![]() |
PAGE 7 MISSING. POSTS #181 TO #210
. |
Old 19th November 2011, 04:06 PM #211
Posted by: fernando Lead Moderator European Armoury Join Date: Dec 2004 Location: Portugal Good addition Denis . . |
Mark in a polearm
1 Attachment(s)
Old 24th November 2011, 01:32 PM #201
Psted by: fernando Lead Moderator European Armoury Join Date: Dec 2004 Location: Portugal This is a mark punched in an Italian Bisarma (Roncone) said to be from the XVI century, in discussion here: http://www.vikingsword.com/vb/showt...9094#post129094 I wonder whether some of our members is familiar with this mark, apparently a stylized P. Would be much obliged for any ideas ! .. Maybe someone with Armi Bianche Italiane by Boccia & Coelho ? . |
Old 25th November 2011, 05:55 AM #213
Posted by: TVV Member Join Date: Dec 2004 Location: Bay Area To add to the thread, I am attaching a photo of a GENOA mark on a blade, hilted with a Sinai/Negev bedouin hilt. Pictures of the entire sword are available here: http://vikingsword.com/vb/showpost....42&postcount=16 . |
Old 29th November 2011, 01:43 AM #214
Posted by: Jim McDougall EAA Research Consultant Join Date: Dec 2004 Location: Route 66 Originally Posted by fernando This is a mark punched in an Italian Bisarma (Roncone) said to be from the XVI century, in discussion here: http://www.vikingsword.com/vb/showt...9094#post129094 I wonder whether some of our members is familiar with this mark, apparently a stylized P. Would be much obliged for any ideas ! .. Maybe someone with Armi Bianche Italiane by Boccia & Coelho ? (Quote) . Thank you for adding this Fernando and I appreciate its being added here for the benefit of our study of markings. As has been indicated by Michael in the original thread it would seem most likely that this would be from the workshops of Peter Pogl in Thorl, early 16th century. He was armourer for the Emperor Maximilian. In Italy a majescule P surmounted by a crown in known 16th century, very much the period for these gisarmes. . |
Old 29th November 2011, 02:00 AM #215
Posted by: Jim McDougall EAA Research Consultant Join Date: Dec 2004 Location: Route 66 Originally Posted by TVV To add to the thread, I am attaching a photo of a GENOA mark on a blade, hilted with a Sinai/Negev bedouin hilt. Pictures of the entire sword are available here: http://vikingsword.com/vb/showpost....42&postcount=16 (Quote) Thank you for posting this here Teodor, and I really appreciate having these various examples of markings added to this thread. The status of the Genoa marking as an indicator of quality on trade blades which travelled widely through many cultures trade networks has been long established. In earlier times the familiar sickle marks (dentated half circles) became associated with Genoa as the origin of the blades bearing them. This was primarily due to the fact that the name Genoa was often placed between these double arcs...it seems actually the arcs were more of a guild related symbol and blades from a number of North Italian centers carried them. Genoa was primarily the port of departure. These blades and thier markings profoundly influenced other blade making centers such as Styrian and later becoming the well known 'gurda' markings of blades in the Caucusus. Solingen often used them along with other marks and symbols. These double marked 'Genoa' names are seen on usually East European sabre blades, which often entered Arabian trade routes and were highly favored. In this case, these are clearly native applied on a well worn trade blade, but reflecting the long standing admiration for blades carrying this famed trade center's name. . |
Old 30th November 2011, 12:51 AM #216
Posted by: TVV Member Join Date: Dec 2004 Location: Bay Area Originally Posted by Jim McDougall Thank you for posting this here Teodor, and I really appreciate having these various examples of markings added to this thread. The status of the Genoa marking as an indicator of quality on trade blades which travelled widely through many cultures trade networks has been long established. In earlier times the familiar sickle marks (dentated half circles) became associated with Genoa as the origin of the blades bearing them. This was primarily due to the fact that the name Genoa was often placed between these double arcs...it seems actually the arcs were more of a guild related symbol and blades from a number of North Italian centers carried them. Genoa was primarily the port of departure. These blades and thier markings profoundly influenced other blade making centers such as Styrian and later becoming the well known 'gurda' markings of blades in the Caucusus. Solingen often used them along with other marks and symbols. These double marked 'Genoa' names are seen on usually East European sabre blades, which often entered Arabian trade routes and were highly favored. In this case, these are clearly native applied on a well worn trade blade, but reflecting the long standing admiration for blades carrying this famed trade center's name. (Quote) Thank you Jim. The blade as far as I know (since it is not in my possession) does not have any other markings. Could it have been made with no markings initially, if we are to assume that the markings were applied at a later stage, or is it possible that this is a native blade as well, for example from the Caucasus? Teodor . |
Old 30th November 2011, 01:49 AM #217
