Ethnographic Arms & Armour

Ethnographic Arms & Armour (http://www.vikingsword.com/vb/index.php)
-   Keris Warung Kopi (http://www.vikingsword.com/vb/forumdisplay.php?f=11)
-   -   Tajong for viewing pleasure and comments ! (http://www.vikingsword.com/vb/showthread.php?t=10609)

mykeris 11th August 2009 02:55 PM

Tajong for viewing pleasure and comments !
 
6 Attachment(s)
This Tajong is relatively short with total length of 52 cm. The hilt is made of Kenaong Merah with short blade Pandai Saras Luk 1. Appreciate what ever your kind comments are, TQ in advance. Mykeris.

mykeris 11th August 2009 03:08 PM

Additional pics.
 
5 Attachment(s)
For your viewing pleasure.

BluErf 11th August 2009 03:10 PM

Small sized, but every thing is in good proportion. The hilt is quite inspired, in my opinion. Adheres to the "rules" of what makes a tajong a tajong, but at the same time, bending them and reinterpreting in the carver's own style. A mark of a talented carver. :)

BluErf 11th August 2009 03:12 PM

I believe the nose is a replacement. :) Nicely done.

BluErf 11th August 2009 03:15 PM

Some of the surface of the tajong suggests that it may have been sanded down or polished to a certain extent. Too flat in some places. May have been an attempt to remove the old sapan.

mykeris 11th August 2009 04:08 PM

More close-ups
 
6 Attachment(s)
More close-ups

Sajen 11th August 2009 04:57 PM

Nice hilt, I don't think that it is inspired.
Can we see the complete blade please?

sajen

mykeris 11th August 2009 05:21 PM

Pics on blade
 
3 Attachment(s)
Blade Length: Ganja to blade tip 36 cm

Alam Shah 11th August 2009 05:40 PM

Quote:

Originally Posted by BluErf
I believe the nose is a replacement. :) Nicely done.

I suppose so.. with a sudden termination of carvings, when it reaches the nose.. it looks like a hybrid of the bangsa agong and a typical later form, perhaps.. :confused:

Sajen 11th August 2009 06:10 PM

Quote:

Originally Posted by mykeris
Blade Length: Ganja to blade tip 36 cm

Hello Mykeris,

thank's for the pictures of the blade. The blade is curved but not one luk, my two cents worth estimation.;)

Regards,

sajen

mykeris 11th August 2009 10:33 PM

Another blade
 
2 Attachment(s)
Thanks and sincerely noted. Another sample with blade 41 cm.

Sajen 11th August 2009 11:09 PM

Quote:

Originally Posted by mykeris
Thanks and sincerely noted. Another sample with blade 41 cm.


Yes, I see why you call the first one "1 luk" but normally the lowest luk is three.

Regards,

sajen

David 11th August 2009 11:45 PM

I don't know, from this last group of close-ups it looks like the grain and tone of the wood lines up pretty well. I would be seriously impressed if the nose on this tajong is a replacement. :shrug: :)

BluErf 12th August 2009 01:45 AM

I've seen a few tajongs with such 'surgical' replacements, and I've always been impressed by how well the replacement is done! But of course, for this case, I am only guessing from the pics; perhaps Mykeris can look at it more closely and let us know? :)

BluErf 12th August 2009 01:47 AM

Quote:

Originally Posted by Alam Shah
it looks like a hybrid of the bangsa agong and a typical later form, perhaps.. :confused:

Yes, that's why I say it is inspired. :) But it is undoubtedly done by somebody who is very familiar with the tajong.

Sajen - I think you may need to see more tajongs to notice the subtlety. :)

BluErf 12th August 2009 01:58 AM

Quote:

Originally Posted by mykeris
Blade Length: Ganja to blade tip 36 cm

Yep, it's curved, but I don't know whether people up north really do consider this 1 luk. More likely straight. I had a keris from this region with a similar curved profile. Actually, come to think of it, the profile at the base of the blade is quite similar.

Notice the temper mark, which is a chevron shape. It has a name, which I cannot recall now.

David 12th August 2009 02:39 AM

Quote:

Originally Posted by BluErf
I've seen a few tajongs with such 'surgical' replacements, and I've always been impressed by how well the replacement is done! But of course, for this case, I am only guessing from the pics; perhaps Mykeris can look at it more closely and let us know? :)

I have little doubt that such surgical replacement can be done...but i would still be mightily impressed. :cool:
I'd love to know what you do call that chevron temper mark. I have a blade with a similar line. :)

BluErf 12th August 2009 02:39 PM

During the course of the day, two words popped up... "pucuk rebung". :)

mykeris 12th August 2009 02:53 PM

Additional sampling
 
2 Attachment(s)
Perhaps this would help.

David 12th August 2009 03:42 PM

Well, in these last 2 pics it does look like a replacement.
What are your thoughts with the hilt in hand Mykeris?

Sajen 12th August 2009 11:55 PM

Quote:

Originally Posted by BluErf
Yes, that's why I say it is inspired. :) But it is undoubtedly done by somebody who is very familiar with the tajong.

