![]() |
![]() |
#1 |
Member
Join Date: Aug 2017
Location: North Queensland, Australia
Posts: 183
|
![]()
G'day Guys,
I am a sword collector based in Australia. My main area of interest is British Napoleonic era swords. Last year I acquired a sword which has a feature I haven't come across before and I am hoping that someone here may be able to shed some light on it for me. The sword is a British mameluke-hilted sabre with what is known as a "quill-point" blade. "Quill-points" are pipe-back blades which feature a prominently raised false edge. They were popular among British cavalry officers in the 1810-1820 period. This particular sword appears to fit into this period. What is unusual about this sword is that the blade is made of steel which is meant to look like wootz. I have seen other swords of this period with mechanical Damascus blades and also blades which have been etched to resemble wootz, but never anything like this. Unfortunately there are no markings on the sword or scabbard to help identify who made it. It is difficult to get good photos of the patterns in the blade, but I am hoping that someone here might be able to tell me what sort of steel this is. Cheers, Bryce Davies |
![]() |
![]() |
![]() |
#2 |
EAAF Staff
Join Date: Feb 2005
Location: Centerville, Kansas
Posts: 2,196
|
![]()
I moved your thread here as I believe that you will have a better chance of finding the answers you are looking for here instead of the Ethno forum. Though I know little to nothing about these this in my opinion is a beautiful sword.
Best, Robert |
![]() |
![]() |
![]() |
#3 |
Member
Join Date: Sep 2014
Location: Austria
Posts: 1,903
|
![]()
Very interesting blade indeed! Thank you for opening this very interesting thread!
However, I seriously doubt the European origin of the blade and I am inclined towards Turkey or the Caucasus area. ![]() I will certainly follow this thread with much interest. ![]() |
![]() |
![]() |
![]() |
#4 |
Member
Join Date: Aug 2014
Location: Germany
Posts: 525
|
![]()
Hello Bryce,
your blade looks like a 19th ct. British or German Pipe-back blade. The blade seems made from Syrian Sham-Wootz. Roland |
![]() |
![]() |
![]() |
#5 |
Member
Join Date: Apr 2005
Posts: 3,252
|
![]()
I don't know - this would be the most active/bold sham I've seen...
I was thinking about shear steel which can resemble sham, too. Again very bold though! It seems that the corrosion is not really following the pattern which seems odd for any type of patterned steel, isn't it? Regards, Kai |
![]() |
![]() |
![]() |
#6 | |
Member
Join Date: Aug 2014
Location: Germany
Posts: 525
|
![]() Quote:
The pattern is of importance for the corrosion if we have a rough grain with openings. If we have a fine grain without openings, the corrosion sensivity is much lower. I think this beautiful sword is a Oriental contract work for a European customer. I know, that deeply curved Persian or Ottoman swords has been very popular in the armys of Napoleonic time. Proven officers often had been rewarded with mameluke sword types. Regards, Roland |
|
![]() |
![]() |
![]() |
#7 |
Member
Join Date: Aug 2017
Location: North Queensland, Australia
Posts: 183
|
![]()
G'day Guys,
Thanks for your feedback. This blade type seems to have been particularly favoured by British officers serving in India. I was thinking that this sword was a special order from an officer who had served in India and had seen wootz blades and wanted something with the same look. I have read that European swordsmiths were trying to recreate wootz blades around this time. Maybe this is an example of their attempts? Most quill-points are relatively straight. This one is slightly more curved than normal. Below is a photo comparing it to a more regular heavy cavalry example. Cheers, Bryce Last edited by Bryce; 31st August 2017 at 07:17 AM. |
![]() |
![]() |
![]() |
#8 |
Member
Join Date: Jan 2016
Location: Chino, CA.
Posts: 217
|
![]()
You said there are no marking on the sword or scabbard that would tell you who made it. Is that typical of these?
|
![]() |
![]() |
![]() |
#9 |
Member
Join Date: Aug 2017
Location: North Queensland, Australia
Posts: 183
|
![]()
G'day Helleri,
Most British swords of this era are marked, but there are many that aren't, so not unusual. Cheers, Bryce |
![]() |
![]() |
![]() |
#10 |
Member
Join Date: Apr 2017
Location: Sweden
Posts: 688
|
![]()
What was the point with quill point swords? Were there any practical reasons for them, or mostly for show? It looks like a variation of the false edge of a sabre and the "T" back of a Kilic.
