2nd November 2015, 08:03 PM | #1 |
Member
Join Date: Nov 2015
Posts: 6
|
Flintlock Pair, Need help Identifying
Hello all, I've been lurking around the forum for a couple days now looking for some information on a pair of flintlock pistols I am researching. I thought I would join and share what I have here. It is my hope that there may be a few of you that might know some information about these.
I honestly do not have much information about these so I will mostly let the pictures speak for themselves. I will answer any questions to the best of my ability and please request additional pictures if you would like to see more detail. Also I am aware that the topic of value is not to be discussed on the forum though it is my understanding that I may request that I be privately messaged on that topic? Thank you for looking |
4th November 2015, 04:09 PM | #2 |
Member
Join Date: Apr 2014
Location: Louisiana
Posts: 363
|
Although they look European at a first glance, I think they're Turkish made for export. One European characteristic is the separate ram rod. Also, the lock appears to be of better quality than most Eastern European/Balkan/Turkish guns I've seen.
The punch marks are cryptic, and I have not heard of the name stamped under the breech. The chasing or chisel work also is a strong indication of that region. Silver wire inlay, ditto. These appear to be of pretty good quality, and not the late slipshod work too often seen. I would like to see some close ups of the lock from both sides. |
4th November 2015, 05:51 PM | #3 |
Member
Join Date: Jun 2013
Posts: 2,145
|
I confirm French pistols for Turkish market.
For me the punch marks are silver proofs. Would be interesting to have the translation of the Arabic part... And also a photo of the locks from outside! If it's a true pair the value is increased... Kubur |
4th November 2015, 06:15 PM | #4 |
Member
Join Date: Jun 2013
Posts: 2,145
|
Could be also French pistols for Algerian market, anyway Ottoman
The inscription will say... The frizen is not from the Balkans. Pure pistols for export, very good quality indeed |
4th November 2015, 08:02 PM | #5 |
Member
Join Date: Apr 2014
Location: Louisiana
Posts: 363
|
The punch marks are absolutely not French silver marks. This is something I have dealt with for a long time.
The marks do not resemble those of any European country I know of. |
4th November 2015, 10:00 PM | #6 |
Member
Join Date: Jun 2013
Posts: 2,145
|
I agree for the punch marks especialy because one is 80 in Arabic numeral.
But i still think that's a French pistol for export, probably from Marseille. |
5th November 2015, 02:59 AM | #7 |
Member
Join Date: Nov 2015
Posts: 6
|
Thank you for your input.
I forgot to mention in my original post that I had the Arabic translated. I was told it reads the Arabic equivalent of "George Abraham" (or Ibrahim as its said in Arabic) with unconnected characters. Both pistols are marked with this name in the same location (underside of the grip). I also forgot to note that nearly every piece of sliver on both pistols is stamped the same as the picture I posted. ( a star, and what I also thought might be the Arabic numeral '80' ) I'm unable to upload addition pictures at this time but I will post some more detailed photographs tomorrow. If you look closely in the first picture you will notice both pistols have been defaced on the outside of the lock plate. I will get a close-up of this tomorrow. There is also quite a bit of engraving on top of the barrel I will try to photograph. It is a crescent moon surrounded by stars. |
5th November 2015, 05:12 AM | #8 | |
Member
Join Date: Apr 2014
Location: Louisiana
Posts: 363
|
Quote:
|
|
5th November 2015, 01:55 PM | #9 |
Member
Join Date: Jun 2013
Posts: 2,145
|
Ottoman Silver Marks
Kürkman, Garo Istanbul: Mathusalem Publications, 1996 English - 293 pages ISBN: 9789758129007 "A book by Garo Kürkman brings the tradition of silver marks and tughras, monograms of sultans in stylized script, into light.For centuries, during the expansion of the Ottoman Empire, it was obligatory for gold and silver wares to be assayed and stamped at the states gold mint. These marks are catalogued in the book titled “Ottoman Silver Marks.” The book contains a complete list of the Tugra marks of the sultans and other silver marks." |
6th November 2015, 12:31 AM | #10 |
Member
Join Date: Apr 2014
Location: Louisiana
Posts: 363
|
I don't have any references with Turkish marks. Rarely see any of that work here.
|
6th November 2015, 06:02 AM | #11 |
Member
Join Date: Nov 2015
Posts: 6
|
Here is a close-up of the locks.
