Terrs. The Omani Battle Shield. A Buckler.

[Ibrahiim al Balooshi]

The Omani Battle Shield is called Terrs...in Oman. This group below is by far the largest number I have ever encountered and in fact they carry a very rare sticker ...This type of Buckler was used with the Old Omani Battle Sword in actual combat and transferred to the ceremonial dancing sword (an example appearing left on the picture and sometime in the early 19th C.

The point of manufacture is usually regarded as Zanzibar though anywhere on the mainland adjoining region is also generally acceptable and types of hide vary from Rhino to Water buffalo as well as Hippo, Whale skin and Walrus hide. The metalwork are interesting as they are usually of brass (though I have seen silver used to ornament the centre rounded section) and have two roles; In disarming by twisting a trapped blade and in securing the Terrs handle by rings on the inside.

Please note that this system is often referred to as Saif wa Terrs (Sword and Shield) and that other countries in the region also refer to their sword/shield combinations in the same way.

Regards,
Ibrahiim al Balooshi.

[Ibrahiim al Balooshi]

Here is another with three different views. ...Sold earlier in the year from Imperial Auctions.

Regards,
Ibrahiim al Balooshi.

[Ibrahiim al Balooshi]

Note that http://www.icomam.be/downloads/issue07.pdf on page 90 has a rendition and pictures of some Omani Terrs. I have also alluded to other materials being used including reed and even wood which can be seen in the Richardson and Dorr Omani Artefacts double book.

Regards,
Ibrahiim al Balooshi.

[Miguel]

Originally Posted by Ibrahiim al Balooshi

Note that http://www.icomam.be/downloads/issue07.pdf on page 90 has a rendition and pictures of some Omani Terrs. I have also alluded to other materials being used including reed and even wood which can be seen in the Richardson and Dorr Omani Artefacts double book.

Regards,
Ibrahiim al Balooshi.

Hi Ibrahiim,
A most interesting thread. I had never heard of an Omani Terr until now, they look very similar to the Ethiopian shields. When I was a child our local museum had two Omani battle swords which we were told were made from the blades of crusaders swords which conjured up all sorts of things in the minds of us children, we thought them beautiful things and I still do. Thank you so much for this thread and for bringing back happy memories from my childhood.
Regards
Miguel

[Ibrahiim al Balooshi]

Originally Posted by Miguel

Hi Ibrahiim,
A most interesting thread. I had never heard of an Omani Terr until now, they look very similar to the Ethiopian shields. When I was a child our local museum had two Omani battle swords which we were told were made from the blades of crusaders swords which conjured up all sorts of things in the minds of us children, we thought them beautiful things and I still do. Thank you so much for this thread and for bringing back happy memories from my childhood.
Regards
Miguel

Salaams Miguel, Interestingly I had a shield ( Omani Terrs) with friends in the UK ...They bought it from me...and along with about 100 other items donated the whole lot to the research department at Durham University. They claim that the Omani Shield was in fact Ethiopian but whilst that may be the case the collecting centre and merchant hub for the entire region was Zanzibar...and included a large stretch of the African coastline and hinterland. No doubt that the great traders in that region who were Omanis collected many items (and slaves) etc from the whole area and deep into central Africa. Zanzibar then acted like a lightening rod for all tradeable commodities which included Terrs Shields; in great demand amongst the Manga (Omanis in Zanzibar) and for export to Oman.
Regarding the Old Omani Battle Sword which is the style you may be referring to it does look like it has stepped out of the 12 th C... because it has. In fact I place it earlier to the time of Ibn Julanda the first Imam of Oman in about 751/752 AD...... It compares favourably with the Abassiiid which can be seen at the Topkapi...There will be more about that later although it can be viewed at The Omani Battle Sword on Forum. Please see http://www.vikingsword.com/vb/showth...t=sayf+yamaani
Regards,
Ibrahiim al Balooshi.

[Miguel]

Originally Posted by Ibrahiim al Balooshi

Salaams Miguel, Interestingly I had a shield ( Omani Terrs) with friends in the UK ...They bought it from me...and along with about 100 other items donated the whole lot to the research department at Durham University. They claim that the Omani Shield was in fact Ethiopian but whilst that may be the case the collecting centre and merchant hub for the entire region was Zanzibar...and included a large stretch of the African coastline and hinterland. No doubt that the great traders in that region who were Omanis collected many items (and slaves) etc from the whole area and deep into central Africa. Zanzibar then acted like a lightening rod for all tradeable commodities which included Terrs Shields; in great demand amongst the Manga (Omanis in Zanzibar) and for export to Oman.
Regarding the Old Omani Battle Sword which is the style you may be referring to it does look like it has stepped out of the 12 th C... because it has. In fact I place it earlier to the time of Ibn Julanda the first Imam of Oman in about 751/752 AD...... It compares favourably with the Abassiiid which can be seen at the Topkapi...There will be more about that later although it can be viewed at The Omani Battle Sword on Forum. Please see http://www.vikingsword.com/vb/showth...t=sayf+yamaani
Regards,
Ibrahiim al Balooshi.

Hi Ibrahiim,
Thank you for your informative comments and may I take the opportunity to say that it is a pleasure to belong to a Forum having members as polite and knowledgable as yourself you are a mine of information. Thank you again.
Regards
Miguel

[estcrh]

Originally Posted by Ibrahiim al Balooshi

The Omani Battle Shield is called Terrs...in Oman. This group below is by far the largest number I have ever encountered

Ibrahiim, is that a private collection or from a museum, probably the most Omani shields anyone will ever see at one time.

[Ibrahiim al Balooshi]

Originally Posted by estcrh

Ibrahiim, is that a private collection or from a museum, probably the most Omani shields anyone will ever see at one time.

