Beeswax

drdavid · 9th December 2005, 11:17 PM

Hi
having been told by a couple of forum members that the Mandau that I have has a beeswax ferrule and then looking at a fairly ordinary piha ketta I have, I realised that the handle repair job on that was probably also beeswax. What suprises me is how hard that stuff can get. Can anyone enlighten me as to how this stuff is used and how it is 'cured' to make it so hard and strong.
cheers

VANDOO · 10th December 2005, 01:42 AM

NOT BEEING A BEE EXPERT I CAN ONLY GUESS

.
BEE KEEPERS USUALLY PUT MANUFACTURED BEES WAX COMBS IN THE HIVES OF DOMESTIC BEES SO THE BEES WILL SPEND MORE TIME MAKEING HONEY INSTEAD OF WAX. THE WAX OF A DOMESTIC HONEY BEE IS PROBABLY DIFFERENT THAN THAT OF A WILD BEE, ESPECIALLY IN A HOT JUNGLE CLIMATE LIKE BORNEO OR MALAYSIA. I WOULD GUESS IT WOULD TAKE MORE HEAT TO MELT IT AND WOULD BE DARKER AND LESS PURE THAN DOMESTIC BEE WAX OR MANUFACTURED WAX. I DON'T KNOW IF THE MATERIAL IS WAX OR NOT OR IF SOMETHING HAS BEEN ADDED TO WAX TO MAKE THE MATERIAL BEING USED. I HAVE READ SEVERAL PLACES THAT IT IS BEES WAX BUT NEVER ASKED A DAYAK SWORD MAKER OR HAD SOME TESTED SO THE ANSWER IS NOT KNOWN FOR SURE.

ETHINOGRAPHIC WEAPONS COLLECTING IS NOT A EXACT SCIENCE SO MUCH IS LOST OR UNKNOWN BUT WE LEARN IT LITTLE BY LITTLE.

drdavid · 11th December 2005, 12:52 AM

Hi all
I remembered I had a friend who keeps bees so I asked about the properties of beeswax and he told me quite a lot of interesting stuff including the fact that left to its own devices it will go very hard without any treatment at all. He said that if the beekeepers need to mould the wax they need to soak it for up to 24 hours to get it soft enough. Could not tell me if there was much difference between domestic and native bee wax other than more pollens,twigs etc in the wild stuff. He also pointed out that the mouthpiece of the indigenous australian instrument the digigeridoo which is very hard is made from beeswax. So I suspect that the beeswax on swords like the Mandau is just in its raw form and allowed to dry for a while to fully harden.

Battara · 12th December 2005, 08:52 AM

I've used beeswax to make a lip on my Australian didgeridoo (as opposed to a didgeridon't

). Let me tell you - it either has to be melted and poured, dipped, or diluted with something. Any other way does not work (except carving). Most of the time I have seen pitch rather than beeswax.

JeffS · 25th September 2020, 07:40 PM

Bumping this oldie with a question. Has anyone here used beeswax to fill insect holes in horn? Wondering if it would make a good "patch" material.

Tim Simmons · 25th September 2020, 08:35 PM

You need to mix beeswax with tree resin, various natural resins can be found with ease, you know where, I have not found one resin that much better than any other when mix with bees wax. Experimentation is needed in getting the correct mix to achieve the adhesive you want. You can make genuine authentic adhesives. It takes heat and careful handling for large quantities but even a small amount needs some preparation. Powdered charcoal is also an interesting addition depending on the job.

9th December 2005, 11:17 PM	#1
drdavid Member Join Date: Aug 2005 Location: Australia Posts: 371	Beeswax Hi having been told by a couple of forum members that the Mandau that I have has a beeswax ferrule and then looking at a fairly ordinary piha ketta I have, I realised that the handle repair job on that was probably also beeswax. What suprises me is how hard that stuff can get. Can anyone enlighten me as to how this stuff is used and how it is 'cured' to make it so hard and strong. cheers Attached Images

25th September 2020, 07:40 PM	#5
JeffS Member Join Date: Sep 2005 Location: Singapore Posts: 343	Bumping this oldie with a question. Has anyone here used beeswax to fill insect holes in horn? Wondering if it would make a good "patch" material. Attached Images

10th December 2005, 01:42 AM	#2
VANDOO (deceased) Join Date: Dec 2004 Location: OKLAHOMA, USA Posts: 3,138	NOT BEEING A BEE EXPERT I CAN ONLY GUESS . BEE KEEPERS USUALLY PUT MANUFACTURED BEES WAX COMBS IN THE HIVES OF DOMESTIC BEES SO THE BEES WILL SPEND MORE TIME MAKEING HONEY INSTEAD OF WAX. THE WAX OF A DOMESTIC HONEY BEE IS PROBABLY DIFFERENT THAN THAT OF A WILD BEE, ESPECIALLY IN A HOT JUNGLE CLIMATE LIKE BORNEO OR MALAYSIA. I WOULD GUESS IT WOULD TAKE MORE HEAT TO MELT IT AND WOULD BE DARKER AND LESS PURE THAN DOMESTIC BEE WAX OR MANUFACTURED WAX. I DON'T KNOW IF THE MATERIAL IS WAX OR NOT OR IF SOMETHING HAS BEEN ADDED TO WAX TO MAKE THE MATERIAL BEING USED. I HAVE READ SEVERAL PLACES THAT IT IS BEES WAX BUT NEVER ASKED A DAYAK SWORD MAKER OR HAD SOME TESTED SO THE ANSWER IS NOT KNOWN FOR SURE. ETHINOGRAPHIC WEAPONS COLLECTING IS NOT A EXACT SCIENCE SO MUCH IS LOST OR UNKNOWN BUT WE LEARN IT LITTLE BY LITTLE.

11th December 2005, 12:52 AM	#3
drdavid Member Join Date: Aug 2005 Location: Australia Posts: 371	Hi all I remembered I had a friend who keeps bees so I asked about the properties of beeswax and he told me quite a lot of interesting stuff including the fact that left to its own devices it will go very hard without any treatment at all. He said that if the beekeepers need to mould the wax they need to soak it for up to 24 hours to get it soft enough. Could not tell me if there was much difference between domestic and native bee wax other than more pollens,twigs etc in the wild stuff. He also pointed out that the mouthpiece of the indigenous australian instrument the digigeridoo which is very hard is made from beeswax. So I suspect that the beeswax on swords like the Mandau is just in its raw form and allowed to dry for a while to fully harden.

12th December 2005, 08:52 AM	#4
Battara EAAF Staff Join Date: Dec 2004 Location: Louisville, KY Posts: 7,219	I've used beeswax to make a lip on my Australian didgeridoo (as opposed to a didgeridon't ). Let me tell you - it either has to be melted and poured, dipped, or diluted with something. Any other way does not work (except carving). Most of the time I have seen pitch rather than beeswax.

25th September 2020, 08:35 PM	#6
Tim Simmons Member Join Date: Dec 2004 Location: What is still UK Posts: 5,807	You need to mix beeswax with tree resin, various natural resins can be found with ease, you know where, I have not found one resin that much better than any other when mix with bees wax. Experimentation is needed in getting the correct mix to achieve the adhesive you want. You can make genuine authentic adhesives. It takes heat and careful handling for large quantities but even a small amount needs some preparation. Powdered charcoal is also an interesting addition depending on the job.