Moro? Spear

Robert · 3rd April 2013, 10:16 AM

Hello everyone, this is my latest find. This I believe is Moro in origin but unfortunately it has had the shaft cut down (probably for ease in shipping) at some point. If I can come up with either a nice piece of palm wood or even a nice length of rattan it should be easy to make it complete without much effort. Any and all comments on its origin or recommendations on its restoration would be greatly appreciated. I cannot wait to see what might be hiding under the rust.

These are some of the better auction photos.

Best,
Robert

katana · 3rd April 2013, 03:39 PM

Hi Robert,
I had a few 'cut down' spears. To maintain the integrity of the pieces I 'added' a shaft to the remaining original shaft. This was achieved by drilling a central hole into the 'connecting' ends of the old and new shaft and fixing a dowel (wooden rod) into one of the holes forming a spigot. This allows easy connection /disconnection.

All the best
David

Robert · 3rd April 2013, 04:22 PM

Hello David, and thank you for your suggestion on the restoration of this piece. I was thinking of something very similar if I can find a matching piece of wood to make an extension to the original shaft. I thought like you have mentioned to drill a hole into the end of the existing piece and then turning the end of the new extension on a lathe so it would fit into the hole. Then a band of the same metal as the collar could be used to hide the seem. I will see if I can post a better photo of the remnant of wooden shaft in case you might be able help in its identification. Thanks again for your help.

Best,
Robert

kino · 4th April 2013, 02:42 AM

Hey Robert,
Congratulations, I just saw your title. Abuse the power

Here is a method in which a Budiak's shaft was cut for ease of transportation and put back together.

Robert · 4th April 2013, 02:51 AM

Kino, Thank you for the photo of the shaft repair. The main problem that I have with this spear is that the section of shaft that was cut off was not kept by who ever cut it down. Can you by chance identify the type of wood that was used on my example? I know that the photos that I have posted are not the best but until it arrives they are the only ones I have. The shaft on yours looks to be made of black palm wood to me, is this correct?

Best,
Robert.

P.S. Thank you for the congratulations and suggested use.

VANDOO · 4th April 2013, 06:43 AM

THE WOOD DOSEN'T LOOK LIKE PALM TO ME. THE INTERESTING THING ON YOUR SPEAR IS THE WAY THE SHAFT IS CUT AT AN ANGLE INSTEAD OF STRAIGHT ACROSS. IT LOOKS LIKE A SPEAR SHAFT CUT OFF WITH ONE STROKE OF A BLADE. UNLESS IT SHOWS SAW MARKS PERHAPS IT WOULD BE MORE INTERESTING AS IT IS, ESPECIALLY IF IT WAS SHORTENED IN BATTLE AND NOT FOR PACKING AND TRANSPORT. IF IT SHOWS SAW MARKS THEN REPLACEMENT WILL BE IN ORDER. GOOD LUCK ON THE BLADE MAY IT CLEAN UP NICELY.

kino · 5th April 2013, 04:15 AM

Quote:

Originally Posted by Robert

Can you by chance identify the type of wood that was used on my example? The shaft on yours looks to be made of black palm wood to me, is this correct?

I don't have the knowledge to ID the type of wood of your spear. Mine appears to be black palm wood.

3rd April 2013, 10:16 AM	#1
Robert EAAF Staff Join Date: Feb 2005 Location: Centerville, Kansas Posts: 2,196	Moro? Spear Hello everyone, this is my latest find. This I believe is Moro in origin but unfortunately it has had the shaft cut down (probably for ease in shipping) at some point. If I can come up with either a nice piece of palm wood or even a nice length of rattan it should be easy to make it complete without much effort. Any and all comments on its origin or recommendations on its restoration would be greatly appreciated. I cannot wait to see what might be hiding under the rust. These are some of the better auction photos. Best, Robert Attached Images Last edited by Robert; 3rd April 2013 at 10:41 AM.

3rd April 2013, 04:22 PM	#3
Robert EAAF Staff Join Date: Feb 2005 Location: Centerville, Kansas Posts: 2,196	Hello David, and thank you for your suggestion on the restoration of this piece. I was thinking of something very similar if I can find a matching piece of wood to make an extension to the original shaft. I thought like you have mentioned to drill a hole into the end of the existing piece and then turning the end of the new extension on a lathe so it would fit into the hole. Then a band of the same metal as the collar could be used to hide the seem. I will see if I can post a better photo of the remnant of wooden shaft in case you might be able help in its identification. Thanks again for your help. Best, Robert Attached Images

4th April 2013, 02:42 AM	#4
kino Member Join Date: Dec 2004 Posts: 1,004	Congratulations Hey Robert, Congratulations, I just saw your title. Abuse the power Here is a method in which a Budiak's shaft was cut for ease of transportation and put back together. Attached Images

3rd April 2013, 03:39 PM	#2
katana Member Join Date: Jan 2006 Location: Kent Posts: 2,653	Hi Robert, I had a few 'cut down' spears. To maintain the integrity of the pieces I 'added' a shaft to the remaining original shaft. This was achieved by drilling a central hole into the 'connecting' ends of the old and new shaft and fixing a dowel (wooden rod) into one of the holes forming a spigot. This allows easy connection /disconnection. All the best David

4th April 2013, 02:51 AM	#5
Robert EAAF Staff Join Date: Feb 2005 Location: Centerville, Kansas Posts: 2,196	Kino, Thank you for the photo of the shaft repair. The main problem that I have with this spear is that the section of shaft that was cut off was not kept by who ever cut it down. Can you by chance identify the type of wood that was used on my example? I know that the photos that I have posted are not the best but until it arrives they are the only ones I have. The shaft on yours looks to be made of black palm wood to me, is this correct? Best, Robert. P.S. Thank you for the congratulations and suggested use.

4th April 2013, 06:43 AM	#6
VANDOO (deceased) Join Date: Dec 2004 Location: OKLAHOMA, USA Posts: 3,138	THE WOOD DOSEN'T LOOK LIKE PALM TO ME. THE INTERESTING THING ON YOUR SPEAR IS THE WAY THE SHAFT IS CUT AT AN ANGLE INSTEAD OF STRAIGHT ACROSS. IT LOOKS LIKE A SPEAR SHAFT CUT OFF WITH ONE STROKE OF A BLADE. UNLESS IT SHOWS SAW MARKS PERHAPS IT WOULD BE MORE INTERESTING AS IT IS, ESPECIALLY IF IT WAS SHORTENED IN BATTLE AND NOT FOR PACKING AND TRANSPORT. IF IT SHOWS SAW MARKS THEN REPLACEMENT WILL BE IN ORDER. GOOD LUCK ON THE BLADE MAY IT CLEAN UP NICELY.