![]() |
Too crude to be a Machete ?
6 Attachment(s)
I don't recall posting this one before; sorry if i did :o.
Too basic to pretend that it is artificially old. Yet the previous owner (seller) gave it a strong clean up, as may be noticed. So pretty old it migh be. I just don't abandon the idea that this might be a weapon and not just a tool, because of that clip point. What do you Gentlemen think of this thing ? . |
1 Attachment(s)
Fernando, you are the master of bringing bizarre anomalies to 'show and tell' !
This 'item' is indeed 'crude' but 'too crude' for a machete, NOT. Most machetes are inherently crude as they are often fashioned from materials and components either handy to the village blacksmiths. Often repurposed blades and components might be used, but this is clearly locally forged. Naturally this character is typical in so many of the tools, weapons etc. in Spanish colonial context, but of course, also in the rural regions in Portugal and Spain. Many of the 'cutlasses' used aboard vessels in the 17th-18th c. came from Basque field tools, i.e. machetes. Actually, as we have often discussed, there is virtually little distinction between weapon and tool, and machetes are the classic example. The well known 'espada ancha' of Spains colonies in the northern frontiers of Mexico was actually never called that, but what known for exactly what it was...a machete. While many used the dragoon blades from swords, it became well known that the heavier locally forged blades were better for their actual use, brushing trails etc. Many of these blades locally made had a distinctive feature, which was actually 'uptick' at the blade tip. It would seem these had some sort of purpose in the utilitarian function of the machete, which I am not qualified to describe, however its presence was placed with purpose. With that I would note the peculiar feature in the blade tip may have some remote association to the character of many machete blades. The length of this blade @ over 30 inches gives it good length for effective use, and while the thin (2") width seems questionable with most machetes having wide, stout blades....a solid iron blade narrow would be easier to wield. The Cuban machetes known as guanabacoa have even narrower blades in some examples. This is obviously excavated, and of considerable age, seeing the inner impurities of the iron working out through the surface in reaction to minerals in the soil or its deposit context. |
Quote:
|
Quote:
|
Quote:
|
Quote:
|
2 Attachment(s)
Quote:
My examnple: A 'narrow' Spanish military machete model 1881, made in Toledo 1895, a 'souvenir' of the Spanish-American war, used by the Spanish troops in Cuba. slightly recurved. Makes me think of Teddy Roosevelt & San Juan Hill... Also, another spanish pioneer machete from the same era... |
Machete ... ma non troppo.
The Spanish pattern 1881, followed by the 1891 for the 'Ejercito de Cuba', were factory made side arms for regular forces. I am afraid that, although they are called Machetes, they certainly fall out the discussed context; perhaps belonging more into the Militaria area :o.
|
Excellent and fascinating examples Wayne!
While of course spending most focus on historical swords and edged weapons of earlier times, these examples, though often deemed somewhat scornfully by many collectors of antique arms as 'militaria' have their own intrinsic value historically. When I first began collecting as a young boy, I went into war surplus stores, WWII had been over barely a decade, and old military gear provided us with the camping equipment we used. There were old bayonets literally in barrels, and could be bought for 'loose change'......my exact 'budget'. As I bought these, I became curious on the differences between the various forms, and nationalities etc. ........this was the root of my obsession with the study of edged weapons as I sought any references to identify them over the years. I remember many years later, the late RDC Evans was writing articles solely on bayonets in an arms magazine, and I read this in amazement as he descriptively placed wonderful perspective on these common and ubiquitous arms. He became a good friend and remarkably, showed that a great deal of key information that pertained to markings etc. applied to swords, bringing new dimension to my appreciation of the larger scope of arms study. I am not particularly drawn to guns, however I cannot describe the numbers of times I have found the clues and answers to questions regarding edged weapons in firearms references. The Spanish American war was an intriguing conflict which provided the circumstances which brought resolution to many mysteries in the study of Spanish colonial edged weapons, with those of Cuba and connected as far as the Philippines. As Fernando notes, these factories were producing edged weapons for military forces, and often bayonets and 'machetes' fell into close association as the utilitarian function was typically most required. No stone left unturned in serious arms study :) |
Wayne not minding ...
