Choosing a Ukiran

blue lander · 1st June 2015, 03:50 PM

I just picked this Keris blade up for a pittance. It appears to be missing the ganja, ring, and ukiran. I presume there's nothing to be done about the missing ganja, but I would like to buy a new ukiran for it from e-bay.

Are there any criteria to picking a ukiran? Should it be from the same area as the keris blade?

It's hard to tell from the pictures, but the blade itself looks OK. The dagger beneath it is supposedly from Chad, please ignore it.

David · 1st June 2015, 04:08 PM

It does indeed look to be a decent blade, though you are correct that the gonjo is missing. I wouldn't say that there is "nothing" you can do about that, but i'm not sure it would be worth you while to replace it since it would probably be far more than the cost of the keris to do so.
The blade and sheath appear to be Javanese. Even if the blade were not from Jawa i would say that it makes the most amount of sense to me to match the hilt to the rest of the dress rather than the blade. The outward appearance of your keris is usually best when it displays one unified cultural identity.
I am traveling at the moment, but i am sure that some of our members will be able to post examples of hilts that would suit this keris.

blue lander · 1st June 2015, 04:35 PM

Any examples would be appreciated, thanks. I looked around e-bay and even the cheapest ukirans would double the amount of money I spent on it. But I think after cleaning the scabbard up it'll look nice and be worth the money.

Sajen · 1st June 2015, 08:15 PM

A Solo hilt would be ok for this keris, see attached example.

Regards,
Detlef

Jean · 1st June 2015, 08:54 PM

Or an East Java hilt, see example.
Personally I consider that a blade without ganja is worthless and as this one is of decent quality as David says I would try to find one but unless you have good contacts in Indonesia it will be very difficult.
Regards

A. G. Maisey · 2nd June 2015, 12:34 AM

make a new gonjo yourself, its a simple job that only requires basic hand tools and a bench vice

you use mild steel

not really a proposition to get one made unless you live in jawa

Roland_M · 2nd June 2015, 05:19 PM

I had this blade on my watching list, but i missed the end of the auction. It is a very good base for a complete restoration.

I know a german website, which maybe can help you with a new ganja. If you are interested, please send me a pm, it is a commercial site.

Regards

COYOTE · 3rd June 2015, 03:39 AM

Hi Blue Lander,
Yes you are absolutely right. You are supposed, as a collector, to re-establish the piece as close as it was when it was created. So, probably Javanese - my "nose" says but I can't be sure, around 50-100 years old; please someone more experienced than me is allowed to deny what I just "feel". I would choose a nice vintage wood, simply carved but with a good smooth patina hilt. It will match perfectly I guess, especially if you can find a wood of same color as the sheath.

GIO · 4th June 2015, 06:12 PM

Making a good ganja is not so easy for an untrained person. I personally tried a few times with not very convincing results. Moreover in your case, since the blade is in good conditions, the ganja should have about the same appearance.
You could try to find out a scrap keris with a good ganja and adapt it to your blade, if necessary. This is a method I used a couple of times.
Alternatively you could look for loose ganjas in the Swap Forum. I bet in Java is plenty of such parts.

blue lander · 5th June 2015, 12:00 PM

Thanks for the advice everyone. When it arrives I'll clean the wood and try to find a matching one on eBay . In the mean time I do have an ukiran from a 50's era tourist keris that will probably fit.

A friend is going to cut a piece of steel for me that I can file into shape for the ganja. If it doesn't turn out well I'll try procuring an original one

Sajen · 5th June 2015, 06:39 PM

Quote:

Originally Posted by blue lander

A friend is going to cut a piece of steel for me that I can file into shape for the ganja. If it doesn't turn out well I'll try procuring an original one

Hello Blue,

the suggestion Roland has given you is a very good one, I know this website and the ganja will be worked in Indonesia and don't will be very expensive. When you pm me I can explain it.

Regards,
Detlef

blue lander · 11th June 2015, 01:22 AM

It arrived today. It's a rather delicate and thin compared to my other keris. It's a bit rusty but not too bad. The tang is really long, too long to fit any of my other ukirans. I'll give it a soak in some coconut water.