Posted by: Jim McDougall EAA Research Consultant Join Date: Dec 2004 Location: Route 66 Originally Posted by TVV Thank you Jim. The blade as far as I know (since it is not in my possession) does not have any other markings. Could it have been made with no markings initially, if we are to assume that the markings were applied at a later stage, or is it possible that this is a native blade as well, for example from the Caucasus? Teodor (Quote) Hi Teodor, As far as I know there were numerous blades from Caucasian areas and Solingen issued as blanks and were often marked by vendors, importers etc. in trade centers as received and mounted. The very incongruent arrangement of the lettering suggests of course somewhat inept copying of earlier similarly fullered blades from East Europe with the dual Genoa marks. These blades might have entered at many points into the Red Sea trade sphere, and could have been passed around for generations much as kaskara blades and takouba blades were. All the best, Jim , |
Gurda
Old 30th November 2011, 08:47 AM #218
Posted by: Gavin Nugent Member Join Date: Oct 2007 Posts: 2,409 Jim, Interestingly enough Marian Glosek "Miecze srodkowoueropejskie X-XV w. was mentioned by Berber Dagger in a swap forum. I thumbed through the book with a little more interest after this post surfaced again and found within the pages and pages and pages of trade marks from the X-XV centuries, of real interest is the back to back cresents like the Gurda marks except that the 'teeth' are not present....it is seen in figure 53. My mind wanders to fanciful places sometimes but perhaps it is an earlier EU guild mark that developed to what it is with the teeth. Gav , |
Old 1st December 2011, 03:05 AM #219
Posted by: Jim McDougall EAA Research Consultant Join Date: Dec 2004 Location: Route 66 Thanks so much for the input Gav, and well placed thoughts on the development of these marks, which seem to be shrouded in mystery as to thier actual origin and development though North Italy seems the most accepted region. These also occur in varied configurations in many Italian blades, most of the arcs do seem to be dentated however. Good to temporally travel to fanciful places....often there lurk the answers ! All the best, Jim . |
Old 9th December 2011, 02:16 AM #220
Posted by. Jim McDougall EAA Research Consultant Join Date: Dec 2004 Location: Route 66 The arm extending from the cloud brandishing a sword is a decorative device often seen on blades of 17th and 18th c. and came up in a concurrent thread (diamond design in hilt) while discussing certain similarities in motif corresponding to arcane symbolism. The tarot art showing the 'wands' (suit of clubs) has an arms extending in this manner with a wand. Any other examples of this arm and sword device and thoughts on what it might represent.....associations to tarot type symbolism? . |
Old 24th December 2011, 09:22 AM #221
Posted by: Jim McDougall EAA Research Consultant Join Date: Dec 2004 Location: Route 66 For those readers interested in the use of the Greek cross in varying forms on early blades and often inscriptions from as early as medieval period..please see "European Bladed Takouba" on the ethnographic forum. The topic had been cross posted on the European Armoury forum as well, but the discussion has developed on the ethnographic. While always hoping more data will be added here on examples etc. I will try to add updates as well. Most important to realize is that these crosses, as well as the 'cross and orb' are devices which were added to blades apparantly talismanically. In earlier times crosses were added to scabbards of swords to protect them from about Charlemagnes time, and the practice seems to have moved to the blades as well. These were typically inlaid, often with yellow metal either brass or copper, and while often part of inscriptions or devotional phrases either opening and closing or singly, they apparantly became used independantly. The first illustration is the blade of an apparant 14th century sword with the type cross known in heraldry as the 'cross crosslet'..stated to actually represent four Latin type crosses together. The second is on the blade of a remarkable takouba posted by Iain in the thread noted, and the heraldic term for this type of forked end cross is known as 'fourchee' (forked). While the markings compendium attached in next illustration states date of 1590 for the marking, it was clearly used centuries prior to this 'recorded' date. These compendiums of markings seem typically to reflect known marks from actual collected specimens of weapons and not particularly to specific makers in most cases. This is because these kinds of 'magical' or 'talismanic' devices were widely used in conjunction with other markings and or inscriptions not necessarily indicative of a specific maker. . |
Old 22nd February 2012, 07:34 PM #222
Posted by: Jim McDougall EAA Research Consultant Join Date: Dec 2004 Location: Route 66 Hoping that possibly more might be added on the arm in the clouds, and possible tarot card association in the style of the artwork. All the best, Jim . |
Makers Mark
Old 7th April 2012, 05:20 PM #223
Posted by: DaveA Member Join Date: Apr 2007 Location: California. Makers Mark: Carl Eickhorn, Solingen, Germany Carl Eickhorn, Solingen, Germany changed their name three times and their trademark (Maker Mark) at least four times between 1865 and 1972 CARL EICKHORN (1885- 1886) CARL EICKHORN & COMPAGNIE (1886-1921) CARL EICKHORN WAFFENFABRIK (1921-1972) . |
Maker Marks
Old 7th April 2012, 05:23 PM #224
Posted by: DaveA Member Join Date: Apr 2007 Location: California. Maker Marks: Weyersburg, Kirsschbaum & Company Weyersburg, Kirsschbaum & Company, Solingen Germany (commonly referred to as WKC) changed their company name at least three times between 1883 and 1970 WEYERSBURG, KIRSCHBAUM & COMPAGNIE (1883-1930) WKC STAHL-UND EISENWARENFABRIK (1930 - 1950) WKC STAHL-METELLWARENFABRIKHANSKOLPING (1950 - 1970) . |
Here is Pg. 106 of Wagner's Cut and Thrust Weapons
Old 7th April 2012, 06:25 PM #225
Posted by: DaveA Member Join Date: Apr 2007 Location: California. Here is Pg. 106 of Wagner's Cut and Thrust Weapons Examples of blade-maker marks Pg. 109 of Wagner's Cut and Thrust Weapons . |
