![]() |
Placement of Omani Royal Khanjar
Salaams, Ibrahiim,
You advised, "I think it looks great exactly where it is." I couldn't agree more! Although I'd still like to see it up high on my wall, I think the potential hazards outweigh the aesthetics. Also, on that Baatista design, why are there only four rings, not seven? Is it only the Royal Omani Khanjar that gets 7 rings? Thanks again, and sorry for the quality of my last photos. It was night, and I was in a hurry to snap the photos and send 'em on before I fell asleep at the wheel, so to speak. Sincere best wishes, JRF P.S. I still think the Royal Omani Khanjar is the most beautiful dress dagger in all Arabia. Of course, I may be somewhat biased. :rolleyes: |
Quote:
Salaams NovelsRus, Baatina(Coastal Oman) technically from Muscat north and north west up the coast as far as Mussandam; here and in other Omani regions they sport the 4 ringer Khanjar. In Muscat there is a 7 ringer with an ordinary Tee shaped hilt and in addition to this there is the Royal Khanjar 7 ringer with the fancy hilt. Occasionally Muscat Khanjars appear with 8 rings(just to confuse the issue) and all I can say about rings is that without them the whole structure would fall apart... They are very much what holds the whole ensemble together forming the belt section. I agree that the Royal Khanjar is a superb looking weapon. Thanks for the post... :) Regards, Ibrahiim al Balooshi. |
3 Attachment(s)
Salaams All; Note to Forum.
For something a little different I include here a Khanjar of UAE style (a photo of a photo)and said to have been sold 23 years ago on the passing of the owner. Now one of the sons wishes to have a Khanjar of equal style and quality copied from the original seen here. It is said to have been constructed in Dubai in the old souk (now gone). The peculiar part is that the cuff of the dagger and throat of the scabbard and the crown are matching "neilo style" something rarely seen in Khanjars. The hilt is Rhino with silver pins, gold buttons, central gold ferule and there is extensive goldwork in the scabbard. I have no shot of the blade(I only had one photo to work with) but suspect a fine quality item. All I have to do now is build one identical to this! :shrug: Regards, Ibrahiim al Balooshi. |
7 Attachment(s)
Here are some photos of an Omani Khanjar that just arrived. It's a classic and goes with my Omani swords.
|
Quote:
Salaams Michael Blalock ~ Interesting Khanjar. Looks like Rhino in the hilt. This looks like the Royal Khanjar style though perhaps restyled below the belt which makes it a 4 ringer.. My guess is this carries a re-styled scabbard but from which region? Salalah? Regards, Ibrahiim al Balooshi. |
2 Attachment(s)
Yes, Ibrahiim, the hilt is identical to this one.
http://www.swordsantiqueweapons.com/s853_full.html You could replace all the missing parts on either hilt if you had the other, but the scabbards are quite different. |
Quote:
Salaams Michael Blalock~ It is confirmed that #44 is a Salalah Khanjar but the hilt being Royal by design. The criss cross wire of the scabbard being an indicator though not all Salalah scabbards are like this; some are. On the two hilts at # 46, I would even say these were made by the same silversmith such are the precise similarities :shrug: Regards, Ibrahiim al Balooshi. |
The Khanjar. The Rhino. The Link.