Last edited by Chertbolt; 6th November 2015 at 11:39 PM. Reason: Forgot to re-size photos. |
6th November 2015, 04:40 PM | #12 | |
Member
Join Date: Jul 2010
Location: St. Louis, MO area.
Posts: 1,623
|
Quote:
Looks like the locks are invisible?? LOL. Hope you can Post close-ups of the locks. I agree with others here. These pistols are an excellent example of European made - for export to the Ottoman market. For all the reasons mentioned above. The stocks are copied from the French design, and the locks look very French, first to second quarter of the 19th Century. As mentioned, the lock internals are the typical higher quality found on Europen locks versus the more common Balkan made copies. And the non-serrated frizzen and full ramrods are also both give aways. Again, a textbook example of Europen made pistols decorated for the Ottoman market. A great pair. Rick. |
|
6th November 2015, 11:56 PM | #13 | |
Member
Join Date: Nov 2015
Posts: 6
|
Oh yes, I forgot to mention they have the special ability to become completely transparent. ...or maybe I just forgot to re-size the pictures and they didn't attach. I fixed it.
Quote:
Thank you all again for contributing to this thread. I had suspected they were European made for the Ottoman market with the prior research I had done before landing here. It is good to hear confirming opinions. |
|
7th November 2015, 02:49 AM | #14 |
Member
Join Date: Jan 2007
Posts: 803
|
I believe these pistols are Turkish/Ottoman, with European locks finished in the near east.
The trigger-guards do not look French to me, and the engraving isn't French either. For Turkish pistols, these are very high -end. Congratulations on finding them! Actually, going by the lock -work, they appear English locks.... Edited to correct my English lock bit! On looking at the lock-work again, I see detachable pans. more or less unheard of in England. |
7th November 2015, 10:19 AM | #15 |
Member
Join Date: Oct 2012
Location: Ionian Islands, Greece
Posts: 96
|
Hello,
The barrels are certainly French, the crowned AM is a St Etienne proof mark, and the name JEAN BROSARS appears in several examples, ca 1810. Andreas |
7th November 2015, 08:15 PM | #16 |
Member
Join Date: Jul 2010
Location: St. Louis, MO area.
Posts: 1,623
|
Did you perhaps mean false ramrods? Because they are definitely not functional or full in length. Unless you meant something else by full?
Oh, ok. They are the "short" ramrods. That is one of the two variations of the "false ramrod". Also, note the European style trigger vs the flat curl trigger usually encountered on the Balkan made pieces. Thanks for the pics of the locks, also decorated in Ottoman style for local tastes. Rick |
7th November 2015, 08:25 PM | #17 | |
Member
Join Date: Jul 2010
Location: St. Louis, MO area.
Posts: 1,623
|
Quote:
Yes, they could have been final assembled in the Balkans from European parts. Just the locks and barrels imported. But when I look at the European style triggers, along with everything else, I still believe these pistols were finished and assembled in Europe for export. The engraving on the trigger guards look typical generic Ottoman/Balkan. And could have easily been done in Europe, or locally since the guards appear to be iron forgings. And I see what you mean by the locks. They have both English and French styling cues. Hmmm. Rick. |
|
7th November 2015, 08:26 PM | #18 | |
Member
Join Date: Jul 2010
Location: St. Louis, MO area.