Markings - Johannes Wundes
Old 7th April 2012, 06:30 PM #226
Posted by: DaveA Member Join Date: Apr 2007 Location: California. P107, Wagner, Cut and Thrust Weapons "The markings on a blade made by Johannes Wundes (1560-1620).. King's head Imperial orb Passau wolf . |
pril 2012, 06:40 PM #227
Posted by: Ibrahiim al Balooshi Member Join Date: Jul 2006 Location: Buraimi Oman, on the border with the UAE Originally Posted by Jim McDougall Thank you Ibrahiim for your kind words toward this thread which truly has had great input over the years, though could certainly use a great deal more! I'm glad it gets the traffic it does regardless, and always hope the contributions which have been placed here have been found useful by other researchers. Regarding the Shotley Bridge Sword Co., this is quite a complex topic, and actually begins early in the 17th century with German sword cutlers who had come to Hounslow Heath mostly from Solingen. Some cutlers from Birmingham are known to have joined them there, but by about 1660s most of the Solingen makers had returned to Solingen. It seems only a few examples are known marked with Hounslow lettered in the inscriptions, and there are a number of examples of swords marked with the 'Passau wolf' but no other markings associated. The famed maker Peter Munsten as well as Johannes Kindt (later John Kennett) of course marked and inscribed blades accordingly. Munsten is better known for his cabalistic images on blades, but by 1660s returned to Solingen (according to Aylward, 1945). By around 1687 Hermann Mohll and some of the descendants of the Hounslow workers, along with newly immigrated Solingen makers formed a sword making center at Shotley Bridge in County Durham on the Derwent River. By 1690 blades from Shotley Bridge were being sold at a warehouse in London, but the enterprise was temporarily ceased when Hermann Mohll got in trouble with importing German blades ironically, and closing down sometime on or before 1703. Mohll reopened in 1716 (as Hermann Mohll & Son) and the business moved to Birmingham around 1832 from Shotley Bridge (the forerunner of Robert Mole, the famed maker who later was acquired by Wilkinson). There is some evidence or suggestion of crossed swords being used by the firm but I have seen no evidence of examples of blades with such mark. There are walloon hilt swords with blades marked in the fullers SHOTLEY BRIDGE from the time of the Monmouth Rebellion and Marlborough Campaigns but no specific symbolic markings I am aware of. This is an excellent question Ibrahiim, and I hope the data I have compiled is of some use explaining more of what these blades may have had on them. There is considerable material on these German swordsmiths in England in both Hounslow and Shotley Bridge, along with the somewhat irrelevant mystery of the Hollow Sword Co. which seems to have been more a real estate venture than sword enterprise. All best regards, Jim (Quote) Salaams Jim, I bumped into a peculiar reference in the Met Museum of Art archives about hollow swords and it appears that swords were actually made by "The Hollow Sword Blade Company" with a hollow blade filled with mercury so that the weight on thrusting was transferred down the blade to the tip therefor giving extra weight to the momentum... To source this reference simply tap into web search Swords From The Dresden Armoury from which I Quote "One learns, for example, of the Hollow Sword Blade Company which was chartered for the professed purpose of making hollow swords with running mercury inclosed to gravitate to the point when a blow was struck and so increase the weight and momentum of the stroke". Unquote. Regards, Ibrahiim al Balooshi. . |
Old 10th April 2012, 03:48 AM #228
Posted by: Jim McDougall EAA Research Consultant Join Date: Dec 2004 Location: Route 66 Dave, thank you so much for adding the excellent views of Wagner's references and the data on the Solingen makers, most pertinant in this thread. Ibrahiim, thank you for the reference to the intriguing "Hollow Sword Blade Co." which has become a most interesting conundrum in the study of the German swordsmiths in England during the late 17th, into the 18th c. This brings back great memories of research years ago into the lore of weapons, especially the tales of mercury filled blades. This idea was part of the fanciful notions of these times which dealt primarily with the 'steel apple', purportedly an iron weight which was fashioned to slide from heel to point of a blade on a rod along the blade. I recall research for an author who was trying to locate an example of such a sword for a novel set in 17th century Scotland. Apparantly the tales of this peculiar feature seem to have derived from the romantic tales of Sir Walter Scott who mentions this in one of his stories. The concept was carried further as I recall by the early biographer of James Bowie and his knife, mentioning the feature on a knife he had handled. No substantiation could be found for any of these weapons, but numerous mentions seem to have reflected influence between authors. The same concept seems to have been perceived by writers in the Victorian period who must have drawn from these notions, and an 1859 reference refers to 'quicksilver in the back of a sword' but no evidence of actual swords with this supposed feature to increase dynamic force of thier cut. They do mention the Walter Scott reference to the 'steel apple', which of course suggests the association in concept. In actuality, the term 'hollow' refers to the German trade secret of the machinery to roll out 'hollows' in thier 'Kolichmarde' type smallsword blades, giving them the distinct three or four fuller cross section. It had nothing to do with fanciful notions of mercury in hollowed channels in or on the blade. While the German sword producing firm of Hermann Mohll was in fact created to make swords, they were actually smuggling these 'hollow ground' blades into England and finishing them there, resulting in legal issues. To complicate things more, the 'Hollow Sword Blade Co.' appears to have been created around the same time purportedly to make 'hollow blades' but actually was more of a financial syndicate involved in purchasing forfeited Itish estates. According to Aylward and other writers, there is no evidence of blades from this venture, let alone any of the fanciful mercury filled blades, as far as I have ever discovered. Still, it is a great topic and we have had fascinating discussions on it and related topic over the years. Thank you so much for adding it here!!! All the very best, Jim . |