You and your way, Jim. I appreciate listening to your collecting experiences during youth but, aren't we missing the point ? This topic, as submitted, being weaving considerations over artisanal machetes, is it within context comparing their variable specs. with a mass produced example like the 1881 military pattern ... whether you find it an excellent and fascinating example ?
PS I later saw that you edited your post; sorry, too late ! |
I knew you'd be comin' Fernando, so I always go back and recheck to 'fine tune', even though never quite out of reach. :)
I guess its important to note that I am mostly interested in the historic aspects of arms, so of course I tend to find most items of some notable age 'fascinating' in one degree or another. Also, having noted that my 'collecting and study' of weapons spans back to my youth, a most considerable number of years, it is hard to resist some degree of analogy in writing. I think it is highly typical of men my age to be unapologetic story tellers, just ask the grandkids! In positive notes on weapons being discussed, I always recall hearing of one of the most highly respected of the early collector/scholars, Sir Guy Laking, of whom it was said, "...he would always find something kind to say about a fellow collectors object, however humble it was". I see these weapons even in the 'militaria' class as interesting in their own right, just as are most items presented in this miscellania forum, which allows presentation outside the chronological boundaries of the others. I suppose sort of a mantra, and that was written by Mr. Claude Blair, a kind man and brilliant scholar, who always had time to answer questions and it seems, followed in much the same manner. It seems that 'my point' was about what inspired me to pursue the study of weapons, and while identifying them by comparitive differences, learning the history of them in thier use. |
Quote:
- |
Kronckew's lower example's handle is vaguely reminiscent of the machete in post Spanish(?) Machete Sword with horn grips.
As far as this post's original example goes, I have been perplexed by what looks like a small diameter piece of pipe welded to the blade as a tang or uncomfortable handle. Even weirder is the apparent split down the back if the blade?? Is this iron forge welded around the steel edge with the line being a cold shut welding flaw? I have looked at this every day and just scratch my head. I've seen a lot of homemade agricultural knives for different crops and uses. This one is an interesting and unique curio. We seem to be developing a machete data base in this forum as of late. |
2 Attachment(s)
I don't have the luggage to exchange ideas on the handle fixation nor on the blade forging method, but i see that the handle length (only) fits a small grip like mine. It could be that this was the only piece of pipe the owner (smith) had at hand. I did post the blade split picture in purpose to call attention, but only now i notice that this happens in both sides, as both forte edges have the same thickness in the first third section.
- |
Many scythes, and 'clearing' or cropping implements had hafts, thus were mounted on these or perhaps even longer, in the manner of pole arms.
Recalling the idiom, 'swords into plough shares' which reflects the cases of weapon into tool, or clearly vice versa, as glaives, bill hooks and the like. Whatever the case with this item, it is fascinating for its rustic character and clearly obvious age, its 'mystery' not withstanding. The handle is perhaps not viable for most modern hands, if indeed this was the intent, but overall the hands of individuals centuries ago much as their physical size and structure was generally smaller. However, the 'socket' idea seems quite plausible. |
3 Attachment(s)
I can see what you mean, Jim. However i doubt that this thing once had a haft. The handle has an elliptical cross section, the usual shape of a grip, and it doesn't look like it has been previously round, like for a socket. Nor could its diameter fit one ... i would say.
. |
Quote:
Was this item buried at one time? |
I see what you mean, and I hadnt noticed the elliptical shape. As a rather crudely formed blacksmith work, as you note the flatter shape rather than round would seem more suited as a 'handle'. Certainly is a conundrum, and an intriguing one.
|
3 Attachment(s)
Quote:
Quote:
. |
Unless ...
Unless the blade was originally designed (forged) with its own tang, to support a 'conventional' handle; a tang that might have accidently broken, and only then a piece of pipe was used to regain its handling ability.
Just a fantasy, of course :o. |
Quote:
|
All duly noted, thank you.
|
All times are GMT +1. The time now is 03:04 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Posts are regarded as being copyrighted by their authors and the act of posting material is deemed to be a granting of an irrevocable nonexclusive license for display here.