Pandai Saras Luk 9

Gustav · 9th February 2011, 10:22 PM

Dear All,

a week ago I succeeded in obtaining this blade. Alas, it isn't a work of art like some Keris Pandai Saras from forum archives, also material is (most possibly) average and so the state of preservation, with some deeper pitting. There are also welding faults.

Yet I am very fond of this blade, and that's why you see so many bad (I'm sorry) pictures here

Some questions: is this a blade from Patani (which I suppose) or Kelantan? Why, what are the differences? Is it possible to draw a general schema of development (in words of course), how features of ricikan have changed over the time?

Thank you very much.

Gustav · 9th February 2011, 10:24 PM

More details:

Gustav · 9th February 2011, 10:36 PM

Sampir is made from wood, which resembles Trembalo to me, there isn't the structural "hardness" of Kemuning. Chatoyance is nice, yet the balance of forms is a little bit awkward? It lasted some time, till I understud the importance of parallel lines of the back of gonjo and bottom of sampir, like a frame.

Buntut is unfortunately missing.

Hilt is actually a very nice one, Kemuning.

kai · 10th February 2011, 01:35 AM

Hello Gustav,

Quote:

it isn't a work of art like some Keris Pandai Saras from forum archives, also material is (most possibly) average and so the state of preservation, with some deeper pitting. There are also welding faults.

I beg to differ: Looks like a genuine antique Pattani blade of good quality to me!

State of preservation may leave a bit to be desired; have seen more heavily corroded pandai Saras blades though. I think this will polish up nicely - have you tried to stain it?

Regards,
Kai

Alam Shah · 10th February 2011, 02:30 AM

What you have there is a good Pattani Pandai Saras with a chevron quenched technique blade. The crosspiece looks kemuning to me. The sheath's shaft, of sena (angsana).

Battara · 10th February 2011, 04:09 AM

What kind of buntut should this have? Wood or what?

Gustav · 10th February 2011, 09:02 AM

Thank you very much for comments.

Kai, his is how it looks after some days (careful) sanding, and two days in pineaple juice. I am to timid to do more polishing now (may be, when I will grow older

), the point where I stopped, is when the blackened, rough surface is being almost removed. When I would go further, I would end with a little bit smaller, smooth and shiny blade with some black welding fault lines and pitting (I felt). I simply don't have much experience, and now with this condition I am satisfied for a while.

Unfortunately I don't made pictures of the original condition, yet it was not a nice view.

Alam Shah, I think, I understand what you mean by chevron quenched, I wondered about these lines. Could you please tell more about it? I have never seen such before. I will try to make better pictures of sampir.

Battara, I think so. Bone or ivory one would be very slim, just a line. Will make a picture of a similar (yet existing) wooden buntut.

BluErf · 10th February 2011, 03:05 PM

Hi Gustav,

You are going to hate me for this, but without being able to clearly articulate the defining factors, I'm going to say that the keris is most likely Pattani in origin. The hilt form is what strikes me as being very clearly Pattani. The blade too, though for a while, I was struggling to say that it is Kelantanese because of the thicker ganja. However, in the end, I think the Pattani features win out a bit more, particularly the "recessed" gandik style. The sheath is an interesting one. Some people tell me that it is the Pattani interpretation of the Riau sheath form. I don't know. This keris does have a similar look and feel to one I posted earlier - see the 2nd keris in this thread:

http://www.vikingsword.com/vb/showthread.php?t=12828

9th February 2011, 10:22 PM	#1
Gustav Member Join Date: Jun 2009 Posts: 1,247	Pandai Saras Luk 9 Dear All, a week ago I succeeded in obtaining this blade. Alas, it isn't a work of art like some Keris Pandai Saras from forum archives, also material is (most possibly) average and so the state of preservation, with some deeper pitting. There are also welding faults. Yet I am very fond of this blade, and that's why you see so many bad (I'm sorry) pictures here Some questions: is this a blade from Patani (which I suppose) or Kelantan? Why, what are the differences? Is it possible to draw a general schema of development (in words of course), how features of ricikan have changed over the time? Thank you very much. Attached Images

9th February 2011, 10:24 PM	#2
Gustav Member Join Date: Jun 2009 Posts: 1,247	More details: Attached Images

9th February 2011, 10:36 PM	#3
Gustav Member Join Date: Jun 2009 Posts: 1,247	Sampir is made from wood, which resembles Trembalo to me, there isn't the structural "hardness" of Kemuning. Chatoyance is nice, yet the balance of forms is a little bit awkward? It lasted some time, till I understud the importance of parallel lines of the back of gonjo and bottom of sampir, like a frame. Buntut is unfortunately missing. Hilt is actually a very nice one, Kemuning. Attached Images

10th February 2011, 02:30 AM	#5
Alam Shah Member Join Date: Jan 2005 Location: Singapore Posts: 1,248	What you have there is a good Pattani Pandai Saras with a chevron quenched technique blade. The crosspiece looks kemuning to me. The sheath's shaft, of sena (angsana).

10th February 2011, 04:09 AM	#6
Battara EAAF Staff Join Date: Dec 2004 Location: Louisville, KY Posts: 7,219	What kind of buntut should this have? Wood or what?

10th February 2011, 09:02 AM	#7
Gustav Member Join Date: Jun 2009 Posts: 1,247	Thank you very much for comments. Kai, his is how it looks after some days (careful) sanding, and two days in pineaple juice. I am to timid to do more polishing now (may be, when I will grow older ), the point where I stopped, is when the blackened, rough surface is being almost removed. When I would go further, I would end with a little bit smaller, smooth and shiny blade with some black welding fault lines and pitting (I felt). I simply don't have much experience, and now with this condition I am satisfied for a while. Unfortunately I don't made pictures of the original condition, yet it was not a nice view. Alam Shah, I think, I understand what you mean by chevron quenched, I wondered about these lines. Could you please tell more about it? I have never seen such before. I will try to make better pictures of sampir. Battara, I think so. Bone or ivory one would be very slim, just a line. Will make a picture of a similar (yet existing) wooden buntut.

10th February 2011, 03:05 PM	#8
BluErf Member Join Date: Dec 2004 Location: Singapore Posts: 1,180	Hi Gustav, You are going to hate me for this, but without being able to clearly articulate the defining factors, I'm going to say that the keris is most likely Pattani in origin. The hilt form is what strikes me as being very clearly Pattani. The blade too, though for a while, I was struggling to say that it is Kelantanese because of the thicker ganja. However, in the end, I think the Pattani features win out a bit more, particularly the "recessed" gandik style. The sheath is an interesting one. Some people tell me that it is the Pattani interpretation of the Riau sheath form. I don't know. This keris does have a similar look and feel to one I posted earlier - see the 2nd keris in this thread: http://www.vikingsword.com/vb/showthread.php?t=12828