|
![]() |
![]() |
![]() |
#11 | |
Member
Join Date: Jan 2006
Posts: 936
|
![]() Quote:
|
|
![]() |
![]() |
![]() |
#12 | |
Member
Join Date: Apr 2016
Posts: 27
|
![]() Quote:
Swords with quill-pointed blades were still being purchased by some cavalry officers of the EIC in the middle 1850s (largely irregular cavalry), as it appears the ram-rod back (or pipe-back) to the blade was considered more rigid, and combined with the style of point, better used to penetrate mail. Swords with the ram-rod back, but no pronounced quill point were also made for cavalry troopers at the time of the Mutiny of 1857, with use likely extending into the 1860s. There is also evidence that suggest that quill-pointed blades were still with some officers, some time after the mutiny. |
|
![]() |
![]() |
![]() |
#13 | |
Member
Join Date: Aug 2017
Location: North Queensland, Australia
Posts: 183
|
![]() Quote:
The quill-point was an attempt to make a straight thrusting sword that had a curved cutting edge. It is a good thrusting sword, but unfortunately the thick, reinforced spine gets in the way of a good cut. Nevertheless, it can still deliver a nasty slash. It also has a very sharp, but still strong point. It looks frightening, but I suspect it wasn't that effective in combat, hence the short service life, (except in India and in a shortened naval form). Cheers, Bryce |
|
![]() |
![]() |
![]() |
#14 |
Member
Join Date: Dec 2004
Location: California
Posts: 1,036
|
![]()
Weren't swords based on regulation patterns sometimes made-to-order for British officers by native swordsmiths in India?
|
![]() |
![]() |
![]() |
#15 |
Member
Join Date: Aug 2017
Location: North Queensland, Australia
Posts: 183
|
![]()
G'day Guys,
So the jury is out? If only the smith had marked his work. Were Eastern smiths still producing wootz at this time? Cheers, Bryce |
![]() |
![]() |
![]() |
#16 |
Member
Join Date: Dec 2004
Location: California
Posts: 1,036
|
![]()
Wootz blades dated throughout the 19th cent. are seen on Indian, Persian, and Ottoman weapons. Europeans wanted to find out the secret to making the stuff for centuries. A Frenchman succeeded early in the 19th cent, but it never went beyond a few prototype blades. More successful were the Russians -- an engineer named Anossov cracked the secret by the late 1830s and a limited number of saber blades were produced under his supervision at the imperial sword factory at Zlatoust in the early 1840s. Examples occasionally reach the market today but they are not common. Anossov's penchant for secrecy meant that the process pretty much stayed in his pocket, so it died with him. In Russian, wootz is referred to as "bulat", an obvious derivation from Farsi (Persian) "foulad", literally meaning steel but crystalline damask in particular.
|
![]() |
![]() |
![]() |
#17 |
Member
Join Date: Aug 2017
Location: North Queensland, Australia
Posts: 183
|
![]()
G'day Guys,
I recently came across a photo of an Indian tulwar with a pipe-back blade in the British style, which appears to be wootz. Perhaps my quill point could be some sort of wootz after all? Below is a photo of a British 1796 light cavalry officer sword made around 1815 to compare it to. Cheers, Bryce |
![]() |
![]() |
![]() |
#18 |
Member
Join Date: Jan 2005
Posts: 478
|
![]()
Looks to me like it could be shear steel. Here is a ling to a knife made with it.
https://www.bing.com/images/search?v...vt=0&eim=1,2,6 |
![]() |
![]() |
![]() |
#19 |
Member
Join Date: Aug 2017
Location: North Queensland, Australia
Posts: 183
|
![]()
Thanks mate. It could be shear steel. There are quite a few threads on this forum discussing blades with very similar patterns to mine. No body seems to be able to agree whether they are some sort of wootz or some sort of shear steel. Microscopic examination may be the only way to tell for sure.
Cheers, Bryce |
![]() |
![]() |
![]() |
#20 | |
Member
Join Date: Apr 2018
Location: UK
Posts: 36
|
![]() Quote:
|
|
![]() |
![]() |
![]() |
#21 |
Member
Join Date: Dec 2004
Location: Ann Arbor, MI
Posts: 5,503
|
![]()
In Manfred Sachse book “ Damascus steel” there is an example of a similar pattern. It is called “ rafinated steel”, a variety of Damascus superficially resembling sham wootz.
|
![]() |
![]() |
![]() |
#22 |
Member
Join Date: Aug 2017
Location: North Queensland, Australia
Posts: 183
|
![]()
Thanks Ariel,
I don't have the book, but I will do some research on "rafinated steel". Cheers, Bryce |
![]() |
![]() |
![]() |
|
|