![]() |
|
![]() |
#1 |
Lead Moderator European Armoury
Join Date: Dec 2004
Location: Portugal
Posts: 9,694
|
![]()
The usual dilemma ... or not.
Mortars for cerimony events, signal bombards, battle traps ... or remotely hand cannons. Very sturdy examples; the larger one with 19 cms. height, 7,5 cms on the base, a 50 m/m "caliber" and a weight of 4,9 kgs. The smaller one with 16 cms height, 8 cms on the base, a 45 m/m mouth and a weight of 5,8 Kgs, due to its thicker walls. No doubt they are rought iron. The smaller one has a particular detail; the touch hole, having been worn due to (apparent) frequent use, had a perfect patch applied and a new hole made on the next (not opposite) side. I wonder how old these things are. Someone giving a hint here? Don't forget that, even if they are not meant to be weapons, they end up being so as, due to their weight, they easily qualify to knock any adversary down ![]() . |
![]() |
![]() |
![]() |
#2 |
Vikingsword Staff
Join Date: Nov 2004
Posts: 6,287
|
![]()
I would like a long Linstock for the piece on the right were I to be the 'Gunner' .
![]() The other one seems like it might have employed some sort of fuse . I think I'm becoming interested in old things that go Bang ! ![]() ![]() ![]() |
![]() |
![]() |
![]() |
#3 |
(deceased)
Join Date: Sep 2008
Location: Bavaria, Germany - the center of 15th and 16th century gunmaking
Posts: 4,310
|
![]()
Hi 'Nando,
It sure is a tricky thing to discern whether these short barrels are mortars or actual hand cannon that were stocked originally. The shape and surface of these two specimen would allow both interpretations. If they were hand cannon I would say they are at least 500 years old. If they were mortars they mave have been made as late as the early 19th century. As such items were always kept in the open and hardly ever saw any care or oil they alyways look kind of rotten and 'extremely old'. The rough inner surfaces seem to suggest that they were not bored out but left the way they were when wrought around an iron core. The feature of a touch hole spiked and relocated is a thing only found on actually very old barrels as it eemed to take a tremendous time span to wear out a touch hole to the extent that too much gas left. Apart from that, touch holes of ca. 1500 often were unusually large right from the start, as I have pointed out in former threads on my early barrels. In any case I can add a few items from my collection to Rick's input on linstocks and especially igniting irons which were used to fire all kinds of firearms without mechanisms. I do not think though that the barrel with the smaller touch hole was meant for match ignition as match cord was at least 10 mm thick, and often even much thicker while the small pointed prick of an igniting iron could reach into a small touch hole. Unfortunately, this prick is now missing from the few suriving igniting irons. Please see also http://www.vikingsword.com/vb/showth...t=15th+barrels http://www.vikingsword.com/vb/showth...ight=linstocks http://www.vikingsword.com/vb/showth...ight=linstocks Best, Michl Last edited by Matchlock; 5th June 2012 at 03:32 PM. |
![]() |
![]() |
![]() |
#4 |
(deceased)
Join Date: Sep 2008
Location: Bavaria, Germany - the center of 15th and 16th century gunmaking
Posts: 4,310
|
![]()
A few more close-ups of the serpent head of my igniting iron, mid-16th c.
The original igniting prick (Zündstachel) for entering the touch hole, which seems to have been an extension of the mouth (now flattened), is missing. m Last edited by Matchlock; 6th June 2012 at 02:58 PM. |
![]() |
![]() |
![]() |
#5 |
Lead Moderator European Armoury
Join Date: Dec 2004
Location: Portugal
Posts: 9,694
|
![]()
Thank you for your input, Michl.
This time i would go for the mortar version, but maybe a bit earlier, like late XVIII century. What do you think? Here they are again, after a good wash, some scrubbing with a brass brush and an oil soaking session. . |
![]() |
![]() |
![]() |
#6 | |
(deceased)
Join Date: Sep 2008
Location: Bavaria, Germany - the center of 15th and 16th century gunmaking
Posts: 4,310
|
![]() Quote:
I still can't tell for sure what exactly their use was. Remember that many 14th/15th c. 'handgonnes' were used as mortars for centuries after. I liked them better in their original patina though. m |
|
![]() |
![]() |
![]() |
#7 | |
Lead Moderator European Armoury
Join Date: Dec 2004
Location: Portugal
Posts: 9,694
|
![]() Quote:
![]() ![]() ![]() |
|
![]() |
![]() |
![]() |
#8 | |
Vikingsword Staff
Join Date: Nov 2004
Posts: 6,287
|
![]() Quote:
![]() |
|
![]() |
![]() |
![]() |
#9 |
Vikingsword Staff
Join Date: Nov 2004
Posts: 6,287
|
![]()
Michael, is it that the Igniting Irons were kept red hot during actions ?
That being the case; no wonder ones with their original tips are rare . The red-hot bulbous head of your serpent example would have stored more heat longer in the tip than the heavily eroded first example you show . |
![]() |
![]() |
![]() |
#10 |
(deceased)
Join Date: Sep 2008
Location: Bavaria, Germany - the center of 15th and 16th century gunmaking
Posts: 4,310
|
![]()
Exactly, Rick,
That's what I noted earlier in a similar thread: http://www.vikingsword.com/vb/showth...ight=linstocks They were kept resting in a bowl filled with glowing coal to retain their red heat. The bulbous, pear-shaped form on igniting irons which could hold the heat longer does not seem to have turned up before the 16th century (images attachted). But even those bulbous heads were equiped with tapering pricks (Zündstachel) for small touch holes which have also mostly fallen off, due to a permanent change of exposure to red heat and rust. The photo with the big cannon was taken in the 15th c. armory of the Fortress Oberhaus in Passau, Lower Bavaria, where three of my finest hackbut barrels came from, one of them dated 1481, which makes it the earliest dated small firearm known: http://www.vikingsword.com/vb/showth...highlight=1481 The Passau hackbut barrels can be seen on the wall to the right of the cannon. The outside of the fortress walls is dated 1499. The barrel of the cannon is dated 1726 and left to the piece two igniting irons can be seen on their long hafts, alongside with two scourers (Rohrwischer). Best, Michael Last edited by Matchlock; 6th June 2012 at 03:06 PM. |
![]() |
![]() |
![]() |
#11 | |
(deceased)
Join Date: Sep 2008
Location: Bavaria, Germany - the center of 15th and 16th century gunmaking
Posts: 4,310
|
![]() Quote:
As I stated formerly in another thread, igniting irons had to be kept resting in a bowl with glowing coal on a fire all the time during action - and that right next to the cannon and the powder barrels!!! http://www.vikingsword.com/vb/showth...ight=linstocks Attached please find the most exact period representation known to me, from Jean Mansel's illuminated Late-Gothic manuscript La fleur des histoires, France, 1453-63, Geneva Library, Ms fr. 64, fol 196r. I posted these scans earlier; they also depict the earliest form of an igniting iron, sharply angled and still without the reinforced bulbous head and only featuring a long, thin prick; this type was first represented in Konrad Kyeser's 1405 manuscript Bellifortis (two attachments below), and the only known surviving sample is preserved in my collection, in excavated condition but retaining a portion of its original haft (the one on top in the last attachment). Best, Michael Last edited by Matchlock; 6th June 2012 at 04:33 PM. |
|
![]() |
![]() |
![]() |
|
|