pril 2012, 03:32 PM #229
Posted by: Ibrahiim al Balooshi Member Join Date: Jul 2006 Location: Buraimi Oman, on the border with the UAE Originally Posted by Jim McDougall Dave, thank you so much for adding the excellent views of Wagner's references and the data on the Solingen makers, most pertinant in this thread. Ibrahiim, thank you for the reference to the intriguing "Hollow Sword Blade Co." which has become a most interesting conundrum in the study of the German swordsmiths in England during the late 17th, into the 18th c. This brings back great memories of research years ago into the lore of weapons, especially the tales of mercury filled blades. This idea was part of the fanciful notions of these times which dealt primarily with the 'steel apple', purportedly an iron weight which was fashioned to slide from heel to point of a blade on a rod along the blade. I recall research for an author who was trying to locate an example of such a sword for a novel set in 17th century Scotland. Apparantly the tales of this peculiar feature seem to have derived from the romantic tales of Sir Walter Scott who mentions this in one of his stories. The concept was carried further as I recall by the early biographer of James Bowie and his knife, mentioning the feature on a knife he had handled. No substantiation could be found for any of these weapons, but numerous mentions seem to have reflected influence between authors. The same concept seems to have been perceived by writers in the Victorian period who must have drawn from these notions, and an 1859 reference refers to 'quicksilver in the back of a sword' but no evidence of actual swords with this supposed feature to increase dynamic force of thier cut. They do mention the Walter Scott reference to the 'steel apple', which of course suggests the association in concept. In actuality, the term 'hollow' refers to the German trade secret of the machinery to roll out 'hollows' in thier 'Kolichmarde' type smallsword blades, giving them the distinct three or four fuller cross section. It had nothing to do with fanciful notions of mercury in hollowed channels in or on the blade. While the German sword producing firm of Hermann Mohll was in fact created to make swords, they were actually smuggling these 'hollow ground' blades into England and finishing them there, resulting in legal issues. To complicate things more, the 'Hollow Sword Blade Co.' appears to have been created around the same time purportedly to make 'hollow blades' but actually was more of a financial syndicate involved in purchasing forfeited Itish estates. According to Aylward and other writers, there is no evidence of blades from this venture, let alone any of the fanciful mercury filled blades, as far as I have ever discovered. Still, it is a great topic and we have had fascinating discussions on it and related topic over the years. Thank you so much for adding it here!!! All the very best, Jim (Quote) Salaams Jim, Thanks for that. I have dug up some interesting stuff on this subject and would like to park it here for reference please. Initially I thought that the blades part was some fanciful cover plan for the estates company but it seems they had a design to fill blades with mercury ... but when they tried it it apparently wasn't feasible... - The Hollow Sword Blades Company ~ was set up in England in 1691 to make sword blades. In 1703 the company purchased some of the Irish estates forfeited under the Williamite settlement in counties Mayo, Sligo, Galway, and Roscommon. They also bought the forfeited estates of the Earl of Clancarty in counties Cork and Kerry and of Sir Patrick Trant in counties Kerry, Limerick, Kildare, Dublin, King and Queen's counties (Offaly and Laois). Further lands in counties Limerick, Tipperary, Cork and other counties, formerly the estate of James II were also purchased, also part of the estate of Lord Cahir in county Tipperary. In June 1703 the company bought a large estate in county Cork, confiscated from a number of attainted persons and other lands in counties Waterford and Clare. However within about 10 years the company had sold most of its Irish estates. Francis Edwards, a London merchant, was one of the main purchasers. SEPTEMBER 28th On this day in history in 1720, the South Sea Bubble finally burst. The South Sea Bubble was an economic phenomenon which saw intense speculation in company shares and brought ruin to many private investors. In 1711, the earl of Oxford and others formed a company, known as The South Sea Company, to trade with Spanish colonies in South America. Britain was at war with Spain at the time but, it was hoped that soon the war would be over, and profitable trading could begin. The war ended in 1713, but the peace treaty was not favourable to British trade, only allowing one voyage a year to the colonies. The company made its first expedition in 1717 and made moderate profits, but the directors of the company had guaranteed a dividend of at least 6% per annum, and