Storage advice needed

imas560 · 11th October 2010, 05:19 AM

Hello all,
school holidays are over so finally get a little bit of time to start posting again. I have become the proud owner of some lovely items that I won at auction which have turned up today.
My dilemma is that I know I will not be able to give them serious consideration for approx 2-3 months.
Some of the items need some TLC and I'm wanting to store them away so am hoping forum members might be able to give me some advice like: store in scabbard, out of scabbard, wrapped in plastic, spray with oil etc.
I have at my disposal desiccant sachets, oils like wd40, plastic sheeting and have a Bunnings/Hardware store close by.
First up a photo of the group.

Any help would be most appreciated.

Royston · 11th October 2010, 09:27 AM

Imas,

Nice little collection.
I would clean them and wax the blades.
If you have the space it is better to store or display them out of their scabbards - They look better and there is less chance of rusting due to moisture in the scabbards.
If in drawers or cupboards then using the silica gel may help especially if you live in a damp or humid climate.

The mandaus should really be displayed in my house

regards
Roy

Rich · 11th October 2010, 01:28 PM

Yes, store out of sheaths, use Rennaisance (sp?) wax on the metal blades and parts. Store in constant temp and humidity and they should be ok. I store my Japanese swords in a large gun safe at constant temp (+/- 5 degrees) and constant humidity of about 30 percent. Never had any trouble with rust. I don't wax my Japanese swords, but do my other knives and swords.

Rich S

imas560 · 11th October 2010, 11:20 PM

Thanks for the info.
Thought I would post some info about the items I bought. May take awhile though.
I have tried to reference from my copy of van Zonneveld for details.
The item referred to as the Dayak Mandau.
Dimensions:
Weight = 520gm approx.
Overall Length = 640mm.
Blade length (tip to hilt) = 495mm.
Point of balance = 370mm from tip.
Blade thickness along spine at 3 points.
Hilt = 8mm, midpoint blade = 6mm, 100mm from tip = 4mm.
Notes:
Resin (damar?) on hilt needs repair. Absence of coin (but looking at pics of other mandau have noticed the coin wasn't that usual, may be wrong). Absence of secondary knife (piso raout?), not sure if this had significant meaning, i.e.: absence of piso raout likely indication of utility use or particular tribe.

imas560 · 11th October 2010, 11:22 PM

Oh good point re gunsafe. Do you use a dehumidifier, desiccant or something similar in the safe?

imas560 · 11th October 2010, 11:26 PM

Rich · 12th October 2010, 12:49 PM

Quote:

Originally Posted by imas560

Oh good point re gunsafe. Do you use a dehumidifier, desiccant or something similar in the safe?

No, nothing but clean, dry air :-) in the gun safe although we do run a dehumdifier in the summer for the house.

Rich S

11th October 2010, 05:19 AM	#1
imas560 Member Join Date: Aug 2010 Posts: 180	Storage advice needed Hello all, school holidays are over so finally get a little bit of time to start posting again. I have become the proud owner of some lovely items that I won at auction which have turned up today. My dilemma is that I know I will not be able to give them serious consideration for approx 2-3 months. Some of the items need some TLC and I'm wanting to store them away so am hoping forum members might be able to give me some advice like: store in scabbard, out of scabbard, wrapped in plastic, spray with oil etc. I have at my disposal desiccant sachets, oils like wd40, plastic sheeting and have a Bunnings/Hardware store close by. First up a photo of the group. Any help would be most appreciated.

11th October 2010, 01:28 PM	#3
Rich Member Join Date: Dec 2004 Location: comfortably at home, USA Posts: 432	Yes, store out of sheaths, use Rennaisance (sp?) wax on the metal blades and parts. Store in constant temp and humidity and they should be ok. I store my Japanese swords in a large gun safe at constant temp (+/- 5 degrees) and constant humidity of about 30 percent. Never had any trouble with rust. I don't wax my Japanese swords, but do my other knives and swords. Rich S Last edited by Rich; 11th October 2010 at 06:18 PM.

11th October 2010, 11:26 PM	#6
imas560 Member Join Date: Aug 2010 Posts: 180	Dayak Mandau pic set 1

11th October 2010, 09:27 AM	#2
Royston Member Join Date: Mar 2008 Location: Poole England Posts: 443	Imas, Nice little collection. I would clean them and wax the blades. If you have the space it is better to store or display them out of their scabbards - They look better and there is less chance of rusting due to moisture in the scabbards. If in drawers or cupboards then using the silica gel may help especially if you live in a damp or humid climate. The mandaus should really be displayed in my house regards Roy

11th October 2010, 11:20 PM	#4
imas560 Member Join Date: Aug 2010 Posts: 180	Thanks for the info. Thought I would post some info about the items I bought. May take awhile though. I have tried to reference from my copy of van Zonneveld for details. The item referred to as the Dayak Mandau. Dimensions: Weight = 520gm approx. Overall Length = 640mm. Blade length (tip to hilt) = 495mm. Point of balance = 370mm from tip. Blade thickness along spine at 3 points. Hilt = 8mm, midpoint blade = 6mm, 100mm from tip = 4mm. Notes: Resin (damar?) on hilt needs repair. Absence of coin (but looking at pics of other mandau have noticed the coin wasn't that usual, may be wrong). Absence of secondary knife (piso raout?), not sure if this had significant meaning, i.e.: absence of piso raout likely indication of utility use or particular tribe.

11th October 2010, 11:22 PM	#5
imas560 Member Join Date: Aug 2010 Posts: 180	Oh good point re gunsafe. Do you use a dehumidifier, desiccant or something similar in the safe?