This is a private collection... I provided a couple of them ... It comprises more Terrs than I think I have ever seen in one group.

[kahnjar1]

Here is another which I have in my collection.
Stu

[ariel]

Originally Posted by Ibrahiim al Balooshi

The metalwork are interesting as they are usually of brass ....and have two roles; In disarming by twisting a trapped blade....

Regards,
Ibrahiim al Balooshi.

So the attacking blade is supposed to hit the protrusion of the shield, slide down and get trapped under the brass fitting?

This is interesting: is it really functional? Shouldn't the space between the fitting and the shield be bigger? It might be awfully difficult to squeeze the blade in such narrow crack.

In some examples here the crack does not seem to exist at all, and the hide "rings" would seem to prevent sliding of the blade and some would seem to obliterate the crack altogether.


Or am I not getting something important?

[Gavin Nugent]

Originally Posted by ariel

So the attacking blade is supposed to hit the protrusion of the shield, slide down and get trapped under the brass fitting?

This is interesting: is it really functional? Shouldn't the space between the fitting and the shield be bigger? It might be awfully difficult to squeeze the blade in such narrow crack.

In some examples here the crack does not seem to exist at all, and the hide "rings" would seem to prevent sliding of the blade and some would seem to obliterate the crack altogether.


Or am I not getting something important?

Ariel,

The outer brass decoration is only a decorative anchor point for the inner bronze loop and buckle that hold the handle in place...nothing more, nothing less, except perhaps the notion of what the bronze decoration was intended to represent visually...one only has to handle the buckler to see and understand this...and those bucklers with cuts from swords are damaged at the rim and elsewhere on its surfaces...

Now best intentions for bragging rights and perhaps stories of local legend may be some peoples goals when defending with the buckler...simply to say hey look what I did in a freakish moment...but the design elements do not support this as a catch hook nor does it function as one

Gavin

[Jim McDougall]

Actually one of the fascinating areas of the study of weapons is often the lore associated with them. While the presentation of these shields is descriptive as well as depictive with examples shown, I think the note on the 'function' of these features is more of a representation of such local lore rather than in actual use.

This sort of descriptive note is often included with many features of varied weapons, and while not necessarily subscribed to but simply inclusively .

I have always thought these were unusual in the pronounced dome shape, and when seeing them in person was admittedly stunned at what I consider pretty small size. I must admit if I were defending myself from a sword attack I would surely want a very big shield!

[ariel]

Yup.
Just like Crocodile Dundee bringing in a very big " knOife":-)

[Kubur]

Originally Posted by Jim McDougall

Actually one of the fascinating areas of the study of weapons is often the lore associated with them. While the presentation of these shields is descriptive as well as depictive with examples shown, I think the note on the 'function' of these features is more of a representation of such local lore rather than in actual use.

This sort of descriptive note is often included with many features of varied weapons, and while not necessarily subscribed to but simply inclusively .

I have always thought these were unusual in the pronounced dome shape, and when seeing them in person was admittedly stunned at what I consider pretty small size. I must admit if I were defending myself from a sword attack I would surely want a very big shield!

I think it's a "targe shield" or a "small rondache". The diameter of the targe is maximum 40cm, I think the Omani shield are around 20-30cm? the same function as a "main-gauche" dagger...
Best,

[Ibrahiim al Balooshi]

Salaams all above...Thank you for your input. This is an Omani Terrs.

On size; I think the key reference is #1 showing a variety of slightly different sizes. As noted by Gavin Nugent above; the device in brass is primarily for attaching the holding strap behind the Terrs. There are two ways of trapping the opponents blade..the first being to twist a blade which has been caught stuck in the hide shields face. The second method, it is said, is by trapping the opponents sword between the brass rectangle and the shield. I agree that is tenuous but with the thin swords quite possible; though I place the wording...: "it is said that"...

I think there is a question over the size of the shield and it may be considered what weapon this shield was first used with..? and that is perhaps best looked at when the Terrs was passed on from its defensive role with The Sayf Yamaani onto the Omani thin flexible Sayf. Two other functions were also transferred ...The sharpenend two edges of the weapon in honour of the forefathers and the flat spatulate tip.

Two answers to the shields size concerns the small stature of the average Omani and the speed factor... The concept was slash and chop with the heavier original Sayf Yamaani behind or ballanced with very fast manouvering behind the Terrs...also seen to devastating effect in the European Targe.

I think readers need to remember that the shield and sword were accompanied by the spear...which because of Gunpowder became extinct from probably the 18th C. The Terrs shield also goes in to battle with the Khanjar dagger and in the Funoon traditions there is such a dance performance usually seen in Southern Oman. The Bara'a.

Regarding decoration with silver which is an excellent observation...The question as to why and when may be interesting.. The Richardson and Dorr illustrates such a Terrs made in the samer shape but in wood... It contains examples of Terrs in reed as well...same shape. I suggest that once the Sayf Yamaani became Iconized in about 1830 a number of other design factors were introduced including the Busaidi Hilt on both it and the Royal Khanjar...plus the Royal Turban and the Royal Camerbund.

It seems probable that the Sayf Yamaani with the Iconized silver hilt will have brought designer attention to its Terrs...at the same time.

It is generally recognised that the wife of Said The Great ...or one of them..."Sheherazad"... the Persian princess... who designed the Al Busaidi Hilt to the Khanjar also may well have been the instigator for the other items.

see ... http://www.vikingsword.com/vb/showth...=omani+khanjar

and ...http://www.vikingsword.com/vb/showth...ht=Omani+terrs

and ... http://www.vikingsword.com/vb/showth...ht=Omani+terrs

Regards,
Ibrahiim al Balooshi.