Ethnographic Arms & Armour - View Single Post - Dha-Lwe average measurements please

Mark · 20th July 2007, 03:00 AM

I finally took detailed measurements of two of my dha of this style. The first is the one in your first post (DRI #0049; HOS #250).

Blade length: 50 cm
Handle length: 31 cm
Blade Width (height)
at base: 10 mm
at narrowest point (about 8 cm from base): 26 mm
at widest point (essentially at the tip): 40 mm
Spine thickness
at base: 10 mm
at 1/3 length: 4 mm
at 2/3 length: 2.4 mm
1 cm from tip: 1.5 mm

As you can see, the blade taper is very dramatic at first, going from 10 mm to 4 mm over the first 1/3 of the blade, then quite gradual for the rest of the blade.

Then I went kind of crazy and made detailed measurements of the handle sections, noted in the photo below (all measurements are in millimeters).

20th July 2007, 03:00 AM	#9
Mark Member Join Date: Dec 2004 Posts: 987	I finally took detailed measurements of two of my dha of this style. The first is the one in your first post (DRI #0049; HOS #250). Blade length: 50 cm Handle length: 31 cm Blade Width (height) at base: 10 mm at narrowest point (about 8 cm from base): 26 mm at widest point (essentially at the tip): 40 mm Spine thickness at base: 10 mm at 1/3 length: 4 mm at 2/3 length: 2.4 mm 1 cm from tip: 1.5 mm As you can see, the blade taper is very dramatic at first, going from 10 mm to 4 mm over the first 1/3 of the blade, then quite gradual for the rest of the blade. Then I went kind of crazy and made detailed measurements of the handle sections, noted in the photo below (all measurements are in millimeters). Attached Images Last edited by Mark; 20th July 2007 at 03:23 AM.