therefore the company was losing money. The directors tried to maintain confidence in the company by asking King George I to become its governor, and then formulated an ingenious scheme to boost public confidence in their enterprise. They proposed the takeover of the National Debt. Holders of government stock would be offered shares in the South Sea Company in exchange for their bonds, and the South Sea Company would become the sole government creditor and banker. This scheme was readily accepted by Parliament and public confidence in the company was restored. Investors believed that this company must be making vast profits in order to promote this scheme. In fact, the company was only exchanging its own paper shares for paper government bonds. The value of the company’s shares rocketed, and by the end of 1719, had reached a value of £1,000 for each £100 share. Many other companies sprang up in the wake of this seemingly lucrative enterprise. There was a company to ‘fix quicksilver and make it as soft and malleable as lead’. There was a company ‘to insure marriages against divorce’ and one ‘for the planting of mulberry trees and breeding silk-worms in Chelsea Park’. One company was formed ‘for carrying on an undertaking of great advantage but no one to know what it is’. The formation of companies to undertake fatuous schemes was not new at that time. The South Sea Company’s bankers were The Hollow Sword Blade Company, a corporation formed to produce hollow sword blades, but which had found that difficult or impossible, and had branched out into banking, issuing bank notes with designs of sword blades. In an attempt to reduce the competition for speculators’ money, the South Sea Company issued writs against many of these bogus companies. The courts ruled that many of these companies were indeed operating illegally, and added that the South Sea Company itself was not above suspicion. Shares in the company dropped at once. The directors attempted to allay disquiet by raising dividends but investors asked where the money was coming from, and stock prices fell further. The company tried to issue more stock to raise money to keep the business going but prices fell again. In September 1720, the directors called a shareholders’ meeting to try to restore confidence but prices fell further. On 24th September 1720, The Hollow Sword Blade Company, closed down, leaving the company with no funds and no business. On 28th September 1720, the directors announced that the company was to cease trading. A subsequent investigation revealed that the whole scheme had been operating illegally. The directors had misappropriated funds for their own purposes and had made vast profits on speculation. They had bribed the king’s mistresses to persuade him to accept the governorship of the company. Furthermore they had deliberately misled the public and the government as to the true value of the company. Parliament subsequently passed The Bubble Act which forbad the setting up of a company without a Royal Charter. As opposed to Hollow Grinding~ Blade cross-sections for typical grinds 1. Hollow grind-a knife blade which has been ground to create a characteristic concave, beveled cutting edge along. This is characteristic of straight razors, used for shaving, and yields a very sharp but weak edge which requires stropping for maintenance. Also used on ice skating blades. 2. Flat grind—The blade tapers all the way from the spine to the edge from both sides. A lot of metal is removed from the blade and is thus more difficult to grind, one factor that limits its commercial use. It sacrifices edge durability in favor of more sharpness. The Finnish puukko is an example of a flat ground knife. A true, flat ground knife having only a single bevel is somewhat of a rarity. 3. Sabre grind—Similar to a flat grind blade except that the bevel starts at about the middle of the blade, not the spine. Also named "Scandinavian Grind", it produces a more lasting edge at the expense of some cutting ability and is typical of kitchen knives. Also sometimes referred to as a "V Grind", made with strength in mind and found on tactical and military knives. 4. Chisel grind—As on a chisel, only one side is ground (often at an edge angle of about 20 – 30°); the other remains flat. As many Japanese culinary knives tend to be chisel ground they are often sharper than a typical double bevelled Western culinary knife. (A chisel grind has only a single edge angle. If a sabre grind blade has the same edge angle as a chisel grind, it still has two edges and thus has twice the included angle.) Knives which are chisel ground come in left and right-handed varieties, depending upon which side is ground. Japanese knives feature subtle variations on the chisel grind: firstly, the back side of the blade is often concave, to reduce drag and adhesion so the food separates more cleanly; this feature is known as urasuki.[2] Secondly, the kanisaki deba, used for cutting crab and other shellfish, has the grind on the opposite side (left side angled for right-handed use), so that the meat is not cut when chopping the shell.[3] 5. Double bevel or compound bevel—A back bevel, similar to a sabre or flat grind, is put on the blade behind the edge bevel (the bevel which is the foremost cutting surface). This back bevel keeps the section of blade behind the edge thinner which improves cutting ability. Being less acute at the edge than a single bevel, sharpness is sacrificed for resilience: such a grind is much less prone to chipping or rolling than a single bevel blade. In practice, double bevels are common in a variety of edge angles and back bevel angles, and Western kitchen knives generally have a double bevel, with an edge angle of 20–22° (included angle of 40–44°). 