Sajen - I think you may need to see more tajongs to notice the subtlety. :)


Hello BluErf,

you are correct, I know nearly nothing about Tajong keris. ;)
But I have learned and have been remembered from Mr. Maisey some time ago that it isn't possible to have "one luk" keris.

We cannot have a one luk keris; lowest count must be three.

You begin the count on the first luk above the gandik and finish the count on the same side of the blade, thus lowest number of luk can only be three.


But maybe I am wrong by this and this "rule" isn't valid by Tajong keris?
I know that you have a great experience by Tajong keris and I appreciate your knowledge very much, so please teach me by this.
Sincerely,

sajen

A. G. Maisey 13th August 2009 12:22 AM

Any person, or group of people, can decide how they wish to refer to anything.

If a person, or group of people, wish to refer to a keris with no luk, but with a blade that is clearly lurus as "luk satu", well, so be it. That is their decision.

However, according to what I have been taught, there is no such thing as "luk satu".

One luk does not exist, and logically cannot exist.

But anybody at all is entitled to his own opinion.

PenangsangII 13th August 2009 04:16 AM

I agree.... there's no such thing as luk satu....... and i believe it's just a recently concocted terminology......

Alan, do you think that the keris had undergone reshaping works / besutan esp at the sorsoran, to be precise, reshaping the worn out blade to display perfect ri pandan and other fret works?

A. G. Maisey 13th August 2009 05:56 AM

I don't know.

The sorsoran does look a bit clumsy and rigid, but whether this is the maker's inadequacy, or whether it is evidence of somebody having a bit of a fiddle, I wouldn't like to say, especially from a photo.

mykeris 13th August 2009 06:41 AM

Additional pics of blade.
 
3 Attachment(s)
Hi David, I ll comeback to our question later. Regards, Mykeris.

PenangsangII 13th August 2009 07:13 AM

Thanks for uploading the clearer picture of the fret works, mykeris.

looking at the blade as whole, I think it is out of proportion, especially at the sorsoran..... it doesnt widen harmoniously as a keris blade (dapur pandai saras) should be...... since this blade is quite old and dressed in Tajong hulu and sheath, I dont think it's due to the empu's inadequacy - rather, my theory is, somebody may have fiddled the blade to look good (some times to fetch a higher price).... But of course, I am not too sure about this :shrug:

mykeris 13th August 2009 02:53 PM

Thanks for your comments.
 
Thanks for all your comments. Through close magnifying, the hilt looks to me so natural to show that the nose is not a replacement. However, it looks so odd when the carving stops unfinished and thats raised many questions. Probably, its a trend or the carver's trade mark or etc...Bluerf, you raised strong points and you are so observant, keep it up friend, ...I always overlooked on details.

As for the blade, I totally agree with Alan but will leave it to the Universe to decide. p/s: I will be posting another one for your viewing pleasure. Regards, Mykeris.

BluErf 14th August 2009 04:50 PM

Quote:

Originally Posted by Sajen
Hello BluErf,

you are correct, I know nearly nothing about Tajong keris. ;)
But I have learned and have been remembered from Mr. Maisey some time ago that it isn't possible to have "one luk" keris.

We cannot have a one luk keris; lowest count must be three.

You begin the count on the first luk above the gandik and finish the count on the same side of the blade, thus lowest number of luk can only be three.


But maybe I am wrong by this and this "rule" isn't valid by Tajong keris?
I know that you have a great experience by Tajong keris and I appreciate your knowledge very much, so please teach me by this.
Sincerely,

sajen

Hi Sajen,

I wasn't talking about the keris blade; I was referring to the hilt being inspired. :)

Personally, I am not really bothered about the luk one or lurus thing, but I believe up North, they don't really refer to such blades as luk one. :)

BluErf 14th August 2009 04:54 PM

Quote:

Originally Posted by mykeris
Thanks for all your comments. Through close magnifying, the hilt looks to me so natural to show that the nose is not a replacement. However, it looks so odd when the carving stops unfinished and thats raised many questions. Probably, its a trend or the carver's trade mark or etc...Bluerf, you raised strong points and you are so observant, keep it up friend, ...I always overlooked on details.

As for the blade, I totally agree with Alan but will leave it to the Universe to decide. p/s: I will be posting another one for your viewing pleasure. Regards, Mykeris.

Hi Mykeris,

The tajong hilt's nose has a metal sleeve? It seems so from the last 2 pics you have posted. I can't tell whether the nose is a replacement for sure, but just do note that sometimes, some of these old repairs are so perfectly fitted, that one can hardly notice! But of course, I'm not doubting your observation, especially with the aid of a magnifying glass. :)

BluErf 14th August 2009 04:57 PM

Oh wait a minute, its a different tajong you're showing us. This one's rougher compared to the 1st one you showed us.


All times are GMT +1. The time now is 03:20 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Posts are regarded as being copyrighted by their authors and the act of posting material is deemed to be a granting of an irrevocable nonexclusive license for display here.