1st June 2015, 03:50 PM	#1
blue lander Member Join Date: Nov 2013 Posts: 456	Choosing a Ukiran I just picked this Keris blade up for a pittance. It appears to be missing the ganja, ring, and ukiran. I presume there's nothing to be done about the missing ganja, but I would like to buy a new ukiran for it from e-bay. Are there any criteria to picking a ukiran? Should it be from the same area as the keris blade? It's hard to tell from the pictures, but the blade itself looks OK. The dagger beneath it is supposedly from Chad, please ignore it. Attached Images

1st June 2015, 08:15 PM	#4
Sajen Member Join Date: Aug 2007 Location: Germany, Dortmund Posts: 8,781	A Solo hilt would be ok for this keris, see attached example. Regards, Detlef Attached Images

1st June 2015, 08:54 PM	#5
Jean Member Join Date: Jun 2009 Posts: 1,740	Or an East Java hilt, see example. Personally I consider that a blade without ganja is worthless and as this one is of decent quality as David says I would try to find one but unless you have good contacts in Indonesia it will be very difficult. Regards Attached Images

11th June 2015, 01:22 AM	#12
blue lander Member Join Date: Nov 2013 Posts: 456	It arrived today. It's a rather delicate and thin compared to my other keris. It's a bit rusty but not too bad. The tang is really long, too long to fit any of my other ukirans. I'll give it a soak in some coconut water. Attached Images

1st June 2015, 04:08 PM	#2
David Keris forum moderator Join Date: Aug 2006 Location: Nova Scotia Posts: 7,124	It does indeed look to be a decent blade, though you are correct that the gonjo is missing. I wouldn't say that there is "nothing" you can do about that, but i'm not sure it would be worth you while to replace it since it would probably be far more than the cost of the keris to do so. The blade and sheath appear to be Javanese. Even if the blade were not from Jawa i would say that it makes the most amount of sense to me to match the hilt to the rest of the dress rather than the blade. The outward appearance of your keris is usually best when it displays one unified cultural identity. I am traveling at the moment, but i am sure that some of our members will be able to post examples of hilts that would suit this keris.

1st June 2015, 04:35 PM	#3
blue lander Member Join Date: Nov 2013 Posts: 456	Any examples would be appreciated, thanks. I looked around e-bay and even the cheapest ukirans would double the amount of money I spent on it. But I think after cleaning the scabbard up it'll look nice and be worth the money.

2nd June 2015, 12:34 AM	#6
A. G. Maisey Member Join Date: May 2006 Posts: 6,893	make a new gonjo yourself, its a simple job that only requires basic hand tools and a bench vice you use mild steel not really a proposition to get one made unless you live in jawa

2nd June 2015, 05:19 PM	#7
Roland_M Member Join Date: Aug 2014 Location: Germany Posts: 525	I had this blade on my watching list, but i missed the end of the auction. It is a very good base for a complete restoration. I know a german website, which maybe can help you with a new ganja. If you are interested, please send me a pm, it is a commercial site. Regards

3rd June 2015, 03:39 AM	#8
COYOTE Member Join Date: Dec 2014 Location: Rio de Janeiro - Brazil Posts: 27	Hi Blue Lander, Yes you are absolutely right. You are supposed, as a collector, to re-establish the piece as close as it was when it was created. So, probably Javanese - my "nose" says but I can't be sure, around 50-100 years old; please someone more experienced than me is allowed to deny what I just "feel". I would choose a nice vintage wood, simply carved but with a good smooth patina hilt. It will match perfectly I guess, especially if you can find a wood of same color as the sheath.

4th June 2015, 06:12 PM	#9
GIO Member Join Date: Dec 2009 Posts: 313	Making a good ganja is not so easy for an untrained person. I personally tried a few times with not very convincing results. Moreover in your case, since the blade is in good conditions, the ganja should have about the same appearance. You could try to find out a scrap keris with a good ganja and adapt it to your blade, if necessary. This is a method I used a couple of times. Alternatively you could look for loose ganjas in the Swap Forum. I bet in Java is plenty of such parts.

5th June 2015, 12:00 PM	#10
blue lander Member Join Date: Nov 2013 Posts: 456	Thanks for the advice everyone. When it arrives I'll clean the wood and try to find a matching one on eBay . In the mean time I do have an ukiran from a 50's era tourist keris that will probably fit. A friend is going to cut a piece of steel for me that I can file into shape for the ganja. If it doesn't turn out well I'll try procuring an original one