Posts: 1,623
|
Quote:
Rick. |
|
7th November 2015, 09:59 PM | #19 | |
Member
Join Date: Nov 2015
Posts: 6
|
Quote:
Would you mind sharing where you have seen this proof mark documented? I am also very interested in knowing more about Jean Brosars and where you have seen other examples baring his name. Any information would be of great help. My mother is an experienced genealogical researcher and is working on this name as well as the Arabic inscription of 'George Abraham' to try and find more information. She did find a Syrian man by the name of George Abraham that lived 20 minutes away from the earliest known owner of these pistols, whom would be my uncles father. Though we have not found any solid connections to say for certain that this is the same George Abraham. Will update as we find more information. For now here are some more pictures. |
|
8th November 2015, 09:41 AM | #20 | |
Member
Join Date: Oct 2012
Location: Ionian Islands, Greece
Posts: 96
|
Quote:
HTML Code:
http://www.passionmilitaria.com/t91622-vos-avis-sur-differents-pistolets-anciens HTML Code:
http://www.passionmilitaria.com/t63478-restauration-pistolet-1er-empire Andreas Last edited by Andreas; 8th November 2015 at 10:59 AM. |
|
8th November 2015, 01:41 PM | #21 |
Vikingsword Staff
Join Date: Dec 2004
Location: The Aussie Bush
Posts: 4,194
|
Thank you Andreas. Excellent sources and directly relevant to the items under discussion. Chertbolt now has an answer to his question as to where these were made and by whom. As he correctly noted in his original post, any discussion of the value of his pistols needs to be via email or PM.
Ian. |
8th November 2015, 02:15 PM | #22 |
Member
Join Date: Jan 2007
Posts: 803
|
Ian,
I think Chertbolt has an answer to where the barrels and locks were produced, but still believe these pistols were made and certainly engraved in the Near East. They are very good for that area, but without wishing anyone to think I am finding fault with them, the finish and engraving is not up to even middling French standards. I find it very difficult to believe that a French gunsmith could work down to this level of workmanship. Please do not take this as a derogatory remark. I really Do believe that these are Good quality, better by far than average for that area of the world. |
8th November 2015, 03:33 PM | #23 | |
Vikingsword Staff
Join Date: Dec 2004
Location: The Aussie Bush
Posts: 4,194
|
Good point Pukka.
Quote:
|
|
8th November 2015, 04:55 PM | #24 | |
Member
Join Date: Jul 2010
Location: St. Louis, MO area.
Posts: 1,623
|
Quote:
Well, it's interesting what a few more photos can do to the decision making process. LOL. I must say that after viewing these additional photos, that I comepletely agree with your assessment. It does in fact appear that the lock and barrel were shipped from France/Europe for final assembly somewhere in the Balkans/Ottoman Empire. As you mention, the chisel work, engraving, quality of the iron mounts, and even the inletting is not up to European standards. But is typical of what you would see on these pistols if locally assembled. Great observations on your part. However, yes, this pair of pistols are a really nice example of the locally made Kubur pistols utilizing a European lock and barrel. It's great that Andreas was able to identify the barrels. Thiss has been a fun Thread. Rick. |
|
9th November 2015, 12:57 AM | #25 |
Member
Join Date: Jan 2007
Posts: 803
|
Hi Rick,
What threw me a bit, is that I only knew of the newer St Etienne proofs, which are AR crowned.....not AM. Thanks to Andreas for filling me in on this point! Lovely to get pistols with such high quality locks. Very nice indeed. |
10th November 2015, 06:59 PM | #26 | |
Member
Join Date: Nov 2015
Posts: 6
|
Andreas, thank you for those links! It was fun to see other examples with the Brosar name and even the same proof mark!
I did find this online book that mentions Auguste Merley, Though I do not read French so I'm not exactly sure what it says about him. I also discovered the Saint Etienne proof house is still in operation. Saint Etienne Website Thank you again to all that have contributed to this thread! Quote:
|
|
13th November 2015, 04:06 PM | #27 | |
Member
Join Date: Jul 2010
Location: St. Louis, MO area.
Posts: 1,623
|
Quote:
What lead me astray is the European style triggers. You very rarly see this trigger on these pistols. It's usually the simple, flat trigger with the curl at the bottom. Of course, the triggers themselves could have been imported. But the additional photos make it obvious these were assembled locally. Nice pair of pistols, and a fun Thread. Rick. |
|
|
|