Coteng restoration project

alexish · 7th April 2018, 02:06 PM

Last year, I bought a wooden coteng with broken beak, that was attached to a pandai saras blade, without a sheath. I decided to send this to Madura for restoration, as well as to make a new sheath. I hereby attach pictures of the broken coteng in its original state.

alexish · 7th April 2018, 02:14 PM

Here are pictures of the broken coteng hilt after restoration.

alexish · 7th April 2018, 02:19 PM

Here are pictures of the entire sarung and blade, with and without additional metalwork.

alexish · 7th April 2018, 02:29 PM

I was so impressed by the restoration, that I got the same carver to make a brand new coteng with an old 9-luk pandai saras blade.

David · 7th April 2018, 06:16 PM

Alexis, i am a little confused. You are show two different keris blades here as well, i believe, what appears to be two different hilts as well.
If you are looking for feedback on the hilt with the silver selut and the wavy blade, the beak replacement looks fairly good (though the photos are not good enough to really be able to tell if the repair shows), but the silver work on the selut seems really poorly fitted. The sheath itself seems to me a correct form, but seems a bit off proportionately. That could just be the angle of the photography though.

alexish · 7th April 2018, 07:10 PM

Quote:

Originally Posted by David

Alexis, i am a little confused. You are show two different keris blades here as well, i believe, what appears to be two different hilts as well.
If you are looking for feedback on the hilt with the silver selut and the wavy blade, the beak replacement looks fairly good (though the photos are not good enough to really be able to tell if the repair shows), but the silver work on the selut seems really poorly fitted. The sheath itself seems to me a correct form, but seems a bit off proportionately. That could just be the angle of the photography though.

Actually, the 1st keris hilt is the restored antique piece (Posts 1, 2 & 3). The same Madurese carver who did the restoration subsequently attempted to carve a brand-new coteng hilt (second hilt, Post 4), using the 1st restored hilt (Posts 1, 2 & 3) as the template.

7th April 2018, 02:06 PM	#1
alexish Member Join Date: Jun 2017 Posts: 127	Coteng restoration project Last year, I bought a wooden coteng with broken beak, that was attached to a pandai saras blade, without a sheath. I decided to send this to Madura for restoration, as well as to make a new sheath. I hereby attach pictures of the broken coteng in its original state. Attached Images

7th April 2018, 02:14 PM	#2
alexish Member Join Date: Jun 2017 Posts: 127	After restoration Here are pictures of the broken coteng hilt after restoration. Attached Images

7th April 2018, 02:19 PM	#3
alexish Member Join Date: Jun 2017 Posts: 127	Here are pictures of the entire sarung and blade, with and without additional metalwork. Attached Images Last edited by alexish; 7th April 2018 at 02:33 PM.

7th April 2018, 02:29 PM	#4
alexish Member Join Date: Jun 2017 Posts: 127	New Coteng I was so impressed by the restoration, that I got the same carver to make a brand new coteng with an old 9-luk pandai saras blade. Attached Images

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

7th April 2018, 06:16 PM	#5
David Keris forum moderator Join Date: Aug 2006 Location: Nova Scotia Posts: 7,211	Alexis, i am a little confused. You are show two different keris blades here as well, i believe, what appears to be two different hilts as well. If you are looking for feedback on the hilt with the silver selut and the wavy blade, the beak replacement looks fairly good (though the photos are not good enough to really be able to tell if the repair shows), but the silver work on the selut seems really poorly fitted. The sheath itself seems to me a correct form, but seems a bit off proportionately. That could just be the angle of the photography though.