09:34 PM

The Barong is going into the collection and it will be hibernating there for many years(hopefully), with a barong that has a similar centipede blade design.
Hope to see you in Baltimore!

8th January 2019, 08:34 PM	#1
drac2k Member Join Date: Jun 2013 Posts: 1,230	Interesting Barong for Comment. I recently picked this up at auction. It has a nice blade with the reoccurring centipede motif with a silver ferrule, however, I'm not too sure of the metal wrap on the handle. Is this a more recent addition? Any comments would be appreciated. Attached Images

9th January 2019, 07:37 PM	#9
Spunjer Member Join Date: Dec 2004 Location: Witness Protection Program Posts: 1,730	Hello Drac. nice catch! you beat me by literally half a second, lol regarding the barung, i have the privilege of handling this before the auction. nothing in this particular barung says that it was a later piece; it's just that it was well taken cared off. i don't think the pommel was a later replacement either. as far as the brass rings; it's not a common method but i noticed these are more prevalent on wood junggayans similar to this. here is another example with brass/silver ferrule on a wooded junggayan. my thinking on this is the original owner wanted a prestigious looking handle but ol' dude is on McDonalds budget. ok, maybe Bob Evans. Attached Images

8th January 2019, 11:28 PM	#3
drac2k Member Join Date: Jun 2013 Posts: 1,230	Thanks Kai. Those possibilities also came to my mind; that is why I feel that the blade and the silver ferrule are original and the other components could be later add-ons or modifications. The metal fits almost seamlessly and I think that your point that there may have been some bindings at the junctions is very reasonable. In my limited experience, I haven't seen that type of pattern on the sheeting covering the handle. The handle was very dark before I cleaned it with silver polish. What areas did you want to know if it was "worn?'

9th January 2019, 01:35 AM	#4
Battara EAAF Staff Join Date: Dec 2004 Location: Louisville, KY Posts: 7,219	I agree that the brass parts are recent as well as the pommel. The style of carving and the mother-of-pearl inlays indicate this. However, I also agree that the blade and the silver parts are original. Also the scabbard is newer in style. Part of the problem is that no one in the Philippines can do the same weaving in silver wire as their ancestors anymore. Regarding the silver inlay, centipedes found in the Philippines (and the region) are huge and very poisonous. Great talisman to make the weapon lethal (and the owner protected?) Congratulations!

9th January 2019, 01:53 AM	#5
drac2k Member Join Date: Jun 2013 Posts: 1,230	Thanks for the imput.

9th January 2019, 02:49 PM	#6
kino Member Join Date: Dec 2004 Posts: 1,002	Congrats on a nice win. The insets seems to be mother of pearl, I wonder if these are replacements or a sign of the pommels age. Usually on the older pieces, they're bone, some Ivory, but mother of pearl, rarely. The fit of the insets might also be a clue of its age. Nice blade. I also have a Barung with a similar centipede inlaid blade. Thanks for sharing.

9th January 2019, 03:35 PM	#7
kai Member Join Date: Apr 2005 Posts: 3,254	I'm with Albert on this one: This type of hilt may exhibit MOP inlay and still date from the second half of the 19th century. Here's a pic of what I believe to be a genuinely old example with original MOP inlay (both extensions of the pommel have been repaired though). Regards, Kai Attached Images

9th January 2019, 11:12 PM	#11
drac2k Member Join Date: Jun 2013 Posts: 1,230	Once again gentlemen, thanks for all of the valuable input! Kai, I cleaned the pommel with an oil solution; I rubbed the surface with a clean cloth and the polish. I am wondering as to what you think of as being an uneven surface on the side and top of the pommel; it is in fact the grain of the wood. Spunjer, first, you have some great pieces! Secondly, I know what you mean; I sat through the auction for hours(at home), totally frustrated, unable to get anything, either being the underbidder or getting totally blown away price-wise. The only reason why I think I got this was that it was at the end of the auction and everyone else either went home, ran out of money or fell asleep! The pictures weren't very good. Did you see the panabas and was it as nice as it looked?

10th January 2019, 10:25 PM	#12
Spunjer Member Join Date: Dec 2004 Location: Witness Protection Program Posts: 1,730	Kai, quite frankly, i didn't paid that much attention at the inlays; i was more enamored with the naga on the blade. overall, i thought it was pretty consistent with barungs during the first quarter of the 20th century drac2k, thanks! unfortunately, a few of those are no longer a part of my collection. as far as the barung, i really thought i won that, haha. only after i got my summary did i found out i didn't. the panabas was another piece i had my sight on. it was a beauty! again, the main reason why i wanted the panabas was because of the naga on the blade. and yes, unfortunately it went too rich for my blood, lol

11th January 2019, 04:11 AM	#13
drac2k Member Join Date: Jun 2013 Posts: 1,230	There were so many items at that auction that I thought I might get and was unable to and this one I didn't think I had a chance and I got it. I have had the same experience that you have had several times in regards to having the high bid when the auction has ended, been shown as the winner, only to refresh the screen, to see that it has been awarded to a lower bidder. It was the only item that I got.

11th January 2019, 10:54 PM	#17
Spunjer Member Join Date: Dec 2004 Location: Witness Protection Program Posts: 1,730	i'm still not following what you're referring to, Kai. so are you saying that the handle and scabbard are not original with the blade? Kino, brah, Jolibee is fine dining lol. whatchu talking about? drac2k: yeah, the bidding process was buggy, although i was lucky to snag a few of what i wanted. the barung, especially. talk about that, i was surprised a similar barung went for 2k!

12th January 2019, 03:57 AM	#18
drac2k Member Join Date: Jun 2013 Posts: 1,230	Kai, On the red circles, it is lighting, but on the green circle, there is a chip and a piece about 1/16" split off and that is why you cannot see the scroll work. Great eyes, I missed that one myself.

12th January 2019, 08:12 PM	#21
Spunjer Member Join Date: Dec 2004 Location: Witness Protection Program Posts: 1,730	ok, i see what you're saying. i should've looked more closely on this particular piece i reckon. but like i said, i saw the inlay on the blade and that's all it took. i guess at that point, a cursory look at the overall status of the sword and checked for looseness, and everything checked out. meaning it went straight to my want list. not to say it changed my perception. glad to know it went to someone from this forum. Drac2k, are you bringing that to Baltimore?

12th January 2019, 09:34 PM	#22
drac2k Member Join Date: Jun 2013 Posts: 1,230	The Barong is going into the collection and it will be hibernating there for many years(hopefully), with a barong that has a similar centipede blade design. Hope to see you in Baltimore!