Katar with massive wootz blade

Roland_M · 27th April 2016, 11:02 PM

Hello everybody,

Here is an Indian Katar, maybe the highest quality blade in my collection.
The massive Blade is 23 cm long, 7 cm wide at the base and ~10 mm thick at the thickest point. With a weight 750 Gramm ( 26.5 oz.) this Katar is very heavy. It is more a very short sword than a dagger. This Katar was used very intensively, the cutting edges have many tiny nicks, the point was slightly deformed.

I don’t know how the bars are attached. All I can say is that they are not attached from outside and not glued from inside.

The condition when I received it was a very well base for a restoration. I decided to apply a mirror finish on the cutting edges and a darker finish in the chiseled areas.

The polishing and the etching letting a nice pattern appear, very fine spheroidized wootz.
I added some macro pictures of the pattern.

Best wishes and every comment is welcome!
Roland

Roland_M · 27th April 2016, 11:03 PM

Some macro pictures.
Microscopic fine wootz with a chaotic pattern. Too detailed to see all details with the bare eyes.

A. G. Maisey · 27th April 2016, 11:26 PM

The bars appear to have been cut from a single block of iron, and an oblong plate left at each end, the oblong plate has been recessed into the vertical bars and probably forge welded into place.

Battara · 28th April 2016, 12:49 AM

I believe that some of these little "spheres" are called pearlite. This happens to some wootz in the process of manufacture. I had a small Mughal kard once that had pearlite just like this in the wootz blade.

Rick · 28th April 2016, 01:13 AM

The pattern almost looks like stone in some places.

ariel · 28th April 2016, 01:51 AM

Beautiful Indian wootz!

Persians figured out how to make "twisted" patterns, likely by adjusting the direction and the force of pounding. The dendrites were "arranged" in a controlled fashion. Old Indian wootz was exactly like Roland's katar: they just pounded the hell out of it, breaking the dendrites into small fragments. Only in ~ 17th century did they start producing Persian variety: the Mughals imported Persian masters and the standards of beauty have shifted to the more elaborately organized patterns.

I have been told by the bladesmiths that mechanically Indian wootz was heads and shoulders better than the Persian one. This is, of course, purely theoretical assertion: AFAIK, no head-to-head competition was ever conducted. Even funnier, I am unaware of any similar test versus mechanical damascus or even high-carbon monosteel:-)

Anyone here has such information?

Jens Nordlunde · 28th April 2016, 09:29 PM

Roland,

You have a very nice katar. I dont envy you, but I wished it was mine - and I am very fond of katars :-).
There are some things related to some of the katars I have, which makes me believe that they must come from the same area. However, I am researching it, so I will not théll more at the moment.

Jens

Roland_M · 29th April 2016, 04:16 PM

Hello Jens,

Thank you for your comment. I have one additional picture, which is worth to show. The Katar have a very interesting pattern from differential hardening.
The area around the point on both sides looks like an arrow with two small barbed hooks.

Also my best wishes to Detlef! I hope, the loss of your favourite cat do not hurt you too much.

Roland

Jens Nordlunde · 29th April 2016, 04:38 PM

I remember that it was shown here http://www.vikingsword.com/vb/showth...ghlight=Roland

27th April 2016, 11:02 PM	#1
Roland_M Member Join Date: Aug 2014 Location: Germany Posts: 525	Katar with massive wootz blade Hello everybody, Here is an Indian Katar, maybe the highest quality blade in my collection. The massive Blade is 23 cm long, 7 cm wide at the base and ~10 mm thick at the thickest point. With a weight 750 Gramm ( 26.5 oz.) this Katar is very heavy. It is more a very short sword than a dagger. This Katar was used very intensively, the cutting edges have many tiny nicks, the point was slightly deformed. I don’t know how the bars are attached. All I can say is that they are not attached from outside and not glued from inside. The condition when I received it was a very well base for a restoration. I decided to apply a mirror finish on the cutting edges and a darker finish in the chiseled areas. The polishing and the etching letting a nice pattern appear, very fine spheroidized wootz. I added some macro pictures of the pattern. Best wishes and every comment is welcome! Roland Attached Images

27th April 2016, 11:03 PM	#2
Roland_M Member Join Date: Aug 2014 Location: Germany Posts: 525	Some macro pictures. Microscopic fine wootz with a chaotic pattern. Too detailed to see all details with the bare eyes. Attached Images

29th April 2016, 04:16 PM	#8
Roland_M Member Join Date: Aug 2014 Location: Germany Posts: 525	Hello Jens, Thank you for your comment. I have one additional picture, which is worth to show. The Katar have a very interesting pattern from differential hardening. The area around the point on both sides looks like an arrow with two small barbed hooks. Also my best wishes to Detlef! I hope, the loss of your favourite cat do not hurt you too much. Roland Attached Images

27th April 2016, 11:26 PM	#3
A. G. Maisey Member Join Date: May 2006 Posts: 6,889	The bars appear to have been cut from a single block of iron, and an oblong plate left at each end, the oblong plate has been recessed into the vertical bars and probably forge welded into place.

28th April 2016, 12:49 AM	#4
Battara EAAF Staff Join Date: Dec 2004 Location: Louisville, KY Posts: 7,219	I believe that some of these little "spheres" are called pearlite. This happens to some wootz in the process of manufacture. I had a small Mughal kard once that had pearlite just like this in the wootz blade.

28th April 2016, 01:13 AM	#5
Rick Vikingsword Staff Join Date: Nov 2004 Posts: 6,291	The pattern almost looks like stone in some places.

28th April 2016, 01:51 AM	#6
ariel Member Join Date: Dec 2004 Location: Ann Arbor, MI Posts: 5,503	Beautiful Indian wootz! Persians figured out how to make "twisted" patterns, likely by adjusting the direction and the force of pounding. The dendrites were "arranged" in a controlled fashion. Old Indian wootz was exactly like Roland's katar: they just pounded the hell out of it, breaking the dendrites into small fragments. Only in ~ 17th century did they start producing Persian variety: the Mughals imported Persian masters and the standards of beauty have shifted to the more elaborately organized patterns. I have been told by the bladesmiths that mechanically Indian wootz was heads and shoulders better than the Persian one. This is, of course, purely theoretical assertion: AFAIK, no head-to-head competition was ever conducted. Even funnier, I am unaware of any similar test versus mechanical damascus or even high-carbon monosteel:-) Anyone here has such information?

28th April 2016, 09:29 PM	#7
Jens Nordlunde Member Join Date: Dec 2004 Location: Europe Posts: 2,718	Roland, You have a very nice katar. I dont envy you, but I wished it was mine - and I am very fond of katars :-). There are some things related to some of the katars I have, which makes me believe that they must come from the same area. However, I am researching it, so I will not théll more at the moment. Jens

29th April 2016, 04:38 PM	#9
Jens Nordlunde Member Join Date: Dec 2004 Location: Europe Posts: 2,718	I remember that it was shown here http://www.vikingsword.com/vb/showth...ghlight=Roland