![]() |
|
![]() |
#1 |
Vikingsword Staff
Join Date: Dec 2004
Location: The Aussie Bush
Posts: 4,144
|
![]()
More than 10 years ago I acquired this piece from the late Hank Spierenkamp. He called it a siraui. However, it does not look like examples of siraui illustrated in several reference sources, and I'm wondering if anyone has another name for it and an idea of where it originated.
The sharpened edge is towards the bottom of all the pictures. The hilt is upturned at its end, and the blade is slightly recurved, somewhat like a rencong. The hilt is polished smooth and I looked at it hard under magnification to see if it might be rhino horn--there is a defect at the end of the hilt that suggests it may be made of some type of horn--but I think it is more likely wood. (I'm willing to be persuaded that it may be rhino horn if someone has good reasons to believe that ![]() Your thoughts about where it comes from, what it may be called, and the hilt material are all very welcome. Ian. |
![]() |
![]() |
![]() |
#2 |
Keris forum moderator
Join Date: Aug 2006
Location: Nova Scotia
Posts: 7,085
|
![]()
Ian, you may find this thread helpful. It seems to me that there are at least two distinctively different blades that have been identified as siraui, on that may or may not be considered a fighting blade and one that is obviously intended first and foremost as a utility knife.
http://www.vikingsword.com/vb/showth...ghlight=siraui |
![]() |
![]() |
![]() |
#3 |
Vikingsword Staff
Join Date: Dec 2004
Location: The Aussie Bush
Posts: 4,144
|
![]()
Thanks David. Yes, I looked through the archives also. Not much here or elsewhere I'm afraid.
Hank was an experienced guy and I think his web site may still be up in memory of his contributions to collecting Indonesian knives and swords. I accepted his description as coming from someone who had many years of experience in the field. Would just like to confirm what he said and learn more about these knives, if anyone can help. Ian. Last edited by Ian; 28th December 2017 at 10:04 PM. |
![]() |
![]() |
![]() |
#4 |
Keris forum moderator
Join Date: Aug 2006
Location: Nova Scotia
Posts: 7,085
|
![]()
Well Ian, from what i understand as a siraui (both forms shown in the link i shared) i would not immediately identify your knife as one. Though the handle orientation seems similar your blade seems to be much slimmer than the siraui i have seen and most siraui seem to curve slightly upward throughout the length while yours seems to curve slightly downward. But who knows, it might just be one more variation on the theme.
![]() |
![]() |
![]() |
![]() |
#5 |
Member
Join Date: Aug 2007
Location: Germany, Dortmund
Posts: 8,716
|
![]()
Hi Ian,
I am afraid but I think like David that it fit neither the description of the classic Siraui like described nor the other form which get often named as Siraui. Here some more threads about this knives: http://www.vikingsword.com/vb/showth...ghlight=siraui, http://www.vikingsword.com/vb/showth...ghlight=siraui, http://www.vikingsword.com/vb/showth...ghlight=siraui, http://www.vikingsword.com/vb/showth...ghlight=siraui, http://www.vikingsword.com/vb/showth...ghlight=siraui Best regards, Detlef |
![]() |
![]() |
![]() |
#6 |
Vikingsword Staff
Join Date: Dec 2004
Location: The Aussie Bush
Posts: 4,144
|
![]()
Hi Detlef anf David:
Yes, I agree. It does not look like other examples discussed here or shown elsewhere. Thanks for the comments. Ian. |
![]() |
![]() |
![]() |
#7 | |||
Member
Join Date: Apr 2005
Posts: 3,249
|
![]()
Hello Ian,
Nice - that's a weird piece for sure! I believe that it's a really far stretch to call this a siraui. Having seen quite some siraui variants, neither the blade, nor the hilt, nor the scabbard does bear any relationship with typical siraui (nor any possibly related blades). Quote:
Quote:
Quote:
Regards, Kai |
|||
![]() |