6. Convex grind—Rather than tapering with straight lines to the edge, the taper is curved, though in the opposite manner to a hollow grind. Such a shape keeps a lot of metal behind the edge making for a stronger edge while still allowing a good degree of sharpness. This grind can be used on axes and is sometimes called an axe grind. As the angle of the taper is constantly changing this type of grind requires some degree of skill to reproduce on a flat stone. Convex blades usually need to be made from thicker stock than other blades. This is also known as 'hamaguriba' in japanese kitchen knives, both single and double beveled. Hamaguriba means "clam shaped edge".[1] It is possible to combine grinds or produce other variations. For example, some blades may be flat ground for much of the blade but be convex ground towards the edge. Lastly a fragment from; STATISTICAL AND SOCIAL INQUIRY SOCIETY OF IRELAND VARIED ORIGINS OF THE IRISH PEOPLE. By T. U. SADLEIR. [Read on Friday, 21st April, 1933.] Quote" Quite a number of the Cromwellian grantees did not remain in Ireland, some returning to England in the disturbances of 1688 and others settling in Jamaica or Barbadoes. Many of their holdings, as well as a good many estates forfeited in the Williamite confiscations were bought up by a land jobbing company known as the Hollow Sword Blade Company. This corporation was originally engaged in the manufacture of sword blades, hollowed out to contain a quantity of mercury, which, falling to the inside of the point at every blow gave added force to the stroke". Unquote. Regards, Ibrahiim al Balooshi. . |
Old 11th April 2012, 04:54 AM #230
Posted by: Jim McDougall EAA Research Consultant Join Date: Dec 2004 Location: Route 66 Absolutely brilliant research Ibrahiim!!! Now thats what Im talkin' about! The mysterious (better described as devious) Hollow Sword Blade Co. was written about in some degree by J.D.Aylward in 1948 and in 1962. Apparantly the fanciful notion of these mercury filled blades (as described in an 1859 journal entry) was noted in analogy in a poem by Henry More in 1647 describing 'running quicksilver' in the back of a sword. It seems that from here the idea of increasing impetus in thrust or cut with either this unlikely channeled liquid metal or moving weight sliding on a rod entered popular culture via Sir Walter Scott, and subsequent authors. These concepts reappeared in the imaginations of 19th century writers, especially in America with the Bowie knife phenomenon and the novel "The Iron Mistress" which many people perceived as factual history of Bowie's knife. The 'Hollow Sword Blade Co.' name I believe has become loosely associated to the enterprises at Hounslow Heath in the early to latter mid 17th century and the German smiths who worked there. The shops there were largely closed by the late 1660s with most of the makers leaving. I think what is most puzzling is that during the English civil wars and later in conflicts in Ireland there are references to a 'Hollow Sword Co.' which made swords for all sides, and often received payment in lieu of currency with forfeited estates in Ireland. After 1700 they began realizing profits by selling off these estates. Yet other references claim that the Hollow Sword Blade Company was started around 1690, and another reference describes the firm being started by Hermann Mohll nearly Shotley Bridge (near Newcastle). Mohll ran afoul of the law in 1703 when he was caught bringing in illegally imported German blades. These were probably the 'hollow ground' blades favored for the smallswords becoming popular, which were already partially complete and finished there at Shotley Bridge. It would seem quite possible that the term may have been misperceived and perhaps interpolated with the notions of mercury filled channeled blades and sensationalized by contemporaries writing for effect. It seems further that the financial ventures undertaken under this unusual name must have derived from the holdings of these swordmaking enterprises in the form of these confiscated Irish estates, and assembled under the Hollow Sword Blade Co. name. Hermann Mohll, who was in the one instance noted as the founder, continued operating after his troubles in 1703 as Hermann Mohll & Son while the Hollow Sword Blade Co. continued as such until it dissolved in 1720. This suggests to me that the firm begun by Mohll (the ancestor of the well known Robert Mole firm of Birmingham, England eventually acquired by Wilkinson) was separate from the Hollow Blade Co. While of course not directly associated with the theme of this thread on markings, it is interesting history that has to do with the British blademaking ancestry and Solingen makers. Just as with our study of the fascinating history of makers marks, this is the lore of edged weapons which gives them such fantastic dimension. All the very best,] Jim . |
Unknow marks on cup hilted sword
Old 25th May 2012, 05:14 PM #231
Posted by: fernando Lead Moderator European Armoury Join Date: Dec 2004 Location: Portugal I am posting here a mark and a symbol engraved in a (Spanish ?) cup hilted sword, with hopes that some day i will have an ID. You may also check the respective discussion thread: http://www.vikingsword.com/vb/showthread.php?t=15597 Any help will be much welcome. . |
Old 27th May 2012, 02:10 AM #232
Posted by: Jim McDougall EAA Research Consultant Join Date: Dec 2004 Location: Route 66 Fernando, I cannot help my curiosity on these marks but I cannot make out what the forte mark is since it is partly obscured or worn away, in any case seems incomplete. The undulating line it seems was well explained by Jasper in the other thread showing the latteen wavy line on medieval blade, noting its Christian symbolism . I am wondering if it is possible that a mark like this on a rapier could perhaps allude to the fabled flamberge or wavy blades romanticized in some medieval swords and later rapiers as well. While there is some conflict in terminology with these blades termed flammard and flambard and the flamberge name for the sword of Renaud (It. Rinaldo), it does seem symbolically important for 'heroic' or powerful swords. I would admit this is perhaps a fanciful suggestion, but still it seemed worthy of note in addition to the well placed note by Jasper, with consideration to both. Naturally I would hope others might have seen this type mark on other blades, or might offer thier views. . |
Old 27th May 2012, 07:07 AM #233
Posted by: Ibrahiim al Balooshi Member Join Date: Jul 2006 Location: Buraimi Oman, on the border with the UAE Originally Posted by fernando I am posting here a mark and a symbol engraved in a (Spanish ?) cup hilted sword, with hopes that some day i will have an ID. (Quote) You may also check the respective discussion thread: http://www.vikingsword.com/vb/showthread.php?t=15597 Any help will be much welcome. (Quote) . Salaams fernando. I have read the supporting thread ( and about 10 hours of background research into Spanish swords though I have only scraped the surface so far ~it is a vast subject) As well as our own resource I note for forum a couple of back up introductory pieces which will help break the ice for newcomers to the style viz; http://www.yourphotocard.com/Ascani...rara_swords.pdf http://www.aceros-de-hispania.com/jineta-sword.htm gladius.revistas.csic.es/index.php/gladius/article/download/204/206 I include here a fascinating metalurgical research project done on Spanish blades viz; http://csic.academia.edu/MarcGener/...d_rapier_blades I note that your blade mark is not amongst the 90 plus marks in your earlier thread on Spanish blade marks .. could it be an old Arabic stamp ? Regards, Ibrahiim al Balooshi. . |
Old 27th May 2012, 07:05 PM #234
Posted by: Jim McDougall EAA Research Consultant Join Date: Dec 2004 Location: Route 66 Outstanding entries Ibrahiim! especially Marc's work on the metallurgy of many of these blades. The presence of Muslim swordsmiths in Spain is well established in medieval times and of course the jineta weapons as well. The diffusion between the processes and techniques between them and the Frankish smiths is also well known. While there may be a degree of connection developmentally it is not as far as I know clearly defined other than obvious influences being exchanged. The power of Solingens ever increasing production by the 17th and 18th century had superceded that of Toledo and blades were produced for the markets of Spain and Portugal as well as so many others. Although these blades were characteristically marked with inscriptions, names and marks to appeal to these markets, I am not sure of any Islamic mark or inscription of earlier Spanish makers of those earlier periods which might have carried forth into this later context. It is known however, that many earlier heroic and romanticized notions from European and perhaps even earlier Frankish period/Viking periods were often included on blades along with these otherwise 'tailored' markings. Having noted that, in further consideration of the 'wavy' blade idea to allude to fabled swords in chivalry, I completely forgot about Lee Jones important work on medieval blades "The Serpent in the Sword" . In this discussion on metallurgy of early medieval blades, he notes the cite from Paul DuChaillu (1889, "The Viking Age") where Skeggi instructs Kormak on the use of his sword Skofnung; "...if thou comest to the fighting place, sit alone and draw it. Hold up the blade and blow on it, then a small snake will creep from under the guard". These words metaphorically are meant to remind him to respect the sword and control his impulsiveness. Perhaps this perception seen inlaid on medieval blades such as shown by Jasper of the 13th c. example may have been carried forth in marks used along with others which survived as well, such as the crosses, cross and orb and others. Again admittedly speculative, but worthy of consideration. . |
Old 27th May 2012, 07:12 PM #235
Posted by: fernando Lead Moderator European Armoury Join Date: Dec 2004 Location: Portugal Thanks for your input Jim. You are right in that the mark in the forte is somehow incomplete. However rather than worn by use, it was in fact a job negleted by its author; actualy the (same) mark on the other side is in a much worse condition. The guy that apllied these marks wasn't minimally worried with their visibility. This is (also) why i think this not a maker's mark but the "punzon" of an inspector; while a displicent inspector or/and a much worn tool. But obviously this is my speculation; not the slightest evidence. The undulating line is not that rare. I have already seen it (at least) in sword loose blade i saw once for sale, which was actualy acquired by a guy i know. I just don't know if such one also had that V like simbol in its end. I have gone through my books looking for it, as i am sure i saw this symbol times before. Maybe on of these days ... . |
Old 27th May 2012, 08:57 PM #236
Posted by: fernando Lead Moderator European Armoury Join Date: Dec 2004 Location: Portugal Shalom Ibrahiim, No, i don't think this is an Arabic (or Mudejar) mark. ... Although in the Palomar Nomina, the one you cite with the 90 plus marks, some secret Moors are included; like Julian del Rey, wom i think Jim has an essay on ... but that is another story. No, even in that lousy punction condition, one can see it is not an Arabic symbol ... crown, plus what looks like a (Latin) initial and all that. . |
Old 28th May 2012, 06:16 PM #237
Posted by: Ibrahiim al Balooshi Member Join Date: Jul 2006 Location: Buraimi Oman, on the border with the UAE Originally Posted by fernando Shalom Ibrahiim, No, i don't think this is an Arabic (or Mudejar) mark. ... Although in the Palomar Nomina, the one you cite with the 90 plus marks, some secret Moors are included; like Julian del Rey, wom i think Jim has an essay on ... but that is another story. No, even in that lousy punction condition, one can see it is not an Arabic symbol ... crown, plus what looks like a (Latin) initial and all that. (Quote) Salaams fernando ~ Yes I had my doubts when I saw the & in the final circle of the stamp which is as you point out Latin(Et = & = and) and would agree that it is either a Spanish or German stamp. (Solingen did a lot of copying and vica versa.) Regarding the snake insignia etched on swords there is an interesting link on Omani Sayf; markings for ID by Ilyiad on the Ethnographic forum which is interesting. In addition it carries the running wolf copied stamp. In fact on the subject of the running woolf there are two forms; 1. The Passau of Germany(Solingen) and 2. The Perrillo of Spain (Toledo) Whilst the former tends to be a running woolf the latter appears as a prancing or rearing dog. Good sword stamps appear copied onto Arabian swords but it is a puzzle since no one has defined from which area the stamp was copied.. Was it the German or Spanish stamp copied by middle eastern swordsmiths..? On the & mark I had originally thought it may have been part of the strap attached to a horn as in the Weyersberg mark from the 1630 era. This does not explain the rest of the strike mark which I cannot decipher...could it be two strike marks? Regards, Ibrahiim al Balooshi. . |
Old 29th May 2012, 04:54 PM #238
Posted by: Jim McDougall EAA Research Consultant Join Date: Dec 2004 Location: Route 66 Excellent observations as always Ibrahiim! Thank you for the reference to the 'rocker' type punches on the Omani blade which indeed seem to correspond to the snake/serpent type mark being discussed. This does seem to have a rather mechanical stylized similarity to the 13th century latteen inlaid mark presented by Cornelistromp on another thread, and was used by medieval swordsmiths on thier blades presumably in German shops. It is always of course compelling evidence that these early blades were seen in Arab/North African/East African trade contexts and the use of the images carried forth in local work. While the perillo (=little dog) image attributed to Julian del Rey in Spain does seem to have had similar impact on some native markings in North African context (Briggs, 1965), it does not seem to have been duplicated in the rest of Europe to the best of my knowledge. The 'running wolf of Passau' of course was somewhat widely duplicated in vast variation in Europe as well as the Caucusus, North Africa and probably Arabia in some degree which remains unclear. It seems the ampersand (&) symbol did also appear in some markings and print but as far as I know this device was not widely used until more recent times on blades. It would be interesting to look further into that aspect. All the best, Jim . |
Question THE WOLF AND THE DOG
1 Attachment(s)
Old 29th May 2012, 06:31 PM #239
Posted by: fernando Lead Moderator European Armoury Join Date: Dec 2004 Location: Portugal My perspective of the mark on the forte not looking Arabic script was not the suggested & but the geometric incomplete figure rright below, by (me) being originaly influenced by the letter T of Toledo. The symbol above, which i can understand that Ibrahiim sees it like a &, would have been for me some kind of crown ... again influenced by traditional mark fashions. However for as much as it looks like the ampersand, i could never imagine such figure stamped in XVII century swords. But of course this could also be a German (Solingen) blade, mounted with a Spanish (not to say Portuguese) hilt. I am convinced that the localizing of the "snake symbol" of the blade would help to decipher the riddle. The symbol on Ilyad's saif would be a distinct thing. Its zig-zag lines are angulated, not waving, which makes it a different attitude. As quoted by Jim, while the Passau wolf has been copied all over, the perrillo of Julian del Rey did not reach so large universe. Furthermore, each of them has a rather different basis; while the Passau wolf, despite its several variations, appears to be an unequivocal zoomorphical specimen, the perrillo gives place to determined speculation. Germán Dueñas Beraiz, in his work on Julian del Rey, while suggesting that: A- the guy was a morillo (Moor), a Jineta sword smith who worked for Boabdil, was converted to christianism by the Catholic Kings after the take over of Granada, thus receiving the last name of del Rey (of the King, or King's), B -presents some doubts on the zoomorphic figure being a dog or a lion. The figure of a lion was (and still is) an heraldic symbol present in several Spanish cities and could have well been the quality inspection mark of Zaragoza, where Julian del Rey worked, as reminded in Palomar's nomina. It is also suggested that Palomar might have adopted a position for the animal, in his drawing, not exactly as it should appear. On the other hand Edouard de Beaumont connects the perrilo in the blade of a jineta present in the National Paris Library to Julian del Rey while in his Granadine personality, giving logic to the later appearance of the dog in Julian's swords. To complicate (even more) the things, i here attach one more (of other) mark/s used by Julian del Rey, this one present in sword kept at the Musée de l'Armée in Paris. . |
All times are GMT +1. The time now is 06:22 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Posts are regarded as being copyrighted by their authors and the act of posting material is deemed to be a granting of an irrevocable nonexclusive license for display here.