Salaams All ~ Note to Forum;
The Khanjar. It occurred to me that using silver pins hammered into Omani Khanjar Hilts is done for several reasons; 1. To add weight and balance to the hilt. 2. To add value since the weight of several hundred silver pins is considerable. 3. To decorate the hilt... specifically Rhino since other materials would split where as Rhino accepts the myriad of pins without breaking. 4. Prestige; since it can be seen from a distance and at a glance that here is a Khanjar with Rhino Hilt thus the wearer is a person of some standing. 5. To emulate the spaghetti ended look of Rhino Horn in the pommel top. It may be an important discovery notwithstanding the fact that a lot of Royal Khanjars have Rhino Hilts (their hilt design is very different) the use of pins in other Omani Khanjars seems to be hand in hand with Rhino Horn useage. It occurred to me that this one animal had an astonishing influence upon Omani Khanjars up to and beyond the inclusion in design in the mid 19th Century of the Royal Khanjar which though only a tiny fraction of the hilt is showing almost all were constructed of Rhino Horn. Non Royal variants must, if they are to have serious worth, be Rhino Hilted. The Rhino. I have discovered that 11 hilts could be made from the large horn whilst 3 were possible from the small horn.. Richardson and Dorr "The Craft Herritage of Oman" refers. The Rhino thus is involved in some powerful influence on this weapon...The African trade factor, Prestige, Power(the power possessed by a Rhino), Design of the Hilt and the practical acceptance of hammered pins, The most expensive of horns...worth more per gram than gold. In what other ways has this animal influenced Omani Khanjar design...? The Link. Could the Rhino Horn, in fact, be the essentail design in the curve of the Khanjar Scabbard ? ...We may have hit the nail on the head... :D Regards, Ibrahiim al Balooshi. Notes; For a remarkable visual of "Hilt Silver Pins" comparing the design to Rhino Horn natural form; view http://www.vikingsword.com/vb/showthread.php?t=15905 at picture 5 on #1. |
Quote:
1, I agree. 2, I agree. 3,I agree. 4,I agree 5, Not sure realy. Eye of the beholder i guess... 6. Last but perhaps not of least importance,to provide a sturdy grip to wet,sweaty or even bloody hands.... Usefull in the times it was still a weapon Im sure. ;) spiral |
Quote:
Lest we forget the blade was designed "it is said" as a skinning weapon and certainly slippery hands covered in blood would be normal... I would go further into the realms of the Rhino story by indicating that Rhino skin was favoured for the Omani Terrs .. The Buckler battle shield further indicating the influence of this great animal in the history of Omani weaponry. I urge you to reconsider point 5 above... the pins are a masterful takeoff of the pattern of the spaghetti ends ~ and the entire arguement, discussion, and debate is pinned to that ('scuse pun). From this detail I attach the full on disclosure of the shape of the Omani Scabbard being directly linked to the Rhino Horn design / shape. There is virtually no other practical reason that holds water ~ the key indicators being ~ 1. Sea Trade influence with Africa.(availability of Rhino Horn) 2. The prowess of the Rhino ( Power ! Prestige ! Price ! ) 3. Practicality( non slip, easy to decorate, translucency with age etc) 4. The fact that the best Terrs shields were taken from Rhino Hide. 5. Looks like a Rhino horn shape. 6. The best hilt is Rhino so why not the scabbard design? I therefor submit to Forum that the shape of the Omani Khanjar Scabbard is directly related to the Rhino Horn. :shrug: Cautionary note: There is some discussion in my team at this time over the origin of material for the Terrs which on one hand appears to be from a land animal waterbuffalo or Rhino? and on the other from a sea animal they call sea dog... probably walruss ... It may be that it is from both. These days I have encountered wooden and reed variants and modern poly/resin products. Regards, Ibrahiim al Balooshi. |
Many good points, glad we both see as the truth Ibrahiim. ;)
Glad to see also youve also added non slip grip to your observations, & shape of blade to!.... It seemed that way to me, hence my comments on this & the other thread, pointing this out earlier. ;) Personaly I think scabbard design looks nothing like a rhino horn & is just a practical evolution to hook underneath a belt or sash, to aid grip as the dagger is pulled.. After all Rhino horns are not nearly U shaped after all. :eek: I think Terrs are made of, Rhino,Elephant, hippo, buffalo, whale & indeed any other thick heavy hide probably? They all work when thick enough... Re.your point 5, I would agree with you if the nails were just on the pommel, as they usualy cover the entire front of the hilt. i think it more for the grip & decoration that there used? Must say though that when it cones to blade design, no one on this earth usually uses a double sided dagger as a skinning knife, thats rather impracticle, when you add the central rib as well, which obviosley is for for stabbing penetration, it shows Jambiays prime function is not as a skinning knife. To me personaly it seems from its blade design to be a weapon for shallow slashing & deep stabbing wounds. Obviosly Originaly designed as weapon. :rolleyes: But of course thats just my thoughts, for what there worth.... Spiral |
The Curve on The Rhinos Horn..
:shrug:
Quote:
Salaams Spiral.. Yes I stole that point straight from your post about the grip... :) What is known about Terrs material is mixed with some comments from European 19th Century passers by stating this or that material... Rhino waterbuffalo whale etc... What I have seen and what is visible in The Craft Herritage masterwork by Richardson and Dorr i.e. several material types including thick hide, wood and reed/ woven palm material...and these days rubber/ poly material...All that needs to be focussed with what I have only recently discovered after talking to some old fishermen..that there is a fish which barks ... called a dog of the sea (kelb mal bahr) or something like with huge teeth and flippers !!... that I assume is a Walruss ..and that the skin behind the neck at the shoulders is the favoured hide for Terrs. I have a couple of these Bucklers but I have no idea what the test is for Walrus hide! Nails... The silver pins...ah good point except that this hilt may well have been transferred from a Muscat dagger..or from a Jazzan Hababi dagger; Now in Saudia Arabia all at # 17 on this thread. (Pictures 1 and 3) or even from a Salalah dagger #1 picture 4~ the black hilt to the right of frame. There is a slim chance that it could have originated from a Royal Khanjar since it is quite narrow at the top... It would certainly make sense to recycle the Rhino horn ~ Skinning blade. I agree that this blade is a defensive strike weapon... though it is said that the shape of the wide blade is also good for cutting and scraping the skin off the meat...whilst skinning. I've seen a camel and a few sheep and goats dropped with one cut but I agree it seems a bit cumbersome to use it for skinning though that is the tale. Lost in time this part I'm afraid... and until I can analize the Museums records its worth logging for later. Ah!! The shape of the scabbard.. Funnily enough the horn design part that I speak about is not curved... It is a straight formation...with slight elongation on the top side. The curve takes place at the lower base of the Scabbard. see photo at # 1. :shrug: Regards, Ibrahiim al Balooshi. |
This thread continues to develop as an outstanding resource in learning about these fascinating daggers, and it is great to see the itemized attention to important elements concerning them.
It seems that rhino horn is as discussed, a powerful and symbolically oriented material not only in the hilts of these daggers in Oman, but throughout other Arabian regions. Some years ago there were some discussions about the various types of rhino horn used in these hilts, and that certain types actually were called by specific terms, and there were actually graduated scales of status in them. I cannot recall the details offhand, but beyond I believe the talismanic properties which are part of the mystique in these rhino hilts, the status in accord with the rarity of the horn type also becomes a factor. It seems mostly these situations pertained to Yemeni regions, and at the time not sure if Oman was included in the discussions. I do recall also that as rhino horn became somewhat more controlled in trade in the latter 19th early 20th c. many of the blades into Arabia from Ethiopia entered through the Aden entrepot which was British occupied. Many of these were British and German blades bearing the Abyssinian 'Lion of Judah' and sometimes Amharic script, and as I understand the rhino shotel hilts were removed for use on khanjhar hilts. The blades ended up hilted with some of the silvered repousse style hilts mounted with these blades, many returning in those configurations back to North Africa. I am wondering if similar values as described with the Yemeni khanjhar situation are observed pertaining to grade and type of rhino horn, translucence, color etc. All best regards, Jim |
Quote:
Salaams Jim ~ Thank you for that important contribution. I understand that Oman was trading with (and owned large areas of) coastal Africa as well as the Zanzibar hub itself..though that declined considerably from the late 19th to the mid 20th C. I wonder what trade to Oman went through Aden under the British. The other port would have been Jazzan now in Saudia but just around the corner in the Red Sea. The dagger(scabbard) of that region (called after one of its cities Hababi) is an almost carbon copy of the Royal Omani Khanjar. Oman seems to have favoured clear translucent hilts whilst Yemeni daggers didnt seem to mind if they were black and oily. I have never heard of a grading system... but will enquire. Regards, Ibrahiim al Balooshi. |
This was from the Yemeni times long ago...
Qualities of Jambia in Yemen The most famous sort of the Jambia is that which has a “saifani” handle. It has a dim yellowish luster. When it is clearer, it turns into a yellow color. This is called saifani heart. Some of the saifani handles are called “Asadi”, when they turn into greenish yellow. When the handle becomes Whitish yellow, it is called Zaraf. There is also Albasali (onionish) kind whose color looks like white onion. Lots of other on the spot information in the Pachyderm magazines & articles, including many interveiws with jambiya makers,sellers & the dealers & smuglers of rhino horn. linky |
Quote:
Salaams spiral ~ Brilliant link addition for research and library purposes thank you very much ! In Oman I am only familiar with the term Z'raf(Zaraf) which appears to be the general term for Rhino here...though the other terms may simply have fallen from use... I will check that. Thanks again for the excellent link. Regards, Ibrahiim al Balooshi. |
Whats in a word...?
Salaams All; Note to Forum.
A number of pointers in the construction of The Omani Khanjar lead me to think that the link with the Rhino is far stronger than at first perceived. viz; 1. The importance of the Rhino Horn hilt.. Power and Prestige. 2. The use of pins mirroring Rhino natural fibrous design in the hilt. 3. The curved shape of the scabbard shaped like a Rhino Horn. 4. The curved blade shaped like the Rhino Horn. 5. The dagger worn at the front. ( see note below) Intriguing also is the name itself~ KHANJAR; an arabic word... and the closely sounding Yemeni word for their dagger; Jambia (Janbia) meaning beside.. though there is some irony in that the Yemeni weapon is worn frontally. (not on the side, though, the Thuma another similar Yemeni dagger is carried at the side) The name for Rhino is "Wahid al Gharn"... The one with the horn. Leaving the Yemeni question to one side ( no pun intended ) could the root Gharn be linked to the root Khanj? I can imagine that down the ages this word for horn modified from Gharn to Khanj and thus Khanjar transpired... So the hypothesis thickens ~ From ancient times was the Omani Khanjar really a dagger and scabbard named and worn as a honorific representation of the Rhino? Does it in fact represent the power, strength and prestige from that great beast. Are all of the main parts attributable to this single animal? Caution; Whilst it "looks" like it... and though I show a series of pointers which "appear" to back up my theory ~ There is hardly a scrap of evidence to support my view. :D :shrug: Note. As a further extension to the general theory perhaps the Khanjar is worn frontally for the same reason? i.e. Thats where the Rhino has its main armament ! Regards, Ibrahiim al Balooshi. |
Charles Buttin.
Salaams All ~ Note to Forum.
Arguably one of the best and most respected ethnographic weapons experts of all time...Charles Buttin whose essential biography can be seen at http://old.blades.free.fr/books/cbuttin.htm It shows a wonderful photo of the man himself in his study surrounded by his collection. The site makes it possible to purchase a book from one of the great mans decendants. It contains an extensive index. Buttins masterworks on Ethnographic arms is "THE REFERENCE" to quote when discussing ethnographic arms. (or one of them !) :shrug: Regards, Ibrahiim al Balooshi. |
Cowhorn commonly used for Omani Khanjars.
3 Attachment(s)
Salaams ~ Note to Forum.
The most exotic hilts are of course Rhino or Elephant tusk however several other materials are used including cowhorn (Bakar). Below is a typical hilt showing silver pins (very small silver nails) hammered into the bone close to each other but not too close or the bone will split... something that doesn't happen to Rhino. Sometimes sandal wood hilts can be found... which are the most expensive of the wooden hilts. Regards, Ibrahiim al Balooshi. |
3 Attachment(s)
Salaams All~ Note for Forum; I thought it was time to look at Khanjar Belts. In Oman belts are either woven geometric patterns on cloth or leather with the pattern stitched with silver thread. see..http://www.vikingsword.com/vb/showth...OMANI+KHANJARS at #16 to view a belt in the making.
There are several variants...some 3 cms some up to 6 cms wide. Essentially and for comfortable wearing~ the bigger the man the broader the belt. The first is a fat belt; fully six cms wide. The rectangular pattern common in Oman though the heart shaped design is less common. On with the pictures ! :shrug: Regards, Ibrahiim al Balooshi. |
6 Attachment(s)
Salaams all ..Another Khanjar example from the Omani Coastal Belt (The Baatina) with an unusual clasp setup securing belt to Khanjar illustrating tree of life designs. Quality translucent bull or cow horn hilt with silver pins. :shrug:
Regards, Ibrahiim al Balooshi. |
2 Attachment(s)
Quote:
Here is another style of tobacco container; this time all silver. The second picture is the Mukhallah or Kohl (antimony paste) container and eye applicator..worn on a chain on the Khanjar or Gun belt. This one taken from the design of the 303 blackpowder Enfield bullet and case. Oddly all screw mechanisms on traditional silver worked lids are counterscrew (opposite direction to those in the west.) Regards, Ibrahiim al Balooshi. |
6 Attachment(s)
Salaams ~ Note to Forum. Adding to the flotilla of Omani Khanjars ~
Regards, Ibrahiim al Balooshi. Notes; 1. Number 1 was described with a woft of the hand as from the Sharqiyyah Eastern Oman probably Sennau. An unusual chequered style. 2. Number 2 is a Jebali dagger from Salalah.( a slightly mismatched dagger and scabbard.) 3. Number 3 is a 4 ringer of Baatina style with bedouin eyes below the belt section but with the Saidiyya (Al Busaidi dynasty hilt ~ the one designed by the wife of Said Sultan around 1840ish ~ Sheherezad). 4. Number 4 is a new Saidiyyah 7 ringer with gold adornment and a working dagger behind.. 5. Number 5 and 6 is completely unusual. This dagger is actually from Kassab in the Mussandam. I met the chap who made it. He copied it from one given him by his grandfather. It has the look of a Muscat Khanjar of Tee shaped hilt with what appears to be 7 rings plus a ring. It has an odd semi precious stone added. This is a very rare animal. |
Quote:
IMHO it shows none of the usual traits of Omani origins. |
Quote:
Salaams kahnjar1 ~Take a walk through the souk in Salalah and see how many Jebalis are wearing these. Its only 100 kilometres from Salalah to the Yemen border and "straddling it" are several Jebali tribes. This dagger style flows both ways. The silver work is Salalah. I spent 6 years there ... 4 of which were in the mountains and on the border. I saw lots of Jebalis wearing these ~every day. Believe me this one is a Salalah (regional ) Jebali dagger. Knowing the region I asked the shop owner where this one was from to confirm it was Dhofari not Yemeni...He said Salalah. He's "al Balooshi" as well ... and has the Mutrah shop. Separating the two forms is probably impossible without having each of the owners standing in front of you as they are virtually identical people and it would be very difficult to separate the two marks. The two forms are, thus, probably one..and though I don't have the local name to hand it wouldn't surprise me if it was similar. Origin of ethnographic species is often linked to items and it is easy to see how the run down degraded old Yemeni water works called The Mehrib Dam that finally collapsed in about the 6th Century AD brought with it through the 3rd to 6th Centuries a massive exodus from Yemen to Oman. With that must have traversed many artifact styles and probably craftsmen. Regards, Ibrahiim al Balooshi. |
1 Attachment(s)
Quote:
Salaams again on the same subject ~ Page 417 in The Craft Heritage of Oman by Neil Richardson and Marcia Dorr (An Omani Heritage Documentation Project) refers with a picture and a small description with its name Quote "The style of the Dhofara dagger (Khanjar qabiliyyah) has similarities to both the Yemeni janbiyyah and the khanjar of northern Oman".Unquote. For research purposes I add the picture below. Regards, Ibrahiim al Balooshi. |
Salaams all~ Note to forum.
The decline in ethnic artefacts stretches up and down the entire spectrum of antiques collecting. Regarding Arabian Daggers, Swords and to a large extent old and antique arabian items it is, however, a different situation to that which exists in the west and one which the ethnographic community ought to be aware; Arab men wear Khanjars and Jambia with pride. The item may be regarded as a badge of office and head of the family. There may well be the occasional person who owns an old dagger but generally the demand is still high for new ones. At the same time daggers do deteriorate and fall apart or because of neglect fall into complete almost abandoned ruin. They are however cleverly constructed so for example should a new blade be required (or hilt, scabbard, belt, rings etc etc ) it is an easy enough job to fit replacements. Silver because it is oxidising constantly produces a fast acting patina and a brand new silver item can look much older after 5 to 10 years of normal use. What is apparent is the difficulty for some to realise the nature of antiquity in Arabia. Oman for example was in the dark ages for many centuries and really didn't get going properly in the modern world sense until 1970. Until the advent of oil in other Arab countries the same situation applied, consequently, what people in the west consider as old, ancient, tribal and ethnograhic are still in vogue here. The idea that something is old fashioned and must be disguarded for the modern equivalent took much longer to happen here... and in some remote areas it hasn't happened at all ! Something else, however, happened with traditional weapons.. They were iconised. In Oman, for example, the Khanjar and the Sword are virtually symbols of the country... THEY ARE ITS LOGO. As the late Antony North pointed out in his brilliant book on Islamic Arms and Armour once a system had survived as tried and tested..or trusted ...they didn't change. Thus we have ethnographic weapons, now iconised, that were used for centuries and retained whilst other countries disguarded, modernised and researched new and inovative ideas. In Oman if it worked they didnt change it... Simple? Thus in Oman there are silversmiths using the same designs and in many cases the same tools with the exception perhaps of a blow lamp and light from an electric bulb ! working in the same way they did centuries ago. High on their list of products are Omani Jewellery and of course Omani Khanjars etc The other failure I have observed is on the subject of new and or restored items ; Arab men want new Khanjars. The demand is high. A few purchase older items but in their collection of 3 or 4 Khanjars they usually have a new one ... because it is the done thing to arrive at a wedding feast or important meeting wearing the Khanjar, thus, a new weapon shows prestige and wealth etc to all the guests. That is the tradition. Because the Khanjar is "meccano built'' i.e. from a load of separate replaceable parts it also lends itself to being upgraded easily. A better blade or a horn or Rhino hilt can be fitted..There is technically no end to the upgrade since all the parts are changeable. Many Khanjars get the upgrade treatment at some point. This is normal in Oman. The fact is that Omani Khanjars and Swords are part of Omani History but they are vitally part of its present and future as well. These are living, breathing artefacts protected by the rich heritage of Oman so they should endure through time. Regards, Ibrahiim al Balooshi. |
Quote:
Brother Ibrahiim, you are mistaken. The 2nd pic is not a Kohl and eye applicator. It is a Dokha (Persian Tobacco) container and Omani pipe (Midhwak). I know this for a fact, from the dhow-bowsprit shape of the pipe. I used to smoke this stuff. Its very common here in the UAE, especially among the teenager groups. |
Quote:
Salaams TribalBlades IT FLIPPED!! Sorry Chief, the pictures raffled themselves into position so I ought to have made clear the gun cartridge from which the Kohl (antimony paste derivative) which can be either the 303 "Canad"style (SMLE Lee Enfield Birmingham .303 ) or the .303 earlier circa 1890 blackpowder round...OR the earlier shape from the Martini Henry 577 cartridge. The sharing of Kohl applicators was the major cause of conjunctivitis for many decades..before 1970. The other item is the tobacco pipe and tobacco holder. Well spotted !!! :) Regards, Ibrahiim al Balooshi. |
Quote:
wow! i just noticed the Kohl-container is made of a cartridge! hmm . . It seems bullets cartridges have widely been put into other uses. Just the other day, I saw an old Arab Bedu man holding a walking stick, the tip of which was made of a Martini-bullet cartridge! and thanx for the info about the conjunctivitis. That is definitely something new! :eek: |
Quote:
Salaams TribalBlades ~ They are designed in the similar style but not made from the old cartridges (in fact it is a hollow silver casting of the entire bullet and cartridge with a counter rotating silver hand made screw) The material is high grade silver. The chain and applicator are also silver... Regards, Ibrahiim al Balooshi. |
2 Attachment(s)
Omani Khanjar, This old dagger looks to me to be nicely refurbished. The blade is old and smells of old herbs and has a thwack sound when flicked with a fingernail...The rings are well worn. I would change the belt in the age old way of upgrading the weapon and add a work knife to it . The hilt is cowhorn quite nicely pinned. Original goldwash strips adorn the piece.
Regards, Ibrahiim al Balooshi. |
1 Attachment(s)
Salaams All, They dont make them like this anymore ~ This is the original form chain style on the silver bullet and cartridge kohl container for men. Worn on the gunbelt of slung over the Khanjar this was used to give far sight to the wearer... An olden day concept to cut the suns glare like American Football Players wear today sort of idea. :shrug:
Regards, Ibrahiim al Balooshi. |
6 Attachment(s)
Salaams All ~ Just building up the Data Base ! Some Emirati Styles here. The differences being overall style difference including chevron shaped rings or thinner rings and a lot of leather showing in the lower scabbard region beneath the ring belt. :shrug:
Regards, Ibrahiim al Balooshi. |
Quote:
CORRECTION The place Hababi is in Yemen South West Of Ta'izz and about half way to the Red Sea coast ~ In Yemen. The dagger though it is termed "The Hababi" by Omanis may be termed something else in Yemen and the border area with Saudia Arabia(The Assir) discussed above. The place which gave the weapon its name is Hababi in the Yemen some distance to the South of the border ... but in Yemen. The following statement remains more or less intact; What I intend to show is how this migration brought with it the Omani Khanjar that we see today but for a comparison we need to look at the Asir regional dagger. ( The Asir has been part of Yemen up to about 1923 but is now part of Saudia Arabia. The capital is Abha and the main seaport of the region is Jazan.) For further references to the Asir dagger see the following~ http://www.flickr.com/photos/charlesfred/5512947198 http://www.flickr.com/photos/mytripsmypics/4336633417 http://www.flickr.com/photos/charlesfred/5780340287 http://www.flickr.com/photos/charlesfred/5780340299 http://www.flickr.com/photos/mytripsmypics/4318547823 Regards, Ibrahiim al Balooshi. |
3 Attachment(s)
Salaams ~Back to the subject ~More Khanjars. Note the small money pouch on the right with the geometric figure 5 at its base. It should be remembered that in itself silver is Talismanic being representative of the Moon (Gold The Sun Silver The Moon) but that other Talismanic shapes are also reflected in the designs ;The figure 5 being particularly important. :shrug:
The book has this one down as Omani but to me it is Emirati. Regards, Ibrahiim al Balooshi. |
7 Attachment(s)
Salaams all; It is not uncommon for Omani Khanjar parts to be interchanged. This is quite often done at random and over a number of years. I am not aware of any Khanjars that adopt foreign countries weapon parts even if in some cases the weapons are quite similar for example those of the Asir region and their daggers which are worn on both sides of the Saudia / Yemeni border. It simply isn't done. The closest Omani weapons to those of Yemen are to be found in the Dhofar region whose capital is Salalah. Often Omani Khanjars taken there have changed quite dramatically from their original configuration but careful detective work can unpick the mystery. Here is a Khanjar which I am including in this thread because it is in fact Omani. With it are other Omani dagger types from which parts were probably taken.
The first picture courtesy Forums http://www.vikingsword.com/vb/showthread.php?t=16834 by Khanjar 1 shows a remarkable Omani Khanjar chopped and changed down the decades and very much the style of Salalah Jebali weapon..This is a classic in its own right. After that in no particular order are likely style candidates from which parts may have been obtained or chosen perhaps in the silversmiths shop or from pieces in the owners domain..and a bit of a punt for the prehistoric beast that provided the horn. Regards, Ibrahiim al Balooshi. |
Correction.
Correction.
Salaams all ~ The above post is corrected as follows and in the time honoured tradition of "If Im wrong I will be the first to admit it" and after careful deliberation the project dagger shown above in the first picture is in fact as I first said... Habaabi from The Asir region of Saudia and worn on both sides of the border Saudia/Yemen. The peculiar terminology Habaabi appears to originate in the name of a city some distance away called Hababi in the Yemen South West of Ta'iff and between there and the Red Sea Coast. :shrug: Regards, Ibrahiim al Balooshi. |
Penny drops on Royal Omani Khanjars..
3 Attachment(s)
Salaams all Note to Library~
For Reference:The basis of the discussion is at #17. The Royal Omani Khanjar. We know that Sheherazad the Persian Princess who was one of the wives of Sayyid Said Bin Sultan who ruled Oman 1800 to 1856 designed the Royal Khanjar, The Royal Turban and more than likely the Royal Hilt of the Iconised Omani Battle Sword. The likely timeline to be confirmed is about 1850. I show a couple of Royal Hilts below. What was not realised was that it was ONLY the hilt of the Khanjar not the scabbard that she altered and redesigned following, it is thought, the more ornate Indian style to which she was more attracted. This refined detail is important since it means that the 7 rings are older than 1850 (the assumed aproximate date of the redesign) and that the original dagger that she worked on must therefor already have had 7 rings. This places the Muscat dagger shown below as the likely contender for the origin of species at least of the Omani Royal Khanjar prior to its conversion... and is entirely logical since the rings are in fact not meant as a design feature but a technological engineering device which holds the whole scabbard together...and that was not what she was about... Artistic designer yes... Engineer no. HILT ONLY This places a very important couple of questions in the frame viz; 1. If the Asir (then Yemeni) variant known in Oman as Habaabi was copied from the The Muscat Khanjar when did this occur since it is now free from the constraints of the date line 1850 and may well be a much earlier transmission ? 2. If the Asir (then Yemeni) variant known in Oman as Habaabi is not related to the Royal Khanjar but to The Muscat Khanjar when did the transition occur and in which direction. Muscat > Yemen ? or Yemen Muscat ? I now request Forum to compare the Muscat Dagger to the Asir weapon and to sideline the Royal Khanjar since it is not related. For pictorial references to Asir variants see; http://www.flickr.com/photos/charlesfred/5512947198 http://www.flickr.com/photos/mytripsmypics/4336633417 http://www.flickr.com/photos/charlesfred/5780340287 http://www.flickr.com/photos/charlesfred/5780340299 http://www.flickr.com/photos/mytripsmypics/4318547823 Regards, Ibrahiim al Balooshi. |
1 Attachment(s)
Quote:
I could not resist to present this one :p ŕ + Dom |
All times are GMT +1. The time now is 06:23 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Posts are regarded as being copyrighted by their authors and the act of posting material is deemed to be a granting of an irrevocable nonexclusive license for display here.