![]() |
![]() |
#8 |
Vikingsword Staff
Join Date: Dec 2004
Location: The Aussie Bush
Posts: 4,144
|
![]()
Hello Kai,
Thanks for your thoughts. I think these are better pics of the defect and the end of the scabbard. The defect appears to be filled with resin. Blade length = 10.5 inches OAL = 15 inches OAL in scabbard = 16 inches Thickness of blade in front of hilt = 5/16 inch Maximum blade width (at hilt) = 3/4 inch Minimum blade width (near mid-point of blade) = 0.5 inch The blade does taper towards the tip but not a great deal until about a half-inch from the tip where it tapers fairly acutely to the point. The sharpened edge starts about 3.5 inches from the hilt. For a blade that is not very wide it is quite sturdy and thick. Probably a good thrusting weapon. Ian. . Last edited by Ian; 28th December 2017 at 09:20 PM. |
![]() |
![]() |
![]() |
#9 |
Member
Join Date: Aug 2007
Location: Germany, Dortmund
Posts: 8,716
|
![]()
Hi Ian,
the hole in the hilt seems natural to my eyes, I have a Kalasan hilt with a very similar hole at this place. Regards, Detlef |
![]() |
![]() |
![]() |
#10 |
Member
Join Date: Aug 2007
Location: Germany, Dortmund
Posts: 8,716
|
![]()
Forget, what to my feeling look weird is the orientation of the handle.
![]() |
![]() |
![]() |
![]() |
#11 | |
Member
Join Date: Apr 2005
Posts: 3,249
|
![]()
Hello Detlef,
Quote:
However, neither blade nor hilt nor scabbard do seem to vibe with any established pattern - another possible oddball... Regards, Kai |
|
![]() |
![]() |
![]() |
#12 | |
Member
Join Date: Apr 2005
Posts: 3,249
|
![]() Quote:
This is very unlikely to be a natural defect/malformation: The end of the hollow portion of a horn is a fairly acute and rounded "cone" - here we're looking at the endgrain and such a shallow depression does not make any sense unless there was something inlaid. OTOH, the shape does not seem to be perfectly regular and the whole piece is a rather plain ensemble without extant decorative elements... Regards, Kai |
|
![]() |
![]() |
![]() |
#13 | |
Member
Join Date: Aug 2007
Location: Germany, Dortmund
Posts: 8,716
|
![]() Quote:
here you go. Like said, at least by my kalasan handle I feel very confident that the hole is natural. When you look close you see the natural grain around the hole which is in the middle, I think to see the same by Ian's handle. Buffalo horn is hollow in the most of it's length and only at the end massive. I think it's a inadvertent accident from the carver. The hole in the handle from Ian's knive look very similar to my eyes. And the knife isn't fancy at all so I doubt that the hole is extra carved for a jimat. Just my thought which is worth like any other thought since we just don't know if the hole was carved with aim. ![]() Best regards, Detlef |
|
![]() |
![]() |
![]() |
#14 | |||
Member
Join Date: Apr 2005
Posts: 3,249
|
![]()
Hello Ian,
Thanks for the additional data! Quote:
Quote:
Quote:
Apparently the 2/3 edge got resharpened quite a lot, too - IMVHO quite excessive if this blade got predominantly utilized as dagger... Maybe a utility knife with more specialized function? Or a really convincing attempt at a sharpened pry-bar at last? ![]() ![]() Regards, Kai |
|||
![]() |
![]() |
![]() |
#15 |
Vikingsword Staff
Join Date: Dec 2004
Location: The Aussie Bush
Posts: 4,144
|
![]()
Kai,
It feels much more natural in the hand if the knife is held with the sharpened edge up and the thumb resting on the end of the blade. Perhaps that is why the edge is not sharpened for the first few inches. A stab to the abdomen and a slice upwards would be a devastating wound and likely to hit major blood vessels. Ian. |
![]() |
![]() |
![]() |
#16 | |||
Member
Join Date: Apr 2005
Posts: 3,249
|
![]()
Hello Ian,
Quote:
Quote:
![]() Quote:
Regards, Kai Last edited by kai; 29th December 2017 at 01:02 AM. |
|||
![]() |
![]() |